PROVN OF OPEN VEH SHEDS FOR INF BDE UNDER GE EAST LUCKNOW.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and directed.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth or getting out any type of soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed.

M & L for mild steel TMT bars of 10 mm dia and over in reinforcement cut to length bent to shape required including cranking, bending spirally for hooping for cols, hooking ends and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 8 mm dia up to and including 10 mm dia in strriups,spaces,nibs and binders complete all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC M-25 (design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L RCC M-25 (design Mix) using 20 mm graded stone aggregateas in beams, bands, cantilvers, bressummers, linters over 1.5m span etc complete all as specified and as directed

Formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc complete all as specified and as directed .

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and as directed .

M&L for brick work with fly ash bricks using old size bricks on plan not exceeding 6.0 mtr mean radius built in cement mortar 1:4 complete all as specified and as directed .

M&L for rendering 15 mm thick in cement mortar ( 1:4 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and as directed .

M&L hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick , over rammed earth watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC1:4:8 type D2 using 40mm graded stone aggregate ,as in sub base of floor complete all as specified and directed

M&L 75mm thick Cement concrete type B-1,1:2:4 (20 mm graded stone aggregate) as in flooring laid in alternate pannels complete all as specified and as directed .

M&L Steel work in tubular trusses including special shapped washer etc., complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.

M&L Plates (plain or chequered) channel ,square cut or notched (ordinary and counter shunk) forming holes ,without any attachment Fe 410 -W (Gde -E-250 quality B complete all as specified and as directed .

S& F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specifed.

S& F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed .

M&L for preparation of newely plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and as directed.

M&L two coat synthetic enamel paint over red oxide zinc chrome primer of surfaces of any description over 10cm in width or girth not otherwise described complete all as specified and as directed .

M&L PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth course, coping, bed plates etc. complete all as specified and directed .

M&L Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed .

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch.

All as per Serial Item No 23 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size complete all as specified and directed.

Supply and fixing switch piano flush type, single pole, one way, 05 Amps complete all as specified and directed.

Supply and and fixing switch socket multipurpose combination 2 in 1, 6 pin, 05 and 15 Amps, flush type, universal complete all as specified and directed.

Supply and fix ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

Supply and fix of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC or equivalent in other specified make.

Supply and fix of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :-Legrand, Cat No. 5076 11 & 5079 13 or equivalent in Hager, Cat No : VYS08D & VYS08E or Schneider, Cat No : A9HSND08 & A9HSND08WB or equivalent in other specified make.

Supply and Fixing of MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

Supply and fixing of MCB SPN, 40 to 63 Amps, 240 Volts , curve 'c' breaking capacity 10KA complete all as specified and directed.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 06 Sq mm 2 core size complete all as specified and directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fixing LED street made up of pressure die cast alluminium housing with toughened glass and hi power light fitting 36 watt , water proof confirm to IP-65 complete all as specified and directed.

Supply and fixing MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 metre end of GI pipe suitable for street light fitting complete all as specified and directed.

M/S SWATI CONSTRUCTION

S B CONSTRUCTION AND ENVIRO

M/S Reliance Construction

Allied Builders And Engineers

QUALITY CONSTRUCTIONS CO