Certain repair to boundary wall and connected works at Shekhawaati grid in the AOR of AGE SLDC under AGE(I) (U) B/R Delhi Cantt-10

Amount

Dismantling posts or struts (wood,steel or R.C.C.) any section,including taking out embeded portion and making good disturbed ground complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins,pillars etc but excl ashlar facing,dressed work and precast concrete complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation, etc, for pipes, walls, cesspits, manholes, pier holes, cables etc and getting out complete all as specified and directed by Engr-in-Charge.

Returning, filling in, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed by Engr-in-Charge.

Removing of excavated soil to a distance out side MD Land and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:4:8) type D2 using 40mm graded aggregate for foundation filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for RCC type B1 1:1/5:3 (20mm graded aggregate) as in foundation, incl raft, footings foundation beams, plinth beams, bases for columns etc using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

M&L for RCC type B1 1:1/5:3 (20mm graded aggregate) as in columns etc using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

M&L for RCC type B1 1:1/5:3 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.50m span using 20mm graded stone aggregates complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides of concrete foundations, footings, bases of cols, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar works rough finished surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides of pillars, posts, struts, piers & columns rough finished surfaces of concrete for sqaures or rectangular and similar rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.

M&L for form work to sides and soffits of Plinth,Lintel & Roof beams rough finished surfaces of concrete complete all as specified and directed by Engr-in-Charge.

M&L for mild steel reinforcement TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

All as per srl item No.13 above but size 6mm dia to 8 mm dia as in stirrups complete all as specified and directed by Engr-in-Charge.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length as in weep holes complete all as specified and directed by Engr-in-Charge.

M&L for brick work with modular fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for MS work (flat iron, round bar) for grill grating and framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and countersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 including removing of old brackets and remove to store including necessary welding and nut & bolts including dismantlinng complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair face of brick work /concrete surfaces/ PCC block/stone masonry wall surface, including mixing liquid water proofing compound as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note:- WPC will be measured & paid separately

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for walling of stone random rubble, uncoursed , well bounded, bedded and solidly hearted , built in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for struck pointing to random rubble stone wall or to stone edges in floor, roof etc. built in cemet mortar (1:3) including racking out of joints complete all as specified and directed by Engr-in-Charge.

M&L for 20 mm thick approved shed Granite ( of any type ) work (table rounded and polished) in steps, hollow section and plate,coloumn,jambs, brick pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M/S GR construction compony (BID ID -3484746)

RIZCON (BID ID -3493227)

HANUMAN BUILDERS (BID ID -3487406)

Dhirendra Singh & Sons (BID ID -3487734)

M/S SIMRAN CONSTRUCTION CO (BID ID -3486857)