Tender for setting Up of Blood bank and Blood Component Separation Unit on turnkey basis at Govt. Medical College, Shivpuri in the State of Madhya Pradesh

Amount

Blood Donor Couch (Fully Automatic)

Portable Donor Couch

Donor Weighing Scale (Weighing Machine)

Blood Collection Monitor cum Mixer

Blood Collection Monitor Portable for camp

Blood Bag Tube Sealer

Tube Sealer hand held with battery backup

Blood Bank Refrigerator (150 Bags) 2°C - 8 °C

Deep Freezer (Plasma Freezer) -40 °C (180 Litres)

Automatic Micro Plate Washer

ELISA Reader with Printer

Blood Bag Weighing Scale

Blood Bag Tube Stripper

Binocular Microscope

Micropipettes (Variable Volume)

VDRL Shaker

Slide Viewing Box

Centrifuge (Table Top) digital display

Water bath Serological 2 Racks capacity

Incubator Digital Temp (Size 35x35x35 Cms Approx.)

Hot Air Oven (Size 35x35x35 Cms Approx.)

Laminar flow Bench type

Laboratory Refrigerator (2°C - 8°C for kits 250 Ltrs)

Ice Lined Refrigerator ILR (130 Ltrs)

Domestic Refrigerator double door with stabilizer & Stand (250 Ltrs)

Digital Haemoglobinometer with disposable cuvettes

Autoclave Vertical (75 Ltrs with Digital Display)

Portable Blood Bank Refrigerator (Nano cool)

Blood Transportation box Portable (25Ltrs)

Blood Transportation box Portable (50Ltrs)

Wall mounted thermometer

Digital Thermometer for Refrigerator

Needle Destroyer

BP Apparatus

Stethoscope

Test Tubes Racks (36 Holes)

Wash bottle 500 ML Plastic

Wall Clock

TV LED 32 ''

Desktop Computer with Laser printer

Platelet Incubator 125 Ltrs

Agitator 24 bags

Ultra low refrigerator FFP - 80oC (150 Bags)

Plasma Refrigerator - 40oC (150Bags)

Refrigerated Centrifuge (8 Bags Slots) Indian (Make)

Plasma Expresser cum Extractor Manual

Plasma Expresser cum Extractor Automatic

Plasma Thawing Bath

Cryo bath

Gel Technology for blood group

Digital Analytic Balance Single pan

Sterile Connecting Device

Aphaeresis Couch

Medical Information System

Description of Work / Item(s)

Amount

Civil Work

ALUMINUM WORK

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atj unctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge : Powder coated aluminium (minimum thickness of powder coating 50 micron)

S/F 100mm brass lock for aluminium door including necessary cutting and making good etc. complete :

Providing and fixing aluminium tower bolts (100*10mm) ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in- Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment.)

Providing and fixing aluminum tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineerin-Charge. Anodized (AC 15 ) aluminum tubular handle bar

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. With twin rubber stopper

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With Brass cover Plate

illing the gap in between aluminium/ stone/wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer- in-charge complete, complying to ASTM C920, DIN.18540-F & ISO 11600. Upto 20 mm depth and 20 mm width

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-inCharge. Pre-laminated particle board with decorative lamination on both sides

FLOORING

Providing & laying first class full body vitrified ceramic tile of make Kajaria/ Restile/Johnson or equivqlent of size 600mmx600mmx 9.5mm or approved size of approved colour (matt finish) in flooring using spacer of required size (2mm-4mm) from endura or equivalent over a bed of cement mortar 1:4 of required thickness to match finished floor level mentioned and to match the neighbouring floor finish and jointed with epoxy grout of approved shade from Bal Endura or equivalent brand all complete as directed.(Basic cost of tile - Rs.85/sft).Any difference in basic price and OHP at the time of approval shall be adjusted for the laid area.No extra shall be payable for forming any pattern in the flooring like border, cut tiles,etc.

Providing and laying 600mm x 600mm or required size from Kajaria/ Restile/Johnson glazed tiles of plain series(Satin finish) in dado set in CM 1:3 with joints so as to form a true & even surface and joints finished neatly with white cement mixed with matching pigments all complete as directed. (Rate should include base plastering with CM 1:5 of required thickness.) The rate shall include cost of providing 6mmx6mm groove in the plastering at top of the tile all complete as directed.(Basic cost of tile - Rs.85/sft).Any difference in basic price and OHP at the time of approval shall be adjusted for the laid area.No extra shall be payable for forming any pattern like border, etc

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and fixing 40 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more.

MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

PLASTERING

Prepare surfaces and plaster with CM 1:5(1 cement, 5 sand) ,12mm minimum thick to all interior faces of walls (sponge finish) including RCC surfaces not contiguous to masonry.Necessary internal grooves of size 10mmx10mm shall be carried out as shown/directed by engineer-in-charge.

PAINTING

Prepare surfaces and paint two coats of plastic emulsion paint of approved colour over two coats of Gypsum punning of 6 mm minimum thick and primer all complete as per manufacturers specifications to all ceilings in all floors.

Finishing with oil bound washable Interior Emulsion of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Painting wood work with Deluxe Multi SurfacePaint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing with Deluxe Multi surface paint system for exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm

DISMANTLING

Dismantling plastered brickwalls in cement mortar including cleaning, stacking the useful materials as directed by engineer-in-charge and dumping the dismantled debris as indicated at site, levelling, consolidating, all complete as directed and disposing the debris away from site all complete as directed.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).

Dismantling Tile Flooring and Walls & Roof and disposing the debris away from site all complete as directed.

PLUMBING

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. Brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls whereever requires : white vitreous china wash basin size 650*450 mm with a pair of 15 mm C.P. Brass pillar taps. Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc 20 mm nominal outer dia .Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc 50 mm nominal outer dia Pipes

Providing and fixing PVC Waste pipe for sink or wash basin including PVC waste fittings complete.:Semi rigid pipe 32mm dia

Providing and fixing CP Waste coupling for wash basin and sink of approved quality, colour and make. Waste coupling 31mm of 79mm length and 62mm breadth, weighing not less than 45 gms. Make:Hindware,Jaquar etc..,

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

CURTAIN WORK

1.Two range of curtain cloth – Type 1 - II. 2. Both for doors, windows and partions. 3. Assorted colours plain & prints 4.Stitched as per site/ size requirement 5.Minor modifications in stitching as per site/ size requirement 6.Preferred colour (Brown, Cream, Beige) 7.Curtain price (including cloth & curtain rod) to be quoted in Squre metre 8.Stitching for each curtain to be absorb in the price of the cloth generally 2 meters. 9.Fast colours, water wash 10.Fabric density Non Transparent Composition 11.Fabric of curtain shall be soft texture, great shading, drape effect and nice dobby. 12.The bracket shall be side mounted and front mounted as required 13.First rod mount is 3.5 inches from the wall. 14.Where curtain used as a partition/ long length, sufficient support from ceiling should be provided to avoid sagging. 15.Rate quoted for fully stitched Curtain with top nepha with punch holes after lining bucramreinforced with SS / PVC islets and lower nepha 200mm double turned Type -I (Surgical Curtain) Curtain fabric weight shall be up to 275-300 (±5%) gsm Composition of fabric shall be polyester yarn I.E. 300 denier fast colour sink age shall be (±5%) Weft and warp shall be polyester / cotton polyester mix

Type - II (Window & Door Curtain) Curtain fabric weight shall be up to 250-275 (±5%) gsm Composition of fabric shall be polyester yarn I.E. 300 denier fast colour sink age shall be (±5%) Weft and warp shall be polyester / cotton polyester mix

Providing and fixing of vertical/roller blinds width 100 mm regular quantity made from 100 % polyster/Fibre yarn coated with fade resistant polymer to ensure complete opaquety with zero light transmittance, having suitable coating on exterior, including all fixtures and fittings complete in all respect as per design and instruction of Engineer in-charge and as per site conditions. The colour will be approved by the competent authority Make-MAC/VISTA/NOVA or any equivalent make.

Providing and fixing of Two Tap Scrub Station as per the specification as follows 1.Deep sloping basin 2. Two High mount spout/taps with elbow operated flow regulator (length of flow regulator approximately 18-24cms) 3. Tap should have provision for manual aeration of water 4. 304 stainless steel polished and ground 5. Wall Mounted Design with provision for back panel wall bracket fixation 6. Provision for Scrub Solution Stand with long handle for pumping 7. Sizes a. Width – Approximately 130-140 cms b. Height of Back Panel of sink – 90 -95 cms c. Height of Sink from Ground – 100-110 cms d. Depth of Sink from Top of the Sink – 40-45 cms e. Height of Tap from the top of the sink – 25-28 cms f. Gap Between two taps – 65- 68 cms g. Protrusion of Sink from Wall – 45-50 cms

SIGNAGES & FURNITURES

Supply and fixing bilingual signage (Hindi & English) or only English. The signage letters will be made with premium quality vinyl sheet of approved colour, pasted on 3mm thick acrylic sheet and 1” studs complete. The floor plans will be fixed on the wall with the help of screws and double tape etc. to give neat & finished look. 21”X 4” (84 Sq. inch )

Providing and fixing LED (1.2 watt each of reputed make such as M/s Samsung or equivalent,) signage of NIB on flat roof top as per the given sketch including designing & fabrication of mild steel structure for holding the signage. The letter will be made in approved colour with acrylic sheet and waterproof LEDs and outdoor type transformers will be used in the signage. The mild steel structure will be anchored with the brickwork by using anchor bolts etc. so as to withstand high pressure wind/ storm, complete work including s/o a M.S. ladder from lower roof top to signage site roof top for working & future maintenance, s/o all T&P etc. required for proper completion of the work. The design of structural steel will be got checked and signed by a structural engineer before execution of the work.

Providing & Fixing mid back chair .The seat & back are made up of 12mm thick hotpressed plywood, upholstered with fabric & moulded with Polyurethane foam seat and back covers. The back foam should designed with contouredlumbar support for extra comfort .The seat has extra thick foam on front edge to give extra comfort.Mid back size 475 mm Width x 580 mm Height mm. And seat size 470 mm Width x 480 mm Thepolyurethane foam should bemoulded with density = 45 kg/m3 and hardness = 16 +/2 kg on hampdem machine at 25% compression.Armrest are injection moulded from black copolymer polypropylene. The mechanism should befixed 360 degree revolving type,Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm. The pedestal should be injection moulded in black 33 % glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch- center diameter.

Supplying and fixing of Three Seater Waiting Area Visitor Chairs · Non-Magnetic SS perforated sheet seat and back shell made of high quality steel makes it strong and durable. · 1608mm (L)X 695 (H) X 555 (D). Legs and Armrests are made of cold rolled steel and are chrome plated for long life. Armrest and legs are anti rust and anti scratch.

Providing and Supplying table of size 1350W x 750 D x 750H, whose work surface is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. The modesty panel is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. The rectangular frame is fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coated (Epoxy polyester). The leg is Fabricated component in 38mm x25mm x1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester).The leveler glide for leg is Nylon 6 & MS Bolt. The shell and drawer tray are made of 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).The drawer front is 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester) and frame assembly is 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Providing and Supplying shoe rack of size 1175W x1175 H x 375 D, whose work surface is made of 25mm thick. Pre Laminated Particle Board (PLB) OR Engineered Wood All work surface edges are duly sealed with 2mm thick PVC Edge banding. The modesty panel is made of 18mm thick. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edge banding. Powder coat (Epoxy polyester). Brand: Evok OR Equivelent Assembly: Carpenter Assembly Dimensions: 1175W x 1175 H x 375 D Primary Material: Engineered Wood Room Type: Living Room

Providing & Fixing Sofa-2 seater. Size: 1320 mm (W) x 835 mm (D) x 690 mm (H) Seat Height from gound 415 mm. Frame is made up of Tropical Solid Wood with syntheatic leather Upholstery,Seat Foam : Polyurethane Foam with recron layer.Foam Density : 18 kg/ cubic cm. Back Foam : Polyurethane Foam with silicon fill at arms. Foam Density : 22 kg/cubic cm S-Spring webbing.The Sofa is based on wooden legs

Providing & Fixing HIGH back executive chair .The seat & back are made up of 12mm thick hotpressed plywood, upholstered with fabric & moulded with Polyurethane foam seat and back covers. The back foam should designed with contouredlumbar support for extra comfort .The seat has extra thick foam on front edge to give extra comfort.Mid back size 475 mm Width x 580 mm Height mm. And seat size 470 mm Width x 480 mm Thepolyurethane foam should bemoulded with density = 45 kg/m3 and hardness = 16 +/2 kg on hampdem machine at 25% compression.Armrest are injection moulded from black copolymer polypropylene. The mechanism should befixed 360 degree revolving type,Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm. The pedestal should be injection moulded in black 33 % glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch-center diameter.

Providing and supplying and fixing wooden cupboard with drawers (12no.) Specifications: 19mm commercial ply with ISI brand, neem core, inside and outside laminate finish with heavy duty stelesopic drawer channel. Load for each drawer channel will be 50Kg Size: 2400mmlength/600mmdepth /900mm height

Providing and supplying and fixing wooden cupboard with drawers (8no.) Specifications:19mm commercial ply with ISI brand, neem core, inside and outside laminate finish with heavy duty stelesopic drawer channel. Load for each drawer channel will be 50Kg Size:1800mmlength/600mmdepth /1800mm height

Supply of the FEATHERLITE Versaline Executive Table as per the Featherlite specifications . 1.V-MT 1890, W 1800 x D 900 x H 750 2. V-ST 1245 (LH & RH), W 1200 x D 450 x H 750 and 3. V-CZ, W 1200 x D 450 x H 750

ELECTRICAL WORKS

Point wiring in PVC conduit with modular type switch.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring through PVC conduit

Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.(Make:Havells/Finolex/V-guard/Polycab) 2X1.5 sq.mm + 1X1.5 sq.mm earth wire

Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.(Make:Havells/Finolex/V-guard/Polycab) 2X2.5 sq.mm + 1 X2.5 sq mm earth wire

Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.(Make:Havells/Finolex/V-guard/Polycab) 2X4 sq.mm + 1X4 sq.mm earth wire

Telephone wiring in existing conduit:

Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Modular type blanking plate:

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Modular boxes, bases & cover plate:

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 2 module

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 module

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 module

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 module

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 module

Modular type switch/socket:

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 5/6 Amps switch

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 3 pin 5/6 Amp socket outlet

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 15/16 Amps switch

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 6pin 15/16 Amps (universal) socket outlet

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. Telephone socket outlet

S/F PVC conduit:

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(ISI Make) 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(ISI Make) 25 mm

S/F of SPN MCB PDB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way Double door, horizontal type

S/F OF SP MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 A SP MCB

S/F DP ISOLATOR

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, ISOLATOR having a sensitivity current upto 100 to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc, as required.(Make: Legrand/Havells/HPL) 40 A

S/F DP RCCB

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Miscellaneous Items

Miscellaneous electrical work, removing of existing conduits and interconnections of light,6A socket/16A socket/A/C point from exisitng DB

CABLE SUPPLY

Supplying the following PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade as per CPWD standards as required (Make:Havells/ Glostar/Nicco/Finolex/Polycab).2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( 3 Nos. of 4 Sq.mm wire)

Description of Work / Item(s)

Amount

Blood Donor Couch (Fully Automatic)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Portable Donor Couch

2nd Year

3rd Year

4th Year

5th Year

6th Year

Blood Collection Monitor cum Mixer

2nd Year

3rd Year

4th Year

5th Year

6th Year

Blood Collection Monitor Portable for Camp

2nd Year

3rd Year

4th Year

5th Year

6th Year

Blood Bank Refrigerator (150 Bags) 2*C - 8*C

2nd Year

3rd Year

4th Year

5th Year

6th Year

Deep Freezer (Plasma Freezer) -40 °C (180 Litres)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Automatic Micro Plate Washer

2nd Year

3rd Year

4th Year

5th Year

6th Year

ELISA Reader with Printer

2nd Year

3rd Year

4th Year

5th Year

6th Year

Binocular Microscope

2nd Year

3rd Year

4th Year

5th Year

6th Year

VDRL Shaker

2nd Year

3rd Year

4th Year

5th Year

6th Year

Centrifuge (Table Top) digital display

2nd Year

3rd Year

4th Year

5th Year

6th Year

Water bath Serological 2 Racks capacity

2nd Year

3rd Year

4th Year

5th Year

6th Year

Incubator Digital Temp (Size 35x35x35 Cms Approx.)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Hot Air Oven (Size 35x35x35 Cms Approx.)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Laminar flow Bench type

2nd Year

3rd Year

4th Year

5th Year

6th Year

Laboratory Refrigerator (2°C - 8°C for kits 250 Ltrs)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Ice Lined Refrigerator ILR (130 Ltrs)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Domestic Refrigerator double door with stabilizer & Stand (250 Ltrs)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Digital Haemoglobinometer with disposable cuvettes

2nd Year

3rd Year

4th Year

5th Year

6th Year

Autoclave Vertical (75 Ltrs with Digital Display)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Portable Blood Bank Refrigerator (Nano cool)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Platelet Incubator 125 Ltrs

2nd Year

3rd Year

4th Year

5th Year

6th Year

Agitator 24 bags

2nd Year

3rd Year

4th Year

5th Year

6th Year

Ultra low refrigerator FFP - 80oC (150 Bags)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Plasma Refrigerator - 40oC (150Bags)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Refrigerated Centrifuge (8 Bags Slots) Indian (Make)

2nd Year

3rd Year

4th Year

5th Year

6th Year

Plasma Expresser cum Extractor Manual

2nd Year

3rd Year

4th Year

5th Year

6th Year

Plasma Expresser cum Extractor Automatic

2nd Year

3rd Year

4th Year

5th Year

6th Year

Plasma Thawing Bath

2nd Year

3rd Year

4th Year

5th Year

6th Year

Cryo bath

2nd Year

3rd Year

4th Year

5th Year

6th Year

Gel Technology for blood group

2nd Year

3rd Year

4th Year

5th Year

6th Year

Sterile Connecting Device

2nd Year

3rd Year

4th Year

5th Year

6th Year

Aphaeresis Couch

2nd Year

3rd Year

4th Year

5th Year

6th Year

Medical Information System

2nd Year

3rd Year

4th Year

5th Year

6th Year