Construction of Anganwadi Building at Kuruchi panchayat

Amount

Part 1 ONSTRUCTION OF ANGANWADI BUILDING AT KURUCHI PANCHAYAT

Earthwork excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation

Collection and supply of gritty gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying and filling in foundations and basement with filling sand in layers not more than 15cm. Thick well ramed, watered and compacted complete

Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Brick work in cement mortar 1:5 mix using country bricks 83/4"41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete

Blow basement

Above basement

Supplying & Erecting centering for sides & soffits including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90x60cm&10gauge stiffened, welded with steel angle of size 25x25x3 mm for boarding laid over silver oak joists of size 10x6.5cm spaced @ about 90cm and supported by casurina props of 10-13cm dia sapced @75cm etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2 for the following items.

Centering below GL

Column

Lintels, RCC Slabs, & sunshade

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick

Providing granolithic flooring with CC 1:2:4 mix 25 mm thick including cost and conveyance of all materials to site and all labour charges etc complete

Paving the Floor with Ceramic tiles 305x305x6mm thick including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size

Finishing the top of the roof with one course of Machine PressedTiles of size 20x20x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete ion and as directed by the departmental officers.

Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Fabrication and supply of mild Steel Doors and Windows of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18

Steel Door-D 2 (1.10 x 2.10 )

Steel Door-D ( 0.75 x 1.80)

Steel Door1 ( 0.90 x 2.10 )

steel window (1.2 x 1.30 m)

Ventilator ( 0.60 x 0.45 m )

White washing two coats using shell lime inculding cost and conveyance of all materials to site and all labour charges etc complete

Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete

Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete

Electrification

Light Point SD18

FanPoint SD 18

Tube Light 4.36w SD 87

Ceiling Fan SD 110

Exhaust fan PWD 116

service wire ( SD 66 )

Plug Point SD38

Bulk Head Fitting SD84

EB Main Board Single phase DB of 16A board ( SD 145 )

16Amps DPIC Switch of 500 V (SD142 )

Provision for IWC

Provision for water supply 1000 lit syntex tank and sanitary arrangements

Provision for Wash basin

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R C RAVICHANDRAN