PROVN OF TRAINING SHED AT AF STN SONEGAON

Amount

Excavating over areas, n exc1.5 m deep and getting out soft/loose soil (Black cotton soil) complete all as specified and directed

Excavating over areas, exc1.5 m deep and getting out soft/loose soil (Black cotton soil) complete all as specified and directed

Removing excavated material to a distance exc. 50m but n exc. 100m and depositing where directed at a level n exc. 1.5 m above the starting point and depositing where complete all as specified and directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering to a true surface etc complete all as specified and directed.

M&L for hardcore of broken stone gauge not exceeding 63mm,deposited, spread and leveled in layer not exceeding 30cm thick, watered and rammed to true surface complete all as specified and directed.

M&L 150mm thick cement concrete type C-2,1:3:6 (40mm graded aggregate) as in sub base with proper slope to maintain to self drainage etc complete all as specified and directed.

M&L 160mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) for flooring with proper slope to maintain to self drainage etc complete all as specified and directed.

S&F MS Rolled sections as in main and cross beams & columns rafters; purlins; fixed with angle cleats or other connecting plates Fe- 410 W(Gde E-250 Quality A) incl framed roof truses complete all as specified and directed.

S &F mild steel screw bolt,11 to 15mm dia machine made with hexagonal head at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut exc 05cm and n exc10cm long complete all as specified and directed.

S &F 12 mm dia Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc30cm long complete all as specified and directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 12 mm dia bolt with 2 number washer instead of self tapping screws in walls etc. with grade of zinc coating 120 gm per Sqm (both side) etc.complete all as specified and directed. (Note : bolt and washer shall be measured and paid separately) (Make : JINDAL, TATA)

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering, fixed with 12 mm dia bolt with 2 number washer instead of self tapping screws complete all as specified and directed (Note : bolt and washer shall be measured and paid separately) (Make : JINDAL, TATA)

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with 12 mm dia bolt with 2 number washer instead of self tapping screws complete all as specified and directed (Note : bolt and washer shall be measured and paid separately) (Make : JINDAL, TATA)

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with 12 mm dia bolt with 2 number washer instead of self tapping screws in roof, wall etc complete all as specified and directed .(Note : bolt and washer shall be measured and paid separately)

M&L for preparing the newly steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed upto any height and in any shade and colour complete all as specified and directed.

M &L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and directed.

S&F Mild steel sliding door bolts 300 mm long, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F mild steel medium weight cold rolled butt hinge 100mm size complete all as specified and directed.

S & F Mild steel pressed handles of 150mm size, , oval type, stove enamelled black etc complete all as specified and directed.

M &L for Plain cement concrete type D-2 1:4:8 (40mm graded aggregate) and mass concrete in foundation filling etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC M-25 design mix (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix (20 mm graded aggregate) in Columns, pillars, piers, posts and struts for rough finished surfaces of concrete etc complete all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to IS (Fe 415 D) complete all as specified and directed.

. - Ditto- same as here-in - above item No-25 but 5mm dia and over up to and including 10mm dia in stirrups complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

. Ditto- same as here-in - above item No-27 but without glazing bars etc complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified and directed.

S &F 3mm thick sheet glass ordinary quality & fixing with Oil putty each pane n.exc 0.5 sqmt complete all as specified and directed.

S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required etc.complete all as specified and directed.

M &L for PVC casing capping surface type point wiring with 1.5 Sqmm nominal area copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i including 600 volts grade 1.5 sqmm copper stranded single core cable green color PVC insulated for continuous earthing wire complete with PVC casing capping strips with all fittings/ fixtures i.e elbow,bends,couplers,tee,switch including mounting box, top covered with white hylam sheet,fixing screws mounting fitting/junction boxes etc and makig good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed. For the following:-

(a) One light point controlled by one switch

S&F switch piano, flush type single pole one way ,5 Amps, 240 Volts Ac complete all as specified and directed.

S&F ceiling rose surface backlight, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.

Supply and fix LED tube light fitting 1x 20 watt fixed on wall/surface / ceiling with all accessories holder driver including LED tube light of 20 watt with surge protector complete rewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable of suitable size complete all as specified and directed.

S & F 20 Watt LED Bldg security light with a nominal system l The luminaries shall have rated system lifetime of 50,000 burning hours at L70. The luminaries should have cool white colour temperature (CCT>5000K) and a CRI>70. The luminaire shall meet IP66 rating with THD<20% & pf>0.9. The luminaire housing should be made of high pressure die cast aluminimum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management. The total power consumption should not exceed 25W (including driver) pre wired fitted on and including two Nos PVC block of suitable size and connection up to tube light fitting with copper 3 core flexible cord of minimum size 0.5 Sqmm size of suitable length and testing complete including LED lamp of 20 watt complete all as specified and as directed. Make : CG CAT No.LST-20-CDL-M or equivalent in , Wipro, Bajaj, Philips

S&F sheet metal enclosure for MCB DB SPN 4 way 240 Volts with 200 Amps rated Bus bar semi concealed type with necessary connection complete all as specified and directed. Make -: Havells Cat Part No. DHDMSHODDW06 or equivalent in Legrand,L&T,Indoasian.

S&F MCBs SP 6 Amp 240 Volts 10 KA B curve with necessary connection in DB box complete all as specified and directed.

S&F MCBs SPN 32 Amp 240 Volts 10 KA C curve with necessary connection in DB box complete all as specified and directed.

M & L for concealed sub main wiring with two single core cable of 4 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) including earthing wire of pvc insulated stranded 4 sq mm cable ,chess cutting including provision of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and makig good of disturbed surfaces and match with existing shade of wall/roof complete all as specified and directed.

M & L for Earthing with galvanised iron earth plate electrode of size 600 x 600 mm & 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal GL) with top of earth plate not less than 1.5 meter below GL connected to GI earth lead wire 4 mm dia connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 15 mm dia medium grade ISI marked GI pipe not less than 7.5 meter long all as shown in electrical plate No. 3 MES Schedule Part 1, with & including ; PCC 1:3:6 type C1( using 20mm graded aggregate) reinforced with welded steel wire fabric not less than 4 Kg per Sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with mixture of common salt & charcoal, necessary excavation and earth works in any type of soil, including testing & commissioning, complete all as specified and directed. (Note :- GI earth wire with GI pipe protection beyond 7.5 meter measured & paid separately)

M & L for GI earth lead wire of size 4.0 mm dia as earth continuity conductor as main earthing lead fixed to wall on batten or recesses as chases or buried in ground or drawn in pipe fixed to pole or any other indicated situation complete all as specified & directed

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth and getting out in any type of soil for laying of cable, pipes etc. complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for fine dry sand cushioning to under ground electric cable complete all as specified and directed. Note :- Punned down thickness shall be measured for payment.

Supplying & laying of bricks old pattern class 'B' for cable protection complete all as specified and directed.

Supplying & laying GI Tubing 25 mm dia Light grade with connecting accessories complete laid in trench or fixed in road or surface /wall for protection complete all as specified and directed.

Supplying, laying, testing and Commissioning cable XLPE insulated aluminium conductor,stranded, armoured, PVC sheathed, LT 1100 volt grade, heavy duty as per IS-7098 and providing suitable lugs and cable glands, laid in trenches/ ducts/fixed to wall/ roof/ poles including taking down existing cables complete all as specified and directed of following sizes. (a) 16Sqmm 3.5 core

PURVA ENTERPRISES

M/s Dara Constructions, Pulgaon

chronicle enterprises

M/s S. S. MUNDE