SPL REPAIR TO EXISTING DRAINAGE LINE AND CERTAIN BLDGS AND PROVN OF SEWAGE LINE AND PARKING SHED AT MIL STN UNDER GE (N) BIKANER

Amount

De-sludging by removing of solid/semi solid sludge from existing drainage of any depth and capacity in foul conditions including taking and placing in position the cover slabs of any description including cement sand mortar 1:4 if required . Removal of will be remove to any place out side defence land or depositing where directed by Engr-in-Charge all as specified and directed.

Excavation in trenches n exc 10Sqm on plan n exc 1.5 m deep and n exc 1.5 m wide , getting out in any type of soil.

Excavation in trenches in soft/loose soil, n. exc. 1.5 m wide and exc 1.5 m but not exc 3 mtr in depth; for foundaton, etc. or for shafts, well, cesspits, manholes, pier holes,cable and getting out.complete all as specified.

Excavation in trenches in hard dense or bitumen paver soil, n. exc. 1.5 m wide and n. exc 1.5 m in depth; for foundaton, etc. or for shafts, well, cesspits, manholes, pier holes and getting out. complete all as specified.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness. complete all as specified.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point.complete all as specified.

M&L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layer n exc. 15 cm thick watered and rammed to a true surface complete all as specified.

M&L for 75mm thick PCC (1:4:8), type C2 using 40mm graded stone agg as in sub base of floors etc finished even and rough complete all as specified and directed.

Dismantling Asbestos cement Corrugated sheets in roof covering including ridges .complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down shutter exc 1 sqm and n exc 2 sqm each and refixing in the same opening after rescuring or easing & adjustment all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Demolition of Brickwork or stone/ boulder masonry, built Cement mortor ortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Demolition of cement concrete (unreinforced) In ground floors and pavings n exc 15 cm thickness (below or above ground level) complete

Demolition of reinforced cement concrete in roof floor (other than ground floors beams staircase, landing chajja, drain cover and similar work) all as specified.

M&L for conc 1:3:6 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

S&F salt glazed stone ware drain pipe 150mm bore in trenches and jointed complete all as specified and directed

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work complete all as specified and directed

M&L for PCC 1:2:4,type B-2 using 40mm graded crushed stone aggregate as in sub base and mass conc complete all as specified and as directed by Engineer-in-Charge.

M & L RCC Nominal Mix Type 1:2:4 type B-1 (using 20 mm graded stone aggregate) as manhole covers/ Drain cover set in CM (1:4) (vibromechenically floated) including all use of forms, moulds or machine moulds and setting the blocks, slabs etc complete all as specified and directed. (Reinforcement shall be measured and paid separately under respective item of schedule "A") .(Note : Curing arrangements shall have to be made by contractor at its own with out any claim on cost incurred)

M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar1:4.(Note : Slab covers shall be floated with surface vibrator,and over turfed base ,arrandement for turfed base has to be from contractors side)

M&L for mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed

M&L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia complete all as specified and directed

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc complete all as specified and directed

Dismantling floor hearth or wall terrazo or tiles in bath, WC and kitchen etc including ceent mortar bedding but not backing removing serviceable tiles to store and rebbinsh off the premises complete all as specified and directed

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and directed

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position. complete all as specified and directed

Dismantling water tanks and removing to store exc 500 ltrs and nexc 1000 ltrs complete all as specified and directed

M&L brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed.

M&L brick work in cement mortar (1:4) using old size sub class 'B' bricks in walling, straight or curved on plan exc 6m mean radius all as specified.

M&L half brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified.

M&L for Rendering 10+5 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even complete.

M&L for Preparing new/old platered surface and applying two coats of white wash on wall complete all as specified and as dircted by Engineer-In-Charge.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

Suplly only liquid water proofing compound ISI marked complete

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vetical surface mplete all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M & L for Screed bed or bedding layer of mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.

M&L Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

S & F for 1.25 mm thick pressed steel frames of size 125mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns

M&L for providing cement concrete 1:3:6 type C-0 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hardwood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass guage, etc. (without sash bars), edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass,etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a); supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-charge.

Material and labour for 150mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed

S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and incl. a minimum of 6 bolts and nuts four on bolt plate and two on staple plate of 300 mm long complete all as specified and as directed by Engineer-In-Charge.

S&F brass 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by engineer-in-charge.

S&F for 150mm size Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

Supply and fixing of 100 mm But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

S&F steel locking bolts with mils steel electrogalvanised plate and bright bolt ont less than 10 mm dia and 100 mm size, complete all as specified .

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.

S&F factory made mild pressed steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) Opening incl provn shutter for cooler to be provided

S&F factory made mild pressed steel Ventilator box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 all as specified .

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture1.18mm complete all as specified and directed

M&L plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete such as sunken floors complete all as specified and directed

M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified.

M&L for pre painted galvalume aluminium zinc cozting GI based corrugated steel Sheet high rib profile tile pattern color coated 0.5 mm thick of 550 Mpa Tensile strength sheets as in roof covering and fixed as per manufacturers instruction (design as app by Engg in charge complete all as spfd )

M & L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete

S&F for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore (minimum weight 210 gms) complete.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

S&F Vitreous China Squatting pan `Orissa pattern` size 550x440mm including integral foot rest, incl P or S trap comp all as specified and fixed in repairs. complete all as specified and directed

M & L for vitreous china wash down water closet pan (Pedestal pattern) with white seat cover and including bend and branch piece required to jointing with existing or new outlet connection comlete including fixing bolts, flushing cistern and flush pipe fixed in repairs complete

S&F in repair health faucet with 1 mtr long tube and hook and knab all as specified and directed by Engineer-in-Charge

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe all as specified.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified.

S & F in repair Viterous China urinal half stall type white including CP spreader, waste pipe etc. complete all as specified and directed

S&F in repair 15 mm bore Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spfd.

S&F in repair chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and directed

S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and directed

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and directed

S&F in repair fancy type chromium plated stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified

S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm complete all as specified and directed

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe complete all as specified and directed

S & F in repair for tubular towel rail of Stainless steel, 20mm dia, D type, 60 cm long between flanges complete.

S & F glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .

S&F in repair 32 mm size cp waste coupling (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe complete all as specified and directed

S&F in repair soap dish complete all as specified and directed Make Jaquar/ cera or eqivalent

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches all as specified.

S&F cast iron soil, waste and vent pipes (sand cast) 50mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F cast iron vent cowl for 50 m dia pipe. all as specified.

S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets/T 100mm bore fitted with oval access door. all as specified.(Larger bore measured)

S&F Cast iron bend (any radius) diminishing pieces or tapers/ Reducers/ Sockets 75mm bore fitted with oval access door all as specified..(Larger bore measured)

S&F 75 mm bore CI floor trap plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 50mm bore pipe complete all as specified and directed

S&F stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe complete all as specified and directed

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified.

M&L for three coats of white wash on walls old plastered surfaces complete all as specified and directed

M&L for three coats of white wash on walls new plastered surfaces complete all as specified and directed

M&L two coats of cement cement base paint on walls including preparation on new surfaces complete all as specified and directed. .

M&L two coats of cement cement base paint on walls including preparation on old surfaces complete all as specified and directed. .

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface

S&f joist channel angle tee section,fixed independently without connecting plates etc including welding as necessary confirming to Fe-290 Gde E-165 complete all as specified and directed

M&L For Steel work in tubular trusses/ purlin including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 ,confirming to Fe-290 Gde E-165 Complete as directed by Engr-in-charge and all as specified.

M & L for plate girder / strut. Post or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices,angle brackets, cleats and other connections Gde Fe410-0 or Fe 310-O. complete all as specified and directed

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-290 Gde E-165 all as specified and as directed by Engr-in-charge.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end andscrewed the other, or screwed both ends, eachscrewed end to be fittedwith washers and onehexagonal or squarenut, n exc 5cm and dia of shank 5 to 10mm complete all as specified and directed by Engineer-in charge.

S & F Steel work in wind ties for roof including cutting holes etc complete all as specified and directed by engr in charge

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete.

M&L for 75mm thick PCC ( 1:3;6) Type C2 using 40mm graded stone/brick aggregate as in sub base of floors etc, finshied / rough even sufaces complete aall as specified and directed byt engr -in-charge

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) and finished even & smooth without using extra cement complete.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 Grade to IS 15658-2006 manufactured using grey cement and with pigment complete all as specified and diredeted

M&L for Sand filling under floor,cushioning under interlocking tiles or in foundation, including watering and consolidated complete all as specified and directed

M&L Brick work with sub class B bricks stainght or curved on plan exc 6m radious brick wall bilt in CM 1:6 complete all as specified and directed

Dismantling of steel structual ( Post / struts /purnling, MS plate, bolts revets, / shed ( GI Sheeting) and refixing same shed in anthoer place where directed not more than 500 mtr distance from dimantled, complete all as specified and directed

S&F 1.25mm Plain, black, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth complete all aspecified and directed by engr -in-charge

S &F SS letters joints with revited or weld with MS sheet or frame completed all as pecified and directed

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down old U/S existing VTPN 4way, DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic rigid PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(b) One 3 pin 5 amps socket on independent board.

Ditto all as per item No 126 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

Removing and re-fixing LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by engineer in charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by engineer in charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 40-63 Amps , 240 volts, breaking capacity 10KA 'C' Curve complete all as specified and as dircted by Engr-in-charge.

S & F MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA 'C' Curve complete all as specified and as dircted by Engr-in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks and all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16sq mm 2 core complete all as specified and directed.

S&F GI tubing light grade 80mm dia for protection of cable on pole/ wall etc complete all as specified and as directed by Engr in charge.

M S GROUP

N.K. CONSTRUCTION COMPANY

m/s gharu constrution company

M/S BIKANER CHEMICAL LABORATORIES