SPL REPAIR TO BLDG NO ET -08 (OFFICE OF PAO (OR) AEC/IFA TO STN CDR) AT PACHMARHI MIL STN

Amount

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified & directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed.

M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified & directed.

M&L for 10 mm thick randering in cement mortar 1 : 4 for fixing of wall tiles complete all as specified & directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specified & directed.

M&L for 50mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interwal and corner complete all as specified and directed.

S&F for channel, angle or tee sections, Flat iron Square/rectangular section fixed independently, without connecting plates, flat iron etc. cut to ordinary length for making steel racks in stores and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

Dismantling timber scantlings as in framed work 40 sq. cm and over in section, in any position complete all as specified & directed.

S&F for MS framed works as in trusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried complete all as specified & directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including ridge of same colour fixed with self tapping screws complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick as in ridge,hip,valley,gutter of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified & directed.

M&L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of bk/concrete surfaces in CM (1:6) finished even and smooth (without using extra cement ) complete all as specified & directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified & directed. Note : Liquid WPC will be measured and paid separately.

Supply only liquid water proofing compound , ISI marked complete all as specified & directed.

M & L for preparation of surfaces of wall & concrete and applying 1 mm thick wall care putty including preparation complete all as specified & directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of weather proof antifungal paint exterior emulsion Apex paint over & including one coat of primer complete all as specified and directed.

M&L for preparation of old plastered or decorated surfaces of wall and applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified & directed.

M&L preparation of old plastered or decorated surfaces of wall and applying two coats of weather proof antifungal paint exterior emulsion Apex paint over & including one coat of primer complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc 1.5 sqm not e xc. 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified & directed.

S&F 2nd class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specified & directed.

S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified & directed.

S&F ordinary quality 3 mm sheet glass and glazed with oil putty n exc 0.50 sqm in each pane complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

M&L Aluminium powder coated (powder coated of requried colour) doors frame top & sides of size 100 x 84.45x 3.00 mm , bottom size 100 x 84.45x 3.00 mm and shutter top & bottom of size 100 x44.45x3.00 (section No 21545) and sides (handle) of size 100 x 44.45x 3.00 mm (section No 20653 and lock side shutter frame of size 100 x 44.45x 3.00 mm (section No 20653) including rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified & directed.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x45x2.00 mm (section No 21518), bottom size 92x45x2.0mm (section No 21514) and shutter top & bottom of size 52x18x2.0mm (section No 21649) and sides (handle) of size 52x18x2.00mm (section No 21649) and lock side shutter frame of size 52x18x2.00mm " with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified & directed.

S&F aluminium powder coated ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as specified & directed.

S&F aluminium powder coated grill of 7.00 mm dia squares rectangular triangular circular shape aperture n.exc 7.00cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent complete all as specified & directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening complete all as specified & directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed.

S&F in repair Harrison rails, anodised aluminium alloy , chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed.

S&F for sliding door bolt of Aluminium alloy anodised 250 mm complete all as specified & directed.

S&F 100 mm size Butt hinges, extruded SS with steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified & directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified & directed.

Dismantling PVC water tanks Exc 500 ltrs but not 1000 ltrs including taking down of float valve and removing from site complete all as specified & directed.

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 complete all as specified & directed.

S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified & directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified & directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified & directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified & directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified & directed.

S&F in repair bib tap 15 mm bore fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified & directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified & directed.

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified & directed.

S&F in repair vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified & directed.

S&F in repair Vitreous China urinals, half stall type, complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing urinalback in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union fo rdischarge pipe complete all as specified & directed.

Supply only 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified & directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified & directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified & directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

Supply only PVC connection 15mm size with PTMT nut of length 450mm complete all as specified & directed.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified & directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified & directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified & directed.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified & directed.

S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified & directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified & directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.

Dismantling of ceiling board with fittings and any description including cover fillets complete all as specified & directed.

M&L for suspended false ceilling comprising of 4 mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 6mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long complete all as specified & directed.

M&L for taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, etc.complete all as specified & directed.

M&L for one light point controlled by one switch.point re-wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black and earth continuity conductor 1.5 sqmm Green) drawn into and including PVC casing-caping not less than 32x12 mm ISI marked ivory colour with all fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete all as specified & directed.

All as per item No 80 above but one fan point controlled by one switch complete all as specified and directed

All as per item No 80 above but one socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed

All as per item No 80 above but one socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed

All as per item No 80 above but one bell point controlled by one bell push complete all as specified and directed.

M&L for point re-wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm Green) drawn into and including PVC casing-caping not less than 25x12 mm ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover complete for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed. .

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed. .

S&F bell push, flush type, 6 amp 240 volts complete all as specified and directed.

S&F call bell, AC, 240 volts, single pole complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

S&F Hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-SH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into into including PVC casing-caping not less than 25x12 mm ISI marked of size 2x6 sqmm + 1x6 sqmm earth wire (Nominal size) complete all as specified and directed.

S&F LED Smart bright batten (1150mm) made of PC housing integrated LED driver with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. complete all as specified and directed.

S&F LED Smart bright batten (600mm) made of Aluminium housing integrated LED driver with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not less than 9 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete complete all as specified and directed.

S&F energy efficient recessed mounted LED luminaire 36 Watt suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. complete all as specified and directed.

S&F in renewal 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp complete all as specified & directed.

S&F SPN DB (Double Door), 240 volts, 8 ways MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 54 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified & directed.

All as per item No 100 above but TPN, (Double door) 415 volts, 4 ways . complete all as specified and directed.

S&F Single pole 6 to 32 amp MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified & directed.

All as per item No 102 above but double pole 10 to 32 amp complete all as specified and directed.

All as per item No 102 above but MCB Four pole 40 to 100 amp complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified & directed.

Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete all as specified & directed.

M/S Shanti Enterprises (BID ID -3172591)

CREATIVE CONSTRUCTION (BID ID -3172463)

M/S RAKESH TRADERS (BID ID -3172372)

Dev Enterprises (BID ID -3167233)

GHASI RAM SAHU (BID ID -3166984)

SUBIR KUMAR ROY (BID ID -3166333)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3165172)