Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹19,200
Closing Date
3 May 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
EXECUTIVE ENGINEER
Providing painting, polishing vetrified tiles, UPVC windows, vinyl flooring, renovation of toilets & kitchen and other allied works to the Room No 537 in LH-4, Bangalore
PWD/2025-26/BD/WORK_INDENT21319
PWD/2025-26/BD/WORK_INDENT21319
Open
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
4 documents required · 4 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b)Satisfactory completion as prime contractor in similer civil engineering construction works to an extent of 50% of the cost of the work i.e. Rs 3.82 Lakhs
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 7.64 lakhs
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 3 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 3 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
nil
nil
₹500
₹19,200
25 Apr 2025
25 Apr 2025
5 May 2025
29 Apr 2025
Providing painting, polishing vetrified tiles, UPVC windows, vinyl flooring, renovation of toilets & kitchen and other allied works to the Room No 537 in LH-4, Bangalore
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved...
Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as pe...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materi...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in...
Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...
Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work
Supplying and fixing jaguar make Rimless wall hung china clay water closet (Code no.81953-VGS) with heavy duty double flapped seat cover etc., complete. The rate inclusive of all materials, labour for...
Providing and fixing table top jaguar make wash hand basin of size 20"x16"x6"conforming to IS specification with necessary accessories etc., complete. The rate inclusive of all materials, labour for a...
Supplying and fixing Jaguar make Health Facet with 1.00m flexible aluminium coated tube and hook including necessary screws, accessories etc., etc., complete. The rate including necessary threads, whi...
Supplying and fixing Jaguar make heavy duty Angle cock with necessary wall flange, threads, white lead, washers etc., complete. The rate including necessary threads, white lead washers, all labour cha...
Providing and fixing jaguar make heavy duty Long body pillar cockwith necessary threads, white lead, washers etc., complete. The rate including necessary threads, white lead washers, all labour charge...
Providing and fixing Curtains rods of size 25mm dia, Stainless Steel of heavy gauge pipe with stainless steel and brackets and stainless steel supporting double brackets and L Brackets Wherever necess...
Providing and fixing wall paneling, over the 50mm x35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled with 50mm thick 32kg density glass wool and top covered out of 1...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
21319.docx
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .