REPAIRS TO ROOF COVERING, FALSE CEILING, JOINERY, PLASTERING, FLOORING, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS IN MILITARY HOSPITAL, GE OFFICE, MDC UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete. all as specified and as directed.

Description all as per item no :01 here in before but bedded in lime or cement mortar

Material and labour for Roof tiles ,Manglore pattern,interlocking at side joints ,laid dry complete. all as specified and as directed.Note:Make of Mangalore pattern tile :Charminar, Raja Tiles, RECHO, Prajapat

Fixing only roof tiles, Mangalore pattern or similar tiles in roofing. Interlocking at side joints laid dry complete all as specified and as directed . Note : Serviceable roof tiles obtained from item No.01 shall be reused under this item .

Material and labour for Ridge or hip tiles to suit Mangalore pattern of roofing tiles ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note:Make of Mangalore pattern tile :Charminar, Raja Tiles, RECHO, Prajapat

Material and labour for IInd class hard wood wooden boarding 20mm thick clean sawn with butt joint with nails in any situation and dismantling of existing un serviceable boarding of any description fixed in any position with nails and taken as credit complete all as specified and as directed .

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed including dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description taken as credit complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting any gauge ,thickness and in any position and taken as credit complete. all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embeded in concrete including taking out embedded portion and making good disturbed ground and serviceable items taken as credit complete. all as specified and as directed.

Dismantling ballies, hard or soft wood, any position, type T-2 including taking out iron straps, bolts and nuts, etc and scrap iron taken as credit complete all as specified and as directed .

Supply and fix Rolled mild Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed .

Supply and fix Rolled mild Steel work in roof truss (framed),trussed,purlins ,crane gantries ,rails and fastening and heavy brackets framing (beams,tee,angle,channel or flat sections) including distance pieces ,cleats confirming to Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed.

Supply and fix 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grid of size 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire and all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works and taken as credit and making good disturbed wall/ ceiling surfaces along with necessary refixing of electrical fittings /extension of fan rods complete all as specified and as directed. Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Providing Decorative False Ceiling 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over and including provision of 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh, fixed in ceiling flat or sloping with anodised aluminium snap grid frame work for flase ceiling size of grid 605 mm x 605 mm including 2mm dia GI hanging wire and all hanging fittings etc and applying two coats of distemper oil emulsion on surface ceiling including dismantling ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed. Note : (i) Make of gypsum anhydrous : EVEREST /ARMSTRONG /Gypsum (India) Ltd (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Providing & fixing false ceiling at all heights with semi perforated 12 mm thick micro tegular edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS false ceiling 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) omprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended ceiling using galvanized mild steel items (galvanizing@ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as directed.. Make: Diamond Ceilings (GRG Flase Ciling GRG Wall Panelling).

Taking down chowkats with shutters of size n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Taking down chowkats with shutters of size exc 1.50 sqm but n,exc 4.0 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Taking down shutters of any description of size n exc 1 sqm each and taken as credit complete all as specified and asdirected.

Taking down shutters of any description of size exc 1 sqm and n exc 2.0 sqm each and taken as credit complete all as specified and asdirected.

Material and labour for 2nd class hard wood chowkhat or frame, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position complete all as specified and as directed.

Material and labour for Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkatscomplete all as specified and as directed.

Material and labour for Factory made 35 mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkatscomplete all as specified and as directed .

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed .

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawingcomplete all as specified and as directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles)consisting of frame made out of M.S.tubes for top & bottom rails.M.S. frame shall be covered wire heat strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,for fully gauzed,panel will be of wire gauze in lieu of single side prelam pvc sheet panel,the wire gauze shall be wrapped on an additional square 8mm M.S.tubes.the wire gauze shall be stretched to tighten firmly with beading, and joined together with solvent cement, and fixed in the frame at site all as per specification & drawing complete all as specified and directed.

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including provision of 4mm sheet glass ordinary quality and stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm for panels including provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note:(i) Each window shall be provided with 2 glazed shutters + 1 wire mesh shutter. (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iv ) Make of Stainless steel wire mesh : (v) Make of Glass : Saint gobain/modi Guard/Gold fish

M&L aluminium anodised doors standard jindal or equivalent section size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet frosted glass in top pannel and 4mm thick aluminium composit pannel board including fitting with hydralic door closer,handle,mortise lock heavy duty and hydralic floor spring heavy duty etc complete all as specified and directed.

Supply and fix in repairs Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed. Note :(i) Make of Aluminium anodised section : Jindal/Hindalco/Indal (ii) Minimum thickness of anodisation shall be of 15 Microns

Supply and fix in repairs Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.Note :Make of Aluminium door closer :Everite/Hardwyn(ISI MARKED)

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed including necesaary removal and refixing of existing aluminium door complete all as specified and as directed.Note :Make ::Everite/Hardwyn(ISI MARKED)

Supply and fix MS butt hinges cold rolled medium weight 100mm size fixed with MS screws complete all as specified and as directed.(ISI MARKED)

Supply and fix Stainless steel butt hinges 100mm size fixed with SS screws complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs 300mm long Mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats all as specified and as directed. (ISI MARKED)

Description all as specified in item no :36 here in before but fixed in repairs

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. Make : Crown/Classic/Adarsh

Description all as specified in item no :38 here in before but fixed in repairs

Supply and fix in repairs 150 mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Description all as specified in item no :41 here in before but fixed in repairs

Supply and fix in repairs 125mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed . Make : Crown/Classic/Adarsh

Description all as specified in item no :43 here in before but fixed in repairs

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.(ISI Marked)

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.(ISI Marked)

Supply and fix in repairs Harrison rail , mild steel,chromium plated curtain rod, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.

Hacking out old broken glass (any thickness,size , quality or description) from wooden frames ,glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed

Supply and fix 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square of size not exc 0.50 Sqm each pane. complete all as specified and as directed . Make of Glass : Saint gobain/Modi Guard/Gold fish

Description all as specified in item no :49 here in before but of size exc 0.50 Sqm each pane

Supply and fix 4mm thick figured glass,pin head type and glazing with oil putty in square of size not exc 0.50 Sqm each pane. complete all as specified and as directed . Make of Glass : Saint gobain/Modi Guard/Gold fish

Description all as specified in item no :51 here in before but of size exc 0.50 Sqm each pane

Supply and fix in repairs for 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairscomplete all as specified and as directed.Note : Make of Particle board : Anchor/KitPly/Century

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of old unserviceable precast concrete masonry of any description and taken as credit complete all as specified and as directed

Material and labour for PCC 1:3:6,type C-1 ,using 20 mm graded stone aggregate as in coping ,bed blocks, eaves filling between wall and tile/sheet roofing ,as in chowkhat and similar work including necessary steel form work complete all as specified and as directed..

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed..

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cementcomplete all as specified and as directed..

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for Preparing newly plastered surfaces of wall , cornices, pillasters, etc. and applying two coats of oil bound distember(Acrylic distember washable) ovea a coat of Chalk whiting primer complete all as specified and as directed.

Material and labour for Two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over newly plastered surface complete all as specified and as directed.

Material and labour for Preparing old plastered surfaces of wall , cornices, pillasters, etc by washing, rubbing down and stopping etc and applying one coat of oil bound distember(Acrylic distember washable) complete all as specified and as directed.

Material and labour for Preparation of new surfaces of steel of any description n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink oxide primer.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base of flooring including necessary steel form work complete all as specified and as directed.

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqmbut not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality coloured ceramic tiles, edge cut, 8 to 9mm thick, area of each tile exc 0.18 Sqm but not exc 0.36 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality glazed ceramic tiles coloured of size 450x300x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Dismantling of stone slab or tiles , paver blocks of any description and any thickness in floors, aprons etc., laid bedded and pointed in any mortar and taken as credit complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris not exceeding 100 meters complete all as specified and as directed .

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 (type B-1) using 20 mm graded stone aggregate , 100 mm thick as in floor including necessary steel form work complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking coloured paver block of 55 to 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade complete all as specified and as directed.

Material and labour for River Sand filling under floors or in foundations including spreading ,levelling , watering and consolidation complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels and filling joints with mortar, etc.including necessary steel form work complete all as specified and as directed.

Supplying and laying 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed. Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Supply and fix in repairs 15mm bore bib tap, brass CP, fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Note : Make : Prayag/GEM/ESS ESS

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipecomplete all as specified and as directed. Make: JAQUAR/ JOHNSON/ CERA

Supply and fix in repairs 15mm bore dia PTMT bib tap, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe complete all as specified and as directed. Note:Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. Make: JAQUAR/ JOHNSON/ CERA

Supply and fix in repairs 15mm bore dia Stop valve, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Note : Make : Metro/GEM/ESS ESS

Supply and fix in repairs 15mm bore pillar taps brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for iron pipe for unions complete all as specified and as directed Note : Make : Prayag/GEM/ESS ESS

Supply and fix in repairs Brass Chromium finish Hospital Elbow/Wrist Operated Long Handle Action Bib Tap/Faucet/Cock complete all as specified and directed. Note : Make : Prayag/GEM/ESS ESS

Supply and fix in repair Vitreous china oval type wash basin, white, size 550x400mm, with waste pipe and waste fittings including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest including 'P' or 'S' trap and provision of lime concreting and connection to trap and to flushing pipe,anti syphonage pipe complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe including provision of PVC flush pipe complete all as specified and as directed.

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed.

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420 mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Blue Star/Commander

Supply and fix in repairs PVC flexible pipe (waste pipe) ,suitable for 32 mm bore dia waste coupling of sink/wash hand basin complete all as specified and as directed .

Supply and fix in repairs Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipe of WHB /Sink complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated towel rail 600mm long with and including Chromium plated brass screws and wooden/ plastic cleats.complete all as specified and as directed.

Supply and fix in repairs brass chromium plated perforated shower rose swivel type 125mm size suitable for fixing with 15mm bore pipe including 300mm long brass CP shower arm complete all as specified and as directed

Supply and fix Stainless steel gratings with frame, dome type, 125 mm dia, with or without hole for waste pipe connection complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs Stainless steel gratings with frame, dome type, 125 mm dia, with or without hole for waste pipe connection complete all as specified and as directed.(ISI MARKED)

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises.complete all as specified and as directed

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix 32mm bore x 900mm long LDPE pipes of pressure rating 6 kg/ Sqcm fixed to wash basin/ urinal complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 75mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) vent cowl complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix PVC (SWR) floor trap plain , 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

Supply and fix Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing mentioned in SECTION -8 of SSR Part II 2020 complete all as specified and as directed .

Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawingmentioned in SECTION -8 of SSR Part II 2020 complete all as specified and as directed .

Dismantling fencing wire mesh,any type and any position and taken as credit complete all as specified and as directed .

Dismantling posts or struts (wood, steel or R.C.C.) any section,embeded in concrete including taking out embedded portion and making good disturbed ground to match with the existing surface and taken as credit complete all as specified and as directed .

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed .Note :Make :TATA/SAIL/RINL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed

Supply and fix rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts incl cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A. complete all as specified and as directed

Supply and fix Mild steel deformed round bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia confirmimg to Fe-410-W(Gde.E-250) complete all as specified and as directed

Supply and fix MS screw bolts (machine made) with hexagonal or square head at one end and screwed to other or screwed both ends n exc 5 cm long and 5 to 10mm dia shank bolt complete all as specified and as directed

Supply and fix Mild steel flats for screwing chain link fencing including securing bolts & similar work conforming to Fe -290 Gde E-165 complete all as specified and as directed

Note: Schedule shall be executed in high rise buildings of more than 02 floors and upto 03 floors. The contractor shall arrange necessary scaffolding/shoring and other safety measures to be undertaken including necessary insurance for the workers engaged by him during the execution of work.

A. N. Kalbhavi

AARADHYA ENTERPRISES

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS

SHREESAMARTH CONSTRUCTION

SAVAN ENTERPRISES

M/s. N D KALING

ASHOK M RAJGOLKAR