Supply and Commissioning of Dissolved Ga [Supply and Commissioning of Dissolved Gas Analyzer (DGA) analysis machine as per annexure-1 attached Make:-Hshama Surgical Pvt Ltd or Similar.]

OEMs or their Authorized Agent/dealers with valid authorization from OEM can also quote on behalf of OEM provided the OEM takes full responsibility for the quality of the material including warranty obligations and the inspection against Railway orders carried out at the manufacturer premises.

Time is the essence of contract. As time is the essence of contract, the bidder is to note that the delivery schedule given in the bid document and quote accordingly. Vague delivery period i.e. 2-28 weeks, 3-8 months etc. or a very high delivery period compared to Railways specific delivery period in bid document may be considered commercially unresponsive and offer is liable to be ignored

F i r m must have completed the satisfactory execution of the tendered item in NFR or any other Zonal Railway,Certificate from the C.A must be uploaded

Validity of offer shall not be less than 90 days.

9.6 Commissioning & Proving Test: A. The contractor shall arrange commissioning of the equipment at the consignee premises. The tenderers shall carry out necessary proving test to demonstrate the performance of equipment, after its successful commissioning to the entire satisfaction of the consignee. B. The Contractor or his agents shall commission the machine within stipulated time as shown in the contract. This time frame will be applicable from the date of intimation from the consignee in respect of readiness of the machine for commissioning in cases where the machine is to be installed by the consignee. The time schedule includes the time for installation in cases where installation is also to be undertaken by the contractor. C. The time allowed for commissioning of machine shall be deemed to be the essence of the contract. In case of delay in commissioning of the machine on the part of the contractor, the purchaser shall be entitled to recover and the contractor shall be liable to pay a penalty at the rate of 2% of the price of the M&P for each and every month or part thereof for which commissioning is delayed, provided always that the entire amount of penalty to be paid under the provision of this clause shall not exceed 10% of the total contract value. Failure to install / commission the machine within stipulated time after intimation from the consignee will be taken as breach of contract and purchaser will be at liberty to forfeit the Security Money furnished by the supplier without any prejudice to other rights under the contract. D. Continuance of commissioning work after expiry of stipulated time will also constitute a default for the purpose of the Clause 9.6-C above. The decision of the Purchaser on whether the delay in commissioning has taken place for reason(s) attributed to the contractor shall be final and binding.

Warranty As per clause 9.9 of the NFR INSTRUCTION TO BIDDER Document Attached

Provisions for procurement under Public Procurement (Preference to Make in India) policy as per clause 2.4.2 of %u201CInstructions to Tenderers%u201D for electronic tenders invited on IREPS attached

MSME sources, owned by SC/ST, should upload necessary documents to get the benefits of being owned by SC/ST. Otherwise, claim for benefits may not be entertained

In keeping with the Public Procurement (Preference to Make in India) Order, 2017 as amended and in terms of Clause 2.4.2 of %u201CInstructions to Tenderers%u201D for electronic tenders invited on IREPS attached, Public Procurement of this item is restricted to %u2018Class-I local suppliers%u2019 only. Thus, only %u2018Class-I local supplier%u2019 as defined under the Public Procurement (preference to Make in India) Order, 2017, as amended shall be eligible to bid in this tender. Offers from vendors who do not quality to be %u2018Class-I local supplier%u2019 shall be summarily rejected and, therefore, such vendors should not participate in the tender. In case any vendor who does not qualify to be a %u2018Class-I local supplier%u2019 for the tendered item participates in the tender, such a bidder does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the bidder on this account

Proforma for Tender Specific Authorization may be find from Annexure-5 of %u201CInstructions to Tenderers%u201D for electronic tenders invited on IREPS attached

Please enter the percentage of local content in the material being offered. Please enter ) for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India Policy.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.