Construction of Staff room for

Amount

Note: Contractor should Quote Rates with all taxes.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) including all carriages, loading, unloading stacking

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size)

Centring /shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, base of columns etc. for mass concrete length of block.

Suspended floors, roofs, landings, balconies and access platform/ shelves slab

Brick work with common burnt clay F.P.S bricks of class designation 75 in superstructure above plinth level up to floor V level in cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages from source to site of work

Providing wood work of kail wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed position: ( 1st class Kail wood)

Providing 40 x 5mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs complete with all leads & lifts:

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level TMT bars of grade Fe-500 D or more

Providing and fixing 30mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood

Providing and fixing 35mm thick flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with butt hinges of required size with necessary screws

15mm cement plaster on the rough side of single or half brick wall with a floating coat of neat cement 1:6 (1 cement: 6 fine sand)

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone agg.

Proiding, applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth

Finishing walls with water proofing cement paint of required shade on New work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new wood work including applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

P/F 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade

Providing and fixing P.V.C. fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes,

Door junction 100mm dia

Plain bends 100mm dia

Reducer 75 x 50mm dia

P/F of P.V.C. Soil/Waste/Ventilating pipes of the following (nominal) j excluding cost of holder-bats and their fixing 150mm N/bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing & fixing of following hardware items

Aldrop

T-bolts 150mm

T-bolt 100mm

Handles 150mm

Handle 100 mm

Providing and fixing G.I. pipes 15mm N/bore (medium B class) complete with G.I. fittings including trenching, refilling, chasing etc. in case of concealed work 15mm N/bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing C.P. brass sanitary installations (approved make) including necessary fittings all complete:

CP bib cocks

Wall mixer

Angle valve

Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and pre-polished, machine cut for kitchen platforms, vanity counters, and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

M/S.SALEEM.ENTERPRISES (BID ID -2328162)

M/S AIJAZ AHMED MIR (BID ID -2328622)

ZUBAIR ALI RAH (BID ID -2328695)

Showkat Ahmad Bhat (BID ID -2327991)