REPAIR/RESURFACING OF ROAD AT NURLA MIL STN UNDER AGE(I)NIMU

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm ( depth exceeding 50 mm but n. exc 100 mm) including stacking usable materials for re-use and removing rubbish to a distance n. exc 50 m complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick ( Compacted thickness) WBM with coarse aggregate of grading 2 ( 63 to 40 mm size) or of grading 3 ( 50 to 20 mm size) of granite, trap, or basalt, spread, rolled and consolidated to required gradient and camber complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 2 here-in-before but except aggregate obtain from item No. 1 complete all as specified and as directed by Eng-in-charge.

M&L for preparing unsurfaced water boumd macadam surfaces and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 10 Kg per 10 Sqm complete all as specified and directed by Engineer-in-charge.

M&L for premixed bituminious macadam with 4% of binder content by weight of total mix using paving bitumen VG-10 laid with self propelling mechanical paver, rolled & compacted with roller of 8 to 12 ton to required gradient and cabmer ( consolidated thickness upto maximum 75 mm) to make good the cut edges of roads etc complete all as specified and directed by Engineer-in-charge.

Repair to pot holes any depth not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc including cutting around edges to atleast 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again will rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm and directed by Engineer-in-charge.

M&L for Preparaing existing black top surafce by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surafces with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG-10 @ 5Kg/X Sqm complete all as apecified and as directed by Eng-in-charge.

M&L for Bituminous premixed asphaltic dense concrete 40mm consolidated thickness with 6% binder content usingpaving bitumen VG 10 by weight of total mix laid with self propelling mechanical paver, rolled and compacted with roller of 8 to 12 ton to required camber and gradient with power roller complete all as specified and directed by Engineer-in-charge.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards, size 3mX2m, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

S&F metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S&F in repair Solar road delinator having 6 LEDs of colours red/ yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminum alloy/plastic body, LEDs, solar-cells, battery and light sensor well protected inside by polycarbonate sheet, device protected with powder coated wire mesh cage, system mounted over 47mm dia steel tube powder quoted of length 600mm having sheet foot for firm grip to ground, system workable for 2-3 days (nights) after full charge for 8-10 hour complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new / old road surfaces and applying reflective thermoplastic road marking paint (White or golden yellow) of minimum 2.50 mm thick (conforming to BIS-3262), single coat as in centre line and edge line road marking of 150/ 100mm width using 'HOT MARK' by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler as specified in table 803.4 of MORTH specification, thermoplastic requirement for glass beads shall be as specified in (intermix) type-I, MOST/BS 6088A and road marking shall done as per provisions contained in IRC-35-1997, complete all as specified and directed by Engineer-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 17,790.00 and any other reduction if any from quoted amount.

Taru Enterprises Pvt Ltd

KONCHOK TSEWANG