Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.0 LAccepted-AOC 183 MG ROAD JUNGLIGHAT PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN NICOBAR ISLANDS | 744103 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹36.1 L+₹2.1 L (6.10%)Rejected-Finance | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹39.4 L+₹5.4 L (16.0%)Rejected-Finance GOALAPARA MONIRAMPUR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 WB | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹40.6 L+₹6.6 L (19.5%)Rejected-Finance VILL KONGORERAIMA PO KONGORERAIMA PS ANANDAPUR BLOCK KESHPUR DIST PASCHIM MEDINIPUR PIN 721122 WB | MEDINIPUR WEST | WEST BENGAL | 721122 | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹40.8 L+₹6.8 L (20.0%)Rejected-Finance | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
9 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
PROVN OF CONCRETE SLAB ON DRAINS ADDN ALTN OF COMPLETE DRAINAGE SYSTEM CONSTRUCTION OF SECURITY WALL AND ADDN ALTN OF ROOF TOP SHEETS AT KANKINARA UNDER GE NORTH KOLKATA
2023_MES_609734_1
8271/23-24/GE(N)/KOL/E8 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
KANKINARA
AS PER TENDERDOCUMENT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹66,000
Yes
5 Sept 2023
19 Jul 2023
10 Aug 2023
20 Jul 2023
9 Aug 2023
2 Aug 2023
Amount
Excavation in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation etc and getting out in soft / loose soil for taking out pipe line complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for precast reinforced cement concrete (1:1.5:3) type A-1 (using 20mm graded stone aggregates) for cover slab set in CM (1:4) as in manhole cover/ drain cover including demolition of existing unserviceable RCC cover slab with MS handle complete all as specified and directed.
Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.
All as per Item No. 7 above but 5mm dia and over upto and including 10mm dia TMT bars in stirrups, spacers and binders complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on new steel surface exceeding 10 cm width or girth over a coat of red oxide primer including preparation of new steel surface complete all as specified and directed.
S&F mild steel plates, plain or chequered 5mm thick or over in thickness in available sizes conforming to Fe-290 (Gde E- 165) complete all as specified and directed.
S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: Each line wire shall be measured separately.
S&F structural steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and dia of neck 12 to 20 mm complete all as specified and directed.
S&F concertina coil (reinforced punched barbed tape single layer) for fencing work complete all as per following specification and as directed. (i) Diameter of concertina coil : 1050mm, (ii) No of turns in concertina : 50 to 53 turns. (iii) weight of each coil : 15 kg (approx). (iv) Coverage per coil : 6 RM, (v) Central core wire : Made from high tensile spring steel core wire conforming to IS-4454 hot dipped galvanized (conforming to IS-2629) with dia 2.59mm (+/- 5%), UTS 145-160 kg/sqmm, zinc coating 250-300 gms/ sqm (vi) Strips : Electro galvanized steel strip 0.5mm (+/- 0.02mm) thick conforming to IS-1573, Zinc coating - 120 gm/sqm and bitumen dipped, width of barbs 11mm (+/- 5%), pitch of barbs 24mm (+/- 0.5mm), (vii) Clips : IS 304 - 1.5mm thick C and U clips 'C' special type for fixing coil and RBT wire jointing. (viii) No of clips 125 for each coil, (ix) handle and spikes to be provided complete all as specified and directed.
M&L for reinforced cement concrete (1:1.5:3) Type A-1 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note: Reinforcement and Formwork shall be measured and paid separately.
M&L for reinforced cement concrete (1:1.5:3) Type A-1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note: Reinforcement and Formwork shall be measured and paid separately.
M&L for reinforced cement concrete (1:1.5:3) Type A-1 (using 20mm graded stone aggregates) as in columns, pillars, piers,posts and struts etc complete all as specified and directed. Note: Reinforcement and Formwork shall be measured and paid separately.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, lintle cantilever, shelves etc. for rough flat concrete surface complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scaffoldings complete all as specified and directed and as per manufacturers instructions.
M & L for 20mm thick rendering in cement mortar 1:4 in two layers, 10mm thick in each layer and mixed with water proofing liquid admixture on top layer of external surfaces of brickwork or concrete surfaces including finishing the surfaces fair and even compelete all as specified and directed. (Note : Water proofing liquid admixture shall be measured and paid separately)
Supply only water proofing liquid admixture complete all as specified and directed.
SANDIP CONSTRUCTION
JADAV CONSTRUCTION
S M ENTERPRISE
M/S Manna Construction
KOLAY CONSTRUCTION
ALOKE ENGINEERING AND COMPANY
SHIVAM ENTERPRISE
B N ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .