Electrification of Community Hall Village Pilail at Billawar Kathua

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLs PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate suitable G.I box and earthing the point with 1.5 sq.mm FRLs PVC insulated copper conductor single core cable make Polycab, Anchor, Havell, Syska ,Biocon

Wiring for circuit/sub main wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required Make Havells, KEI, Polycab, Gloster ,Biocon

2x1.5 sq.mm + 1x1.5 sq.mm earthwire

2x2.5 sq.mm + 1x2.5 sq.mm earthwire

2x4 sq.mm + 1x4 sq.mm earthwire

2x6 sq.mm + 1x6 sq.mm earthwire

2x10 sq.mm + 1x6 sq.mm earthwire

Supplying and drawing following sizes of FRLS PVC insulated 10 sq mm armoured copper conductore in the existing surface/recessed steel/ PVC conduit as required. Make Havells, KEI,Biocon, Polycab, Gloster

Supplying and fixing following size/module, GI box alongwith modular base and cover plate for modular switches in recess etc. as required Make Havells, Legrand, Anchor roma,Syska,Biocon

1 or 2 Module (75mmX75mm)

8 module (125mm x 125mm)

12 Module (200mm x 150mm)

18 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as reqd.Make Havells, Legrand, Anchor roma,Syaka,Biocon

1 or 2 Module

8 Module

12 Module

18 Module

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as reqd.Make Havells, Legrand, Anchor roma,Syaka ,Biocon

Supplying and fixing 5A to 32A rating, 240/415 A, 10 KA, C curve, miniature circuit breakes suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make Havells, L&T, C&S,Syaka , Biocon

Single pole

Single pole and neutral

Triple pole and neutral

Supplying and fixing following rating, double pole, 415 V, isolater in the existing MCB DB complete with connections, testing and commissioning etc. as reqd. Make Havells, L&T, C&S,Syaka , Biocon

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V on surface/recess complete with finned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted incld. earthing etc. as reqd. Make Havells, L&T, C&S,Syaka , Biocon

4 way (4+12), Double door

8 way (4+24), Double door

Supplying and fixing following modular switch/ socket on the existing switch box/cover incld. connections etc. as reqd. Make Havells, Anchor(ROMA) , Biocon

5/6 A, Switch

15/16 A, Switch

3 pin, 5/6 A socket outlet

6 pin, 15/16A socket outlet

Supplying and fixing two module stepped type electronic fan, regulator on the existing modular plate, switch box including connections but excld. modular plate etc.Make Havells, Legrand, Anchor roma, Biocon

Supply, Installation, testing and commissioning of Ceiling Fans 48"inch fitting with extended pipe of 2-5 ft. as per requirement on site make Usha, Orient, Havells , Biocon

Supply, testing and commissioninng of 28 w, 220 V, wall mounted electronic LED tube make Philips, Syska, Orient , Biocon

Supply and fixiing of Slim surface /Recess LED flat panel light made extruded aluminium frame with high efficient LED and glass free opal diffuser make Havells, Orient, halonix, Syska, Biocon

Supply, testing, fixing and commissioning of 200 watt high mast light with the help nut/bolt of appropriate size as per the instructions of Engineer-in-charge. make Syska, Havells , Biocon

Supply, testing, laying and commissioning of 35 sq.mm 3.5 core armoured cable by digging trunch of 1.5 x 1.5 feet and laying conductor in HDPE pipe PN 10/PN8 ISI marked, protection and covering it back with soft sand as it was earlier.

Supply, Testing , Fixing and Commissioning of 35 x 4 core Outdoor type termination kit Make 3M, Raychem, Yamuna Densons

Supply, Installation, Testing and Commissioning in replacement of factory made LT feeder pillar box Outdoor type ,floor mounted, double door, cubicalcmpartmentalized type suitable for 415 volt 3 phase, 4 wire, chamber with insulated aluminium busbar 250 Amp rating(100% neutral) insalled on porcelain insulators. The panel shall be dust and vermin proof fabricated out of 1.2/1.5 mm Stainless steel foamed in PU gasket ,finish, panel mounted on frame having 4 nos lags 45cm long, 15 cm grouted in PCC of ratio 1:3:6. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size,thimbling and cable entry boxes with cable glands. The panel should be IS/IEC 61439-I- TTA. The panel builder should submit test certificte along with GA drawing before executing the job.Digital Volt & Amp Indicator R,Y,B. The scope of work also includes supply and fixing the following :- Make : Electricfield, Powercontrol.

Incomer

63A 4 Pole microprocesser baced 25 KA MCCB -1 No. for protection against Earth, short circuit and over current Fault.

Outcomer

Bushar shall be Aluminium TPN 250A duly supported on DMC insulators and covered with heat shrinkable color coded PVC sleeves.

32 A 4 POLE MCB 10 KA - 2 No

Make of MCCB/Contactor/TimeSwitch/SPD: Schneider (Acti-9), Legrand (DPX3), Siemens (Betagard)/L&T

Chemical Type Maintainance free earthing with 3 MTR 50 MM GI electrode with Conncetion of panel/high mast with 25x3 mm GI Strip Make JMV/GMAX/OBO with CPRI Approved and NABL certified Test Report .

Sumit Anand

Rangrez Electic Works