Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹14.2 L+₹4,920.60 (0.35%)Rejected-Finance | L-2 | Rejected-Finance L-2 |
Tender Value
₹12.8 L
EMD Value
₹25,680
Closing Date
15 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
PROVISION OF CERTAIN WORKS SERVICES AT AFK9S AT AF STN FARIDABAD
2022_MES_524932_1
GE(FBD)/AF-07/2022-23
Open Tender
Civil Works - Others
Works
180 days
FARIDABAD
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹25,680
24 Aug 2022
19 May 2022
17 Jun 2022
19 May 2022
15 Jun 2022
2 Jun 2022
20 May 2022 - 27 May 2022
60 days
Amount
Material and labour for providing PVDF aluminium composite panels with fire resistent mineral filled core material shall consist of following complete all as specified and directed by Engineer-in-Charge. (I) Aluminium sheet making a total panel thickness of 6 mm with outer surface finished with PVDF based coating 0.25mm ,inner surface finished with a thin coat of polyster paint. The cleness of aluminium cover sheet shall be 0.50 mm inner core shall be of LDPE (II) aluminim framing of section 25 mmx50 mm x1.50mm thick , (III) aluminium grid shall not be exceed 1.0 sqm each the aluminium grid not more than 1 m c/c shall be fixed with MS angle 30x30x5 mm projected 150mm from surface of wall, (IV) Colour shall be approved by GE. (V) Joint shall be sealed with silicon weater proof sealing compound with help of masking Tapes. Note: Canopy,borders, projections etc will be measured in sqm for payment purpose.
M& L for cut outs/ metal sign board of dogs Size 1.2m X 1.5m PVDF aluminium composite panels with fire resistent mineral filled core material printed with vinayl OR print with 3 M retro reflective tapes on ACP Sheet fixed on the ACP Sheet with the help of high bond double side taps Of 3M Grey VHB taps 2 mm thick complete all as specified and directed by Engineer-in-Charge. Note: coloure and Type of dogs choice shall be approved by GE.
M&L for 3d Stainless steel LED lighted letters OR print with 3 M retro reflective tapes on ACP Sheet above 12 inch complete all as specified and directed by Engineer-in-Charge. Note: Size shall be approved by GE.
Excavation in post holes (or similar holes) each n.exc 0.5cum getting out hard/dense soile, returing, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25cm complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete type B2, 1:2:4 (Using 40 mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.
Surface excavation n exc 30 cms deep and averaging 15 cms deep in hard/dense soil and getting out complete all as specified and directed by Engineer-in-Charge.
M&L for hard core of broken stones n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and well rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.
M&L for 100 mm thick Cement concrete type C1, 1:2:4 (using 20 mm graded aggregate) in as in floor etc finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
S/F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge.
S & F Mild steel work in vertical posts and framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting, etc n exc 10 kg each brackets and similar work including bending and welding angles conforming to Fe-410-O or Fe 310-O complete all as specified and directed by Engineer-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI base corrugated steel sheet 0.50mmthick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall ,fixed with self tapping screws as complete all as specified and directed by Engineer-in-Charge.
Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Excavation over areas, n exc 1.5 m deep and getting out in soft and loose soil complete all as specified and directed by Engineer-in-Charge
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as spd.
Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
Providing plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates, 25mm thick, as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes complete all as specified and directed by Engineer-in-Charge.
M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.
raking out joints to stone slab or precast concrete slab floor, any description filling /pointing the joint with cement slurry mixed with pigment to match the surface complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
M/L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces with WPC @ of 3% of weight of cement complete all as specified and as directed by the Engineer-in-Charge.
Supply only Integral waterproofing compound complete all as specified and directed by Engineer-in-Charge.
Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash complete all as specified and directed by Engineer-in-Charge.
M/L Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed by Engineer-in-Charge.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engineer-in-Charge.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engineer-in-Charge.
M & L for Form work fair finished flat surface of concrete to faces of walls, retaining walls,, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. ; vertical or to batter complete all as specified and directed by Engineer-in-Charge
Reinforced Cement Concrete Type M-25 using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L For TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing wwith clips.Fe 500D complete all as specified and directed by Engineer-in-Charge.
S & F Mild steel work in hand rails, wind ties, posts and struts in fencing and gate screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and directed by Engineer-in-Charge.
M&L For Site clearence before work complete all as specified and directed by Engineer-in-Charge
M&L for face mounted mosaic tiles with no mesh on the back surface set and jointed in neat cement slurry and pointed in epoxy grout to match including 10 mm thick rapid seting high performence mortar on brick work or concrete surface complete all as specified and directed by Engineer-in-Charge.
M&L For Plain Cement Concrete TypeB2 1:2:4 (using 20 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
S&FNon - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick screed bed or bedding layer of cement mortar 1:4, for laying floor finish, complete all as specified and directed by Engineer-in-Charge.
M&L fibrillated fiber reinforced heavy duty coloured cement concrete pre polished chequred tiles from Ultra floor tiles or equivalent size 300 x 300 x 20 to 25 mm and wt 4.2kg/tile set jointed and pointed in neat cement slurry in floors, and cut and polished with white cement & pigment complete all as specified and directed by Engineer-in-Charge.
M&L for Kerb stone Ornamental type semi circle on top size 500 x 225 x 100mm thickness from M-30 plain cement concrete and maximum depression from a straight edge held against the finished surfaces shall not exceed 15 mm jointed in cement mortar 1:6 and struck flush complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as specified and directed by Engineer-in-Charge.
Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable complete all as specified and directed by Engineer-in-Charge.
Supply and laying in trenches, LT underground cable of size 4 core 16 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed by Engr-in-cahrge.
Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate and finial including foundation and coping complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for stay and coping for poles including necessary form work to exposed surface finished smooth and even complete all as specified and directed by Engineer-in-Charge.
Supply and fix energy efficient LED flood light new Generation Energy Saving LED flood light powder coated PDC Aluminium body with toughened glass visor long life save exclusive-cast aluminium flood light fitting with high power LEDs 150 Watt as light source including necessary fixing arrarangements complete all as specified and directed by Engineer-in-Charge. Make: Polycab Cat No. PCGLF C5 01 150 or equivalent of Wipro/Philips/Havells.
S&F pole mounted junction box (Street light box) sliding type doors fits to base by 3 phase busbar insulator - 04 Nos including MCB TP 25 Amps for street lighting system with nuts and bolts with fixing arrangment outdoor type of dismension 280 x 170 x 130 mm product code no GSJB-3126 for with suitable screen printed skull and bones for danger notice on middle and top cover of the box complete all as specified and directed by Engineer-in-Charge. Make - Sintex or equivalent model of other make approved by GE
Supply and fixing of terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm Including ,Backlite 4 way connector, MS Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections incl MCB SP 6-32 Amps complete all as specified and directed by Engineer-in-Charge. Make - Sintex
Supply and laying PVC insulated sheathed aluminum conductor cable 10 sqmm two single core 1100 volts grade multistanded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections all as specified and directed by Engr-in-charge.
Supply and fix two single core PVC insulated and sheathed copper conductor cable 2.5 Sqmm nominal size and one single core PVC insulated and sheathed copper conductor cable 1.5 Sqmm nominal size for earth continuity from street light junction box to the street light fittings complete all as specified and directed by Engineer-in-Charge.
S&L GI tubing light grade 32 mm bore intrenches/fixing on pole/wall/crossing in drain etc. for protection of UG cable complete all as specified and directed by Engineer-in-Charge.
M&L for fixing arrangement for 5 Nos flood light on pole by using 40 mm dia GI light grade pipe ring type of length 4 mtr including necessary welding with 40x40x6 mm angle iron and necessaey clamp made by FI 50x6 mm and necessary nut & bolt alongwith washers etc complete all as specified and directed by Engineer-in-Charge.
H.B. Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .