Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹42.2 LAWARDED | AWARDED |
Tender Value
₹40.3 L
EMD Value
₹81,000
Closing Date
13 Jun 2025, 10:30 pmClosed
Public Works Department
Raising Of Compound Wall, Repair of Stage & Constrution of Toilet block For both Gents & Ladies in Valmiki Ground in Gokak Town of Gokak Taluka in Belgavi District HOA 4059 Dept Buildings
PWD/2025-26/BD/WORK_INDENT21654
PWD/2025-26/BD/WORK_INDENT21654
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Chikkodi
₹1,010
₹81,000
29 May 2025
29 May 2025
16 Jun 2025
11 Jun 2025
Raising Of Compound Wall, Repair of Stage & Constrution of Toilet block For both Gents & Ladies in Valmiki Ground in Gokak Town of Gokak Taluka in Belgavi District
Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Elbows
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 32 mm dia PVC Elbows
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 32 mm dia PVC Tee
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Tee
Supply of PPR Ball Valve Plastic (Heavy Body) confirming to IS 15801- 2008 and DIN Standards 8077/8092 - PPR Ball Valve Plastic (Heavy Body) 25mm
Supply of PPR Ball Valve Plastic (Heavy Body) confirming to IS 15801- 2008 and DIN Standards 8077/8092 - PPR Ball Valve Plastic (Heavy Body) 32mm
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing PTMT bib cock of approved quality and colour - 15 mm nominal bore, 90 mm long, weighing not less than 93 g
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing & fixing Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick Glass panes including cost of materials, labour, usa...
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...
Formwark for Beams, Lintels of Building @60%
Formwark for Roof Slab @50%
ELECTRICAL ESTIMATE
Supplying and fixing of PVC casing and capping on the wall or
ceiling using necessary materials like bends, junction box,
elbows, screws at an interval of 300 mm . etc. as required.
Supplying and flush mounting teak wooden box without front
plank, made of not less than 12 mm thick wood, after due
groove cutting, finishing with necessary cement plastering
I. Point wiring using Copper wire with switch.
"Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi s...
c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of
wiring with specified IS...
Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box
should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with
required nos. of machine screws, bolts nuts etc., complete on
the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Using Group "A" materials
16Amps one way switch
32Amps DP switch
6/16Amps universal socket
6Amps 3way socket.
Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70PERCENT lumen maintenance with CRI LESS 80. Power Input: 220-240V AT 50/60Hz &...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and
Supplying and fixing regular MCB distribution boards on
wall/ood board / flush mounting using required clA, bolts,
nuts etc., with provision for fixing suitable type capacity
MCB's single phase/3 phas...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Digging of Pit for providing GI Pipe type Earthing LABOUR RATE HESCOM SR
Supply and fixing polished wood board made of not less
than 15mm thick plank on both sides of not more than 2
pieces and fixing the same to the wall using tapered inverted
wooden plugs screws.
12 INCHx12 INCH2 INCH
Fixing all types and all capacities of fluorescent /false ceiling /
spot light / CFL / LED fittings indoor on the wall/ ceiling /
rafters / girders using 23/0.0076"" twin twisted PVC insulated
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .