Fabrication of C.G.I Shed of size (47 feet x 30feet) over the existing machines installed inside crate weaving workshop Belicharana.

Amount

Fabrication of C.G.I Shed of size (47’x 30’) over the existing machines installed inside crate weaving workshop Belicharana. The job includes creation of structure by fabrication at site and placing of C.G.I Sheets on the rooftop only, extending on all sides to prevent falling of rain while executing the work of fabrication of the crate/boxes on the machines.

Fabrication & Erection of C.G.I Shed of size 47’x 30’ over the existing machines after dismantling the old damaged C.G.I Shed installed over D.G Set. Job includes laying the foundation blocks 10 Nos. in total of size (2’x2’x3’) at two opposite sides of the shed and disposing of excavated material at a proper place. Fabrication of iron mesh of 6” x 6” inch interspacing from TMT Bar of 10 mm dia. and placing them inside the pits of foundation blocks. Filling the 10 Nos. foundation block with concrete cement mixture of ratio(1:3:6) after placing the respectivehollow square section column pipe of size (4”x4”) with min. thickness of 4 mm and total height of 14’(12’ above ground level and 2’ in the cement in each block) after welding the locking clamps at the bottom of the vertical square column pipe. Hence erection of 10 Nos. column structure by proper laying of foundation blocks. Proper curing of foundation blocks so that the cement concrete mixture attains its maximum strength. Now welding of (10”x10”) gusset plate having min. thickness of 10 mm at top of each column for placing of trusses. Job also includes fabrication and fitting of 05 Nos. trusses, made out of hollow square section pipe of size (2”x2”) with min. thickness 2.6 mm to be placed at top of oppositely installed column structures. The length of each truss should be 30’ with proper provision for extending of C.G.I sheet on each side. Placing of fabricated trusses structure on gusset plates and welding of the same. Providing and Fitting of 08 Nos. purlins of approximate length 49’ each made out of hollow square section pipe of size (2”x2”) with minimum thickness 2.6 mm on top of trusses to support the C.G.I sheets. Providing and Fitting of 0.5mm thick C.G.I Sheet over total approximate roof area of 152 m2 at top of the already erected column structure to cover the roof of entire shed and fastening the same with good quality fastening material. The C.G.I sheets must extend on all sides to prevent falling of rain while executing the work of fabrication of crates/boxes on the machines. Job also includes painting of shed structure with coat of primer red oxide after removing the rust and then with two coats of enamel paint for protection of the structure from the rust etc. Job also includes cost of labour for shifting of already manufactured crates lying at places where the foundation blocks have to be made. Job includes cost of labour/material / transportation charges/cost of cutting of tree branches/bush cutting, cost of welding electrodes/hire charges of tools and tackles and all taxes as applicable. C/Job

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS

M/S UK MECH AND ELECT ENGG WORKS

SMART TECH AND CO

AADISHWAR ELECTRICAL AND MECHANICAL WORKS