Construction of 100 Seated Girls Hostel of Kasturaba Gandhi Balika Vidyalaya (KGBV) at Reamal in the district of Deogarh for the year 2025-26.

Earthwork in excavation of foundation trenches and column foundation trenches and column foundation and pits in all kinds of soil within an initial lift of 1.5m. Including dressing the sides and leveling the bed and depositing the excavated materials away from the site within an initial lead of 50m including cost of all labour, sundries, tools and plants etc complete as per direction of the Engineer-in-charge as per approved specification.

Ground Floor

Filling foundation trenches and plinth with sand, well watered and compacted with appropriate mechanical compactor, top surface dressed and leveled to proper gradient including cost of all materials, labour, sundries, T&P ,all taxes, royalties, loading and unloading etc complete as per direction of the Engineer-in-charge as per approved specification.

Ground Floor

Providing filling foundation and plinth with sandy soil well watered and rammed within 5 km initial lead including rough dressing and levelling the bed including cost of all materials, labour, sundries, T&P ,all taxes, royalties, loading and unloading etc complete as per direction of the Engineer-in-charge as per approved specification.

Ground Floor

Providing and laying plain cement concrete 1:3:6 Nominal grade mix using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 40 mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification,

Ground Floor

Providing and laying plain cement concrete 1:2:4 Nominal grade mix using portland slag cement in foundation and bottom layers of flooring and below pile cap etc. using 12mm size downgraded hard crusher broken granite aggregate of approved quality from approved quarry including weigh-batching. Mixing in appropriate mechanical mixers, lowering, laying and compacting to proper level including curing and cost of all materials with all taxes and royalties loading and unloading conveyance, labour, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Ground Floor

Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:4) in Superstructure including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Ground Floor

Brick work with Flyash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

Foundation & Plinth

Ground Floor

Superstructure

Ground Floor

First Floor

Providing, lifting, hoisting and laying RCC of M25 grade design mix using portland slag cement as per IS:455 as per the drawing with 20mm aggregate (downgraded conforming to IS: 383) of hard crusher broken granite aggregate of approved quality from approved quarry including weigh batching, mixing in approved mechanical concrete mixers and compacting to proper shape and size level and plumbs and finishing the exposed surface smooth, scaffolding watering and curing for the required period as per direction of the Engineer-in-charge including cost of all materials with taxes royalities, transportation, loading and unloading, all labour sundries T&P etc. including cost of material and labour and centering, shuttering etc complete including providing strong rigid and levelled Steel centering and shuttering to required shape and size for all kinds of RCC works mentioned in different items with approved centering and shuttering materials with all necessary bracing ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets electrical conduct pipe, PH pipes fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing after the required time from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc complete as per direction of the Engineer-in-charge as per approved specification For finished item of the works excluding reinforcement..

Ground Floor

Foundation

Columns Upto Roof Level

Lintel

RCC Plinth Beam

RCC Roof Beam

RCC Roof Slab

RCC Stair Case

RCC Chajja and Canopy

First Floor

Columns Upto Mumty Level

Lintel

RCC Chajja

Supplying reinforcement of required diameter and approved quality for the RCC items with reinforcement for concrete work shall be Fe 500 conforming to IS 1786 and strictly to the latest Indian Standards including straightening, cutting to sizes, bending and binding the grills, lifting and placing in position as per design complete including cost of bars, binding wires for binding reinforcement which shall be soft & of annealed mild steel of 16 SWG and shall conform to IS 280: all labour, sundries, T&P and scaffolding (linear measurement of reinforcement only will be taken and quantity will be calculated on standard weight) for all heights etc complete as per direction of the Engineer-in-charge as per approved specification

A)Ground Floor

B) First Floor

Providing 12mm thick cement plaster with cement mortar (1:6) using portland slag cement (IS 455) to outside surface of brick masonry walls including raking out joints to a depth of 12mm, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance loading and unloading, all taxes and royalties, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

16mm thick cement plaster on the rough side of brick masonry wall with cement mortar of mix (1:6) using portland slag cement (IS 455) with including raking out joints upto a depth of 12mm, scraping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in-charge including cost of all materials, conveyance, loading and unloading, all taxes and royalities, all labour for scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

Providing 20mm thick Grading plaster with cement mortar of mix (1:4) with portland slag cement (IS 455) over roof slab including cost of all materials, conveyance, taxes and royalties, scaffolding, watering and curing, sundries and T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A) Ground Floor

B) First Floor

2.5cm thick A.S flooring with C.C (1:2:4) using 12 mm chips lowering and laying concrete with punning etc complete.

A) Ground Floor

Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying distemper including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

Finishing walls with Water proofing Cement Paint of approved shed to Exterior walls including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

Distempering two coats to inside walls with approved make distemper of approved shed on new work to give an even shed including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

Supplying, Fitting &Fixing Up Window Sliding Type madeup from Aluminium Section 151-154,151-155 as windows frame section no-151-155,151-153,151-167 as Shutter Frame fitted with 5mm thick Black Glass as penal fitted as per specifications.

A)Ground Floor

B) First Floor

Supplying, fitting and fixing approved of doors shutters of M.S door including cost of materials etc. and as per the direction of the Engineer-in-charge.

A)Ground Floor

B) First Floor

Supplying, fitting and fixing of M.S. grill with cost, conveyance of all materials, labour, T&P etc. required for the complete in all respect.

A)Ground Floor

B) First Floor

Painting two coats with approved paint on new Iron work over coat of primer etc. Enalmel paint including cost of all materials with taxes, all labour, scaffoldings, sundries T&P etc complete as per direction of the Engineer-in-charge as per approved specification.

A)Ground Floor

B) First Floor

Labour for fitting fixing of big size or traffered A.C sheet in roofing including fixing of ridges windes etc.Complet but excluding cost of fittings including drilling holes in wind tiles per1 sqm.

A)First Floor

Supplying ,fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless squre pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification buffing,polishing etc. with cost, conveyence, taxes of all materials, labour, T&P etc. required for the complete as per direction of Engineer- in- charge.

A)Ground Floor

Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2)

-do- (Gr.B) (1.1.2-1.24.2)

-do- (Gr.C) (1.1.3-1.24.2)

S/F of M.S. Box for 2 Module 18 swg

S/F of M.S. Box for 4 Module 18 swg

S/F of M.S. Box for 6 Module 18 swg

S/F of M.S. Box for 8 Module 18 swg

S/F of M.S. Box for12 Module 18 swg

S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 4x10sqmm + 2 x 4 sqmm (1.8.11)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F OF 63A 4POLE MCB C-TYPE (Make:L&T/Equivalent

S/F of 4way( 4+12) TPN MCB DB Double door (2.5.5)

S/F of MCB 8 Way Double Door (2.3.1)

Provn. of 3 1/2 x 35 sqmm Armoured Cable with all connections(25)

Laying of MV cable above 25sqmm to 120 sqmm in ground(5.1.2)

S/M of end termination of 31/2 X 35 (5.8.21)

S/F of 63A Wall Mounted Pannel board (36"x33"x10") .1). 63a 4P 25KA MCCB-01NO. Icu-100% Ics (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with spreader, rotary handle and UV relaease 2)63a Manual change over -01(Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) with Aux Contact Kit, Operating handle kit and out put shorting link. Spreader Link-01 No. 3) 63a 4P AC 10K C-Curve MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 4) 40A C-Curve DP DP MCB-03 (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 5) SPD type 1+2,50ka 3P+N-01NO. (Make-ABB/SIEMENS/SHNEIDER/LEGRAND/L&T ) 6) INSTRUMENT- (i) 3 numbers phase indicating lamp with toggle switch and HRC Fuse-2 SET. 7) (i) 02 SET of digital type multification meter with CT for voltage ,current, Freqency, PF,,THD Indication with RS 485 COMPACTIVITY for bms data. 100A Ext. 8) 100A/5 CTS-6 9) 100A BUSBAR-4.1KG with all materials.

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2+3.3)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Fan hook S, Type on ceiling.

S/F of step type modular fan regulator

S/F of 12 Watt. LED bulb.

S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)

S/F of 18 Watt Ceiling Light Recessed Mount or Surface Mount(Round or Square )Type(Make Havells/Crompton/Polycab or Equivalent)

S/F OF 2000VA/24v Invertor with 2no 180Ah Battery including Trally arrangement. (Luminous/Microtek/Excide)

Supply & Fixing of 45-48Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.Ground Floor 25mm dia C-PVC pipe (Ashirbad/Supreme)

In 1st Floor-32mm dia C-PVC pipe (Ashirbad/Supreme)

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP Short Body Bib cock (Jaquar make)

15mm dia CP angle stop cock (Jaquar make)

15mm dia CP Concealed stop cock (Jaquar make)

15mm dia CP two in one bib cock (Jaquar make)

15mm dia CP Health faucet (Jaquar make)

15mm dia CP extension piece

15mm dia CP Pillar cock (Jaquar make)

25mm dia G.M or Brass F.W valve (Sakti make)

125mm dia CP gratings

Wall Mounted Grab Bar 600 mm long

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres PVC L.L. Cistern (Slimline-white)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.75mm dia U-PVC SWR pipes(Supreme/Ashirvad)

75mm U-PVC plain bend

75mm U-PVC Door bend

110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door bend

110mm U-PVC door Tee

110mm U-PVC D/J with Door

110mm dia U-PVC offset without ear

110mm U-PVC plain bend

110mm U-PVC vent cowl

75mm U-PVC vent cowl

110mm dia U-PVC 'P' trap

110mm dia U-PVC socket plain

75mm dia U-PVC socket plain

PVC Clamp

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make).580mm size Orissa pan(Hindware/Parryware/Neycer)

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.EWC with Seat Cover (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge.550mm x 400mm size W. H. Basin (Parryware/Hindware/Neycer)

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x250 mm stainless steel kitchen sink (Mousumi make)

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge.600mm x 450mm size B.E mirror

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.450mm x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.20mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)

CP towel Ring (Plaza/Amber/Aquatic)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder (Plaza/Amber/Aquatic)

Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.

Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge

Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete

Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully Trap chamber (0.25x0.25 inside size)

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mm x 760mm x 460mm

Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.CConstruction of Manhole Chamber (910mmx910mmx910mm)

EXTERNAL PH WORK

Sinking of 200mmx150mm dia Bore Well through DTH method.- 1No.

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only. Drilling of 200mm dia bore 0 to 30.00mtr

Drilling of 150mm dia bore 30.00 to 100.00 mtr and above

Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials.Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

Cost of 200mm dia PVC schedule - 80 pipe

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.1HP Three Phase 5 stage submersible pump set.

DOL control panel

M. S. Clamp, Bend, Socket ,SS nipple etc.

2.50mm Sqm Submersible flat cable

Steel rope with cover

50mm dia HDPE pipe

Labour charges for lowering, testing, commissioning & transportation to site etc.

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge .1.20m dia x 2.00m deep soakway pit

1.0m dia x 2.00m deep soakway pit

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of capacity 2000 litre conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Construction 1No 30 users Septic tank

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.50m

- do - with addl. Depth of 1.5 m

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.in ground Floor-

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C.in ground floor

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In ground Floor

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C

Please Enable Macros to View BoQ information