COMPREHENSIVE MAINT TO N-5/N-6 AND OTHER ACCN ETC AND DAY TO DAY MAINTENANCE TO SMC, HQ ACCT SECTION AND VARIOUS GUARD POST UNDER AGE B/R- II AT AFS CHAKERI KANPUR

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

All as item No 2 above but except bricks

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

S&F in repairs of of Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed by Engr-in-charge.

S&F in repairs of PTMT bib tap for 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repairs PTMT stop cock for 15mm dia pipe with crutch or butterfly handle screwed iron pipe or for brass ferrule complete with check nuts 15mm complete all as specified and directed by Engr-in-charge.

S&F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe, complete all as specified and directed.

S & F in repairs PVC waste pipe 32mm dia, 90 cm long for WHB/Sink/urinal with cup, complete all as specified and directed.

S&F in repairs PTMT Health faucet incl flexible pipe of 1.5m length and fixing brackets and fixed as per manufacturers instruction complete all as specified and directed.

S&F in repairs of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

S&F in repairs of PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron clamp for proper fixing complete all as specified and directed by Engr-in-charge.

All as per sl item No 15 but refixing only including taking down existing old pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of PVC (SWR) bends 110mm dia complete all as specified and directed by Engr-in-charge.

Taking up or down PPR/GI tubing 15 mm bore pipe complete all as specified and directed by Engr-in-charge.

Taking up or down PPR/GI tubing 20 mm bore pipe complete all as specified and directed by Engr-in-charge.

S&F of 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

All as per sl item No 20 but 20mm dia complete all as specified and directed by Engr-in-charge.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including all fittings and necessary clamps etc. complete all as specified and directed.

S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket ,32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and directed by Engr-in-charge. Note: Pillar tap shall be measured under respective item.

S&F in repairs of PVC low level cistern of 10 litre capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

Taking down and refixing of old steel tubing connection in new or old position (wall etc) including cleaning for refixing bore of pipe 15mm dia including connected GI fittings complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 29 above but 20mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 29 above but 25mm bore of pipe including connected GI fittings complete all as specified and directed by Engr-in-charge.

S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, reducer, nipple, tee, union, tank nipple, tank connection and other GI fittings etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 32 above but 20mm GI fitting (ISI marked) complete all as specified and directed by Engr-in-charge.

All as per Srl Item No 32 above but 25 mm GI fitting (ISI marked) complete all as specified and directed by Engr-in-charge.

S&F in repairs of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.

Easing of wooden door shutters/Almn door/PVC door shutter/Almn window for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolt complete all as specified and directed by Engr-in-charge.

Refixing Aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.5 Sqm each in the same opening after taking down, easing and adjusting including fixing new top/bottom/side rails as required at site and refixing builders hardware as required and renewal of unserviceable screws including bottom rod and all required accessory complete all as specified and directed.

S&F in repairs of 125 mm fancy type shower rose brass chromium plated with C P arms for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of CP pillar tap 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down complete all as specified and directed by Engr-in-charge.

S&F in repairs of for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and directed by Engr-in-charge.

S&F in repairs of for PVC tank cover for 500/1000 ltr PVC over head tank including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVC nut bolts and arolite complete all as specified and directed by Engr-in-charge.

S&F in repairs of CP Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (anythickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for Sheet glass 3.0mm thick ,ordinary qualityand glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F figured glass 3mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

M&L for Sheet glass 4.8mm thick ,ordinary qualityand glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F tinted glass, 5.5mm thick and glazing complete with beads fixed with brass screws size exc 0.50 Sqm each pane complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 Sqm and n exc 4.00 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.

Taking down of shutters of any description exc 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engr-in-charge.

Taking down of shutters of any description exceeding 2 Sqm complete all as specified and directed by Engr-in-charge.

M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bare of 10mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh 0.36 mm nominal dia and 1.40 mm aperture & guard bar/Grill included in above rates & PCC for pressed steel frame will be measured and paid separately.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed by Engr-in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing including butt hinge,handle,tower bolt,and other fittings complete all as specified and directed by Engr-in-charge.

S&F of 35 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-charge.

S&F of factory made glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.23 (a), in IInd class hard wood, thickness of shutter 35 mm complete all as specified and directed by Engr-in-charge.

S&F Butt hinges, medium weight cold rolled mild steel 100mm complete all as specified and directed

S&F Butt hinges, medium weight cold rolled stainless steel 100mm complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in mm 200 complete all as specified and directed.

S&F for aluminium alloy anodized sliding door bolt with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

S&F extruded anodised aluminium alloy handles fabricated type 150mm complete all as specified and as directed.

M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick square or rectangular of size exc 0.18 but not exc 0.38 sqm in floors laid over and including 15 mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for glazed coloured ceremic joint free tiles in vertical surface 600X300 /450x300 mm size 7-8 mm thick or as required, set over and cncluding 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in cm (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in cm (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement including taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of primer complete all as specified and directed by Engr-in-charge.

All as per sl item No 71 but on ceiling complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old distempered surfaces of walls including corinces pillars etc and applying one coat of Oil Bound Distemper complete all as specified and directed.

All as per sl item No 74 here-in-before but on ceilings ,complete all as specified and directed..

All as per item No. 74 but two coat two coat of oil bound distemper, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

All as per sl item No 77 but applying two coat of cement based paint, complete all as specified and directed.

Dismantling of wall and ceiling boards any type (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S&F 16mm thick of size 600 x 600 mm mineral fibre false ceiling system of pattern classic lite RH 99 (bevelled tegular ) of Armstrong or equivalent make and model including grid system using hot dipped galvanised steel section, exposed surface with pre-powder coated capping ,main runner and cross runner and to comprise main tee/runner 15 mm x 38mm size (load carring capacity 14 kg /sqm ) spaced at 1200 mm centres securely fixed to the structural sofit and flush fitting 1200 mm long cross tee/runner to be interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm module , cut sub cross tee/runner 600mm require independent support ,wall angle of size 19mm x 19mm secured to the periphery of the wall at 450 mm maximum centre the above grid is suspended at every 1200 mm centre to centre in both direction and starting from wall at the distance 350mm, complete all as specified and directed

Supply and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moister content less than 2%, humidity resistant of 99%, NRCO.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% minimum to be laid in true horizental level suspended on inter-locking metal T-Grid of hot dipped galvanised ireon section of 0.33mm thick (galvanised @120gm/Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross T of size 15 x 32 mm of length 1200mm and secondary intermediate corss T of size 15 x 32 mm of length 600mm to from grid module of size 600x 600 mm suspended from ceiling using galvanised mild steel items (galvanised @ 80gm/Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifiection, drawing and as per directed of Engineer-in-Chagre.

Refixing only the depressed/sagged portion of existing false ceiling grid system of any description after taking down existing ceiling board of any description and refixing the same in position. Note- The quoted unit rate include supply and fixing 4 mm dia GI bar hanger and fly clip if required in refixing.

S&F 16 mm thick of size 595 x 595mm or 600 x 600 mm mineral fibre false ceiling board of pattern classic lite RH -99 (Bevelled tegular) of armstrong or equivalent make specified including taking down old ceiling board from existing snap grid complete all as specified and directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill as directed : Make : Deco Cat Part No 104 or Equivalent.

Labour only in adjustment of the float valve or ball valve or lever or handle without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge.

S&F in repairs of float valve of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed weight-142 gm for 15mm dia pipe complete all as specified and directed by Engr-in-charge.

All as per sl item No 87 but 20 mm bore pipe weight 210 gm complete all as specified and directed by Engr-in-charge.

All as per sl item No 87 but 25 mm bore pipe weight 455 gm complete all as specified and directed by Engr-in-charge.

S&F 45cm long PVC connection with two Nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge.

S&F 60cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge.

Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper wall etc complete all as specified and directed by Engr-in-charge.

Petty repairs of low level flushing cistern any size/description for repairs of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-charge.

M&F for Welding at site in position MS butt hinges and projecting type hinges, exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded n.exc 6mm thick complete all as specified and directed by Engr-in-charge.

S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 150mm size, complete all as specified and directed by Engr-in-charge.

S & F in repairs extruded aluminum alloy handle, fabricated type, anodized 75mm size,complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 200 mm long,complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 150 mm long, complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminum, anodized, barrel tower bolts of extruded section 100 mm long, complete all as specified and directed by Engr-in-charge.

S & F in repairs aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr-in-charge.

S & F in repairs Butt hinges medium weight, cold rolled mild steel 100mm size complete all as specified and directed by Engr-in-charge.

S & F in repairs Butt hinges medium weight cold rolled mild steel 75mm size complete all as specified and directed by Engr-in-charge.

S & F in repairs 150 mm, ordinary rat tail rod pattern springs of MS including roller and roller plate, complete all as specified and directed by Engr-in-charge.

S & F in repairs Door closer hydraulically regulated, aluminium body(die caste), designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, complete all as specified and directed by Engr-in-charge.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed by Engr-in-charge.

S& in repairs of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge.

M&L for 18 to 20mm thick Granite work (table rubbed and polished) of Lakha Red or Telephone Black colour for shelves, counter slabs, floors etc. in 15mm backing of CM (1:4) and pointing with white cemeat (mixed with suitable colour) (1:2)using marble dustwith admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) including cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and directed by Engr-in-charge.

S&F in repairs Prelaminated particle 12mm thick board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.

M&L for double charged dark shade Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles and removing the same from site, complete all as specified.

M&L for double charged dark shade Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/skirting etc. over and including 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified.

Labour only fixing of soap dish/ towel rod/ towel rack/ glass shelf/ looking mirror/ towel ring/ plate rack/ etc compete all as specified and directed.

Labour refixing of all type of CP bath/ kitchen fittings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge or thickness at any position or similar pattern of roof covering complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating 150gsm, ISI Marked GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating 150gsm, ISI Marked GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge to match the existing roof coverings, fixed with self tapping screws complete all as specified and directed.

M.M.V. CONSTRUCTIONS (BID ID -3270327)

M/S SDS Construction Co. (BID ID -3271025)

M/S ASM ENTERPRISES (BID ID -3270320)

B R CONSTRUCTIONS (BID ID -3270134)

M/s DKS Engineering Works (BID ID -3271744)

AMRENDRA CONSTRUCTIONS (BID ID -3271720)

M/s R.V. Constructions (BID ID -3268960)