Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6,900
Closing Date
17 Oct 2026, 2:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CE/TTPS
Chief Engineer, Tuticorin Thermal Power Station, Tuticorin 628004.
TTPS MechII TM I UnitIII Conducting tube Cleaning in the inner surface of the condenser for its entire 10 02m length using a flexible hose fitted with nylon brush and fine water tube jet arrangement subsequent jet cleaning and Inspection of
2026_EB_710128_1
CE/TTPS/SE/M-II/No.118/2026-27
Open Tender
Miscellaneous Works
Item Rate
15 days
TTPS
As per BQR conditions in NIT
8 documents required · 8 mandatory
₹0
₹6,900
Yes
1 Oct 2026
1 Oct 2026
21 Oct 2026
1 Oct 2026
17 Oct 2026
1 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Condenser Brush and Jet Cleaning
Opening of the condenser man hole doors, removal of the visible sea growths such as shells and algae from the tube sheet, tube mouth and water box, provision of scaffolding arrangement necessary for cleaning both East &West condensers, cleaning the condensers tube inner surface one by one by inserting the flexible hose provided with a nylon brush and fine water jet arrangement, cleaning the debris from the condenser water box, removal of the scaffolding and closing the man hole doors. | 15,550 | Tubes | 55 | ₹8,55,250 |
| 2 | Condenser tube water jet cleaning | 15,550 | Tubes | 55 | ₹8,55,250 |
| 3 | Inspection and Overhauling of 210MW LMW Turbine Governing Elements
Dismantling front pedestal cover, overhauling of main oil pump, intermediate pilot valve, Speed load control assembly, Differentiator, EGPV, turbine trip switch, CVSM feed pack pilot Control pilot & over speed striker. Dismantling of front bearing pedestal top cover, disconnecting the oil pipe lines, dismantling the gear coupling inspection & rectification dismantling of main oil pump, rotor float checking, side and top oil clearance checking. Inspection of impeller, wear ring clearance checking inspection of bearings and doing correction works, replacement of bearings, gear coupling if required. MOP & HP rotor alignment checking and correcting the same and assembling the gear coupling and MOP cover. Dismantling the MOP NRV, lapping and blue matching and assembling, Dismantling, cleaning, inspection and assembling of follow pilot, summation pilot, load/speed control pilot, speeder gear assembly, EGPV, intermediate pilot, differentiator, CVSM feedback pilot etc., Speed governor sleeve to nozzle, EGPV lever to over speed striker to rubber. | 1 | No | 55 | ₹55 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_853256.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .