GE (W)/HSR-27/2023-24 SPL REPAIR TO OR BATHROOM BLDG NO TL-201 202, 203 AND 204 OF 292 ARMD WKSP AT HISAR MIL STATION UNDER GE (W) HISAR AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-chanrge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer -in-charge.

Dismantling ceiling board with frame any description, fixed in any position with nails in unframed work.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified .

Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed

M&L preparation of new steel surface of any description over 10 cm width or grith and applying two coat of synthetic enamal paint over one coat of zinc chrome primer complete all as specified and directed.

T/D steel Ventilator n. exc 1.50 sqm each including repair to jambs with cement mortar complete all as specified and directed.

S&F factory made steel ventilators (Box type) with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without galzing bars dovetailed or welded including one shop coat of zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed Notes :- 1. The rate quoted by the contractor are deemed to be included for one coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. 2. Detail of box ventilator shall be given on drawing no TD/2013/01 sheet 1/3,2/3,3/3 3. Glass pan/wire gauze shall be measured and paid separately

Supply and fixing 3mm thick tinted sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specifed and directed

M&L preparation of new steel surface of any description over 10 cm width or grith and applying two coat of synthetic enamal paint complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L brick work with Sub Class 'B' bricks straight or curved on plan exc 6.0m mean radius built in cm 1:4 all as specified.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. etc complete all as specified.

M&L, 15mm thick rendering in CM 1:4 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement mixed with water proofing compound as per manufacturer’s instructions complete (WPC shall be measured and paid for separately as supply only).. etc complete all as specified.

M&L rough cast plaster as specified (rendering coat not less than 10mm thick in CM 1:3 while it is stil in plastic state the rough cast mixture consisting of cruhed stone or fine gravel aggregate size 6to12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished evevn on external wall upto cill height complete all as specified and directed.

M & L two coat of Weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces completeall as specified and directed by Engineer - in - Charge .

M&L of three coat of white wash on newly plastered surface as on wall including preparation complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided.

M&L Formwork to sides of concrete foundations, footings, slab,bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L RCC M-20(Nominal Mix) in slabs supported on walls, beams and columns complete all as specified and directed

M&L for precast RCC Nominal mix Type B0 1:2:4, 12.5mm graded aggregate as in Cover slab including necessary formwork complete all as specified and directed

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L of precast cement concrete louvres and jallies, 25mm thick Type Bo 1:2:4 (12.5mm graded agg.)(measured solid) in repair, including all mould but excluding frame Set in CM 1:4 all as specified and directed in repair.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames)

S&F made single extruded WPC (Wood Polymer omposite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold st/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed

S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed

S & F Stiainless steel butt hinges medium weight 100mm long complete all as specified and directed .

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specicfied.

S&F steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floors incl fitting complete all as specified

S&F steel water tubing galvanised 20mm bore, medium grade fixed to walls and ceiling or in floors incl fitting complete all as specified

Taking down eaves gutter or RWP of any description complete all as specified & directed by Engr-in-Charge. Including fittings

S&F, 110mm dia PVC bend any radius complete all as specified and directed .

S&F , 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F , 75mm dia PVC (SWR) junction double, (Single T) equal or unequal complete all as specified and directed

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in floor/trenches Completed all as directed. Including necessary demolition of pcc/rcc and excavation of soft/loose soil in trenches.refilling the soil after laid pipe in trenches and making good complete all as specified and directed

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in floor/trenches Completed all as directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as directed.

S & F inrepair Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply only water proofing compound.

S&F in repair vitreous china squatting pan ORISSA patter size 580 mmx440mm, white with integral foot rest including PVC/CI 'P' or 'S' trap and WC connector with leaping ring connecton to trrap including cement concrete and to flushing pipe anti syphonage pipe etc including making good to floor complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding and flush pipe)and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified.

S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete including all as specified.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified and directed .

S&F in Repair Vitreous China urinals, half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal) complete all as specifed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed .

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed .

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 500 ltr but n.exc 1000 ltr.

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colourcylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed .

S&F in repairs 15mm dia/bore CP central hole basin mixer long shank fixed to iron pipe complete all as specified and as directed. Series Mist Cat No 8550 Prayag or equivalent.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed

S&F 100mm dia PVC (SWR) vent cowl complete all as specified and directed

M&L for plain Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation ,filling and mass concrete complete all as specified and directed

M&L for Plain Cement concrete (1:3:6) type B-1 using 20mm graded stone agregates as in surface channels and drains etc

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed .

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as inin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed ® kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm ® complete all as specified and directed

S&F in Repair Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) ® complete all as specified and directed

Excavation in trenches n.exc 1.50 wide and n.exc 1.50 deep and getting out in any type of soil complete all as specified and directed

Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 200 mm) complete all as specified and directed .

Demolition and breaking up drain pipes (salt glazed ware or RCCor PVC) set in cement mortar 150 mm dia.

S&F 150 mm dia (6") PVC pipe of working pressure 4 Kg/cm2 single socketed in any length and joining pipes with adhesive solution inn laid in trenches or in floors complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed .

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25 cm thick soil complete all as specified and directed

Removing excavated soils n exc 250 m and depositing where directed at a level n.exc 1.50 m above starting point complete all as specified and directed .

S&F in repairs Brass CP three way wall mixer hot & cold water screwed down for iron pipe and fixed complete all as specified and das directed. Series mst cat No:8575 Prayag or Equivalent.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for 75 mm cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed .

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

All as per item No 91.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board

All as per item No 91.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board

All as per item No 91.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings with LED bulb 9 Watt complete all as specified and directed

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M&L for providing/cutting the round/ square hole of reqd size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing exhaust fan metal body heavy duty with louver, single phase , 230 volts 300 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side ( outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as specified.

Shiva Constructin Co.

RAJPAL SINGH CONSTRUCTIONS

Puja Traders

Siya constructions

PRINCE CONSTRUCTION

M/s Rao Constructions, 1173 Urban Estate-II, Hisar