SPECIAL REPAIR TO MEC BUILDING AT IAM,IAF UNDER GE (AF) MARATHAHALLI

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) not exceeding 1.5 Sqm each complete all as specified and directed .

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .

Taking down steel windows completely of size not exc 1.00 Sqm each complete all as specified and as directed.

Taking down steel windows completely of size exc 1.00 Sqm but nexc 1.5 Sqm each complete all as specified and as directed.

Taking down steel windows completely of size exc 1.50 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each as in cupboard shutters/door shutters complete all as specified and as directed.

Taking down and refixing in same opening of shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description as in sunken slabs, existing roof treatment any type complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons including granite slab in kitchen platform Laid, bedded and pointed in any mortar etc complete all as specified and directed.

Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified.

Dismantling boarding, any description, fixed in any position with nails. complete all as specified and directed

Dismantling of floor hearth or wall tiling, terrazo tiles of any thickness including cement mortar bedding (but not backing) removing tiles and rubbish off the premises. complete all as specified and directed.

Removing material or debris retrives from above demolition or cleaning to a distance exceed 1.5 Km and not exceeding 5.0 Km and depositing where directed complete all as specified and directed

M & L for 25mm thick PCC 1:2:4 type B-0, using 12.50 mm grade aggregate as in levelling course in flooring finished even and fair under floor finishes. complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in sub base/roof padding concrete in roof etc complete all as specified and directed.

M & L for 75mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in plinth protection finishing surface even and fair complete all as specified and directed.

M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C-1 using 20mm graded aggregate and setting in cement mortar 1:6 complete, in walls complete all as specified and directed.

M & L Reinforced cement Concrete (Nominal Mix) 1:2:4 Type B-0 using 12 5 mm graded aggregate as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like, or as in parapet wall height up to 12 mtr including setting up scaffolding, ladders, and other temporary structures that allow workers to access different levels of the building , hoisting and lowering including taking all safety measures necessary complete all as specified and directed.

Formwork to fins, louvers, fascia parpetwall and similar work etc and fair finished surface complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel TMT bars 6 to 8mm dia and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290-Gde-E-165. complete all as directed and specified.

M & L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W grade-E 25 quality B. complete all as specified and directed

M & L for rendering 10 mm thick in cement mortar 1:3 finished even and smooth using extra cement with liquid water proofing compound slab treatment as in sunken slab plaster/roof slab treatment complete all as specified and directed. Note : WPC shall be measured and paid separetely in supply only item.

M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in cement mortar 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement. complete all as specified and directed. Note: WPC shall be measured and paid separetely in supply only item.

M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M& L for rendering 10 mm thick cement mortar 1:3 on fair faces of brick work on concrete surfaces on ceiling including finished even and smooth complete all as specified and directed.

Supply only integral liquid water proofing compound. complete all as specified and directed.

Providing and applying HS TPO membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminatin strip and fix it by screw at 300 mm c/c and sealed with HS Jointseal PU on top including surface preparation like remove all loose gravels,dirt,oil,grease,and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO complete all as specified and directed. (Note:- work to be carried out by authorised applicator of M/S Asian or equivalent company.)

M & L for 18 to 20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado or cooking platform, similar work etc laid over cement screed bed 15 mm thick in CM 1 : 4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for glazed ceramic coloured tiles with border tile pattern in vertical surfaces 350 x 250 x 7 mm / 450 x350 x7 mm / 300 x 450 x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and above 10 mm thick cement plaster in 1:3 as backing coat complete all as specified and as directed.

M & L for Double Charged Vitrified Ceramic Colour tiles 9 to 10 mm thick light shade(Square / Rectangular) polished , area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified and as directed .

All as per item no. 36 here in above but as in skirting over cement mortar backing plaster of 10 mm thick in Cement mortar 1:3. complete all as specified and directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of 15 mm thick in cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Supply and fixing Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fixing Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fixing Powder coated Anodised aluminium window and ventilator shutters, fixed type three track windows two glass and one wire mesh shutter without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. Note : Glass pane and SS wire mesh shall be measured and paid separately in supply only item.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed

Supply and fixing Brass 4 lever Mortice lock, vertical type, size 100 mm complete all as specified and directed.

Supply and fixing 35 mm thick, Factory made Flush shutter, solid core construction , with block board core, with lipping all round complete all as specified and as directed .

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

Supply only Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane complete all as specified and as directed.

Supply only 4 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane complete all as specified and as directed.

Supply only 4mm thick figured galss, pin head type as in louvers, fixed glazing not exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing of 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 150 mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and as directed.

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed. complete all as specified and as directed.

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fixing in repairs of mortise lock vertical type brass 100mm 4 lever complete all as specified and directed.

Supply and fixing in repairs 25 mm dia aluminium anodised powder coated type tubular curtains rod including fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fixing Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fixing in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as specified and as directed.

Supply and fixing 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605 mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling baords of any description of any thickness incl cover fillets complete all as specified and directed .

Supply and fixing PVC waste pipe, 32 mm dia, 750mm long, suitable for Kitchen sink,fixed in repairs complete all as specified and directed.

Supply and fixing in repairs Bib taps, CP brass, fancy type, long body with flange, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs, complete all as specified and directed. Make : Jaquar (CAT Part No COP-107PM ), and equivalent of Hindware. Cera, Parryware

Supply and fixing in repairs CP brass,Sink cock with pipe swinging spout ( wall mounted model ) with wall flange , swan neck tap for kitchen sink, complete all as specified and directed. Make : Jaquar (CAT Part No COP-347PM) and equivalent of Hindware. Cera, Parryware

Supply and fixing in repairs fancy type CP brass angle cock of brass chromium plated with ling shank screwed for pipe and fixed 15mm bore fixed to iron pipen complete all as specified and directed. Make : Jaquar (CAT Part No COP-057PM) and equilent of , Hindware. Cera, Parryware

Supply and fixing in repairs Health faucet, CP, with 1.5 metre flexible tube with wall hook, (ABS body) 8 mm dia spirochrome flex tube & wll hook, complete all as specified and directed. Make : Jaquar (CAT Part No ALD-587) or equivalent of , Hindware. Cera, Parryware

Supply and fixing in repairs CP brass Aerator Pillar taps brass chromium plated, fancy type/swan neck type foam flow, screwed down high pressure screwed for iron pipe 15mm bore, fixed complete all as specified and directed. Make : Jaquar (CAT Part No COP-011PM) or equivalent of Hindware. Cera, Parryware

Supply and fixing in repairs S/S Toilet paper holder with flat recessed type complete all as specified and directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm ling between flanges complete all as specified and directed.

Supply and fixing in repair CP towel Ring Square with Round Flange complete all as specified and directed. Make :- JAQUAR Cat Part No-ACN-1121N or equivalent of Hindware. Cera, Parryware

Supply and fixing in repair CP Soap Dis hHolder complete all as specified and directed Make :- JAQUAR Cat Part No-AKP-35731P or equivalent of , Hindware. Cera, Parryware

Supply and fixing in repairs Mirror cabinet 622x422mm complete all as specified and directed

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brakcet guard and railing 60cm long complete all as specified and directed.

Supply and fixing in repair Corner Glass shelf (with bracket) complete all as specified and directed Make : JAQUAR Cat Part No-ACN-1173 or equivalent of , Hindware. Cera, Parryware

Supply and fixing vitreous china wall hung WHB with fixing accessories of size 560x415x200mm Jaquar CAT Part No CNS-WHT-801) with CP brass waste coupling, Jaquar (CAT PART No ALD-705) , waste pipe and full Pedestal (jaquar (CAT Part No -WHT-301 ) complete all as specified and directed Make : Jaquar , or equient of Hindware. Cera, Parryware

Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white, complete with trap, fixed to floor with fixing bolts and seat cover, including connection to drain (or out going pipe) and to flushing pipe, anti - syphonage pipe etc., including making good to floorcomplete, including fixing of PVC flush tank and seat cover complete all as specified and directed

Supply only Plastic water closet seat cover any colour, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed (Note: Seat cover make should be same as of WC make)

Supply only PVC low level flushing cistern, 10 litres capacity, with chromium plated brass inlet and outlet connections including provision of PVC brackets, PVC flush pipe with bend 32 mm dia of suitable length and making necessary connections to water supply pipe line complete all as specified and directed

Supply and fixing PVC connections 600 mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, complete all as specified and directed

Supply and fixing in repairs 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs complete all as specified and directed

Supply and fixing in repairs 32mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs complete all as specified and directed

Supply and fixing in repairs 40mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs complete all as specified and directed

Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 1000 litre capacity and fixed in position all as specified in SSR including dismantling old water tank 1000 litre capacity complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted 500litre capacity and fixed in position all as specified in SSR including dismantling old water tank 500 litre capacity complete all as specified and directed.

Supply and fixing in repairs 40 mm outer dia ball/gate valve screewd both ends for CPVC pipes and fixed complete all as specified and as directed

Supply and fixing in repairs 32 mm outer dia ball /gate valve for screewd both ends for CPVC pipes and fixed complete all as specified and as directed

Supply and fixing in repairs Ball valves high 25mm bore pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

Supply and fixing in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed.

Supply and fixing in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls and ceilings complete all as specified and directed.

Supply and fixing in repairs PVC bends of 110 mm dia complete all as specified and directed.

Supply and fixing in repairs PVC bends of 75 mm dia complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cementbends of 75 mm dia complete all as specified and directed.

Supply and fixing in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 75mm bore of pipes with access door complete all as specified and directed

Supply and fixing in repairs PVC (SWR) junction (Single T) equal or unequal fixed to 110mm bore of pipes with access door complete all as specified and directed

Supply and fixing in repairs PVC (SWR) vent cowl fixed to 110mm bore of pipes complete all as specified and directed

Supply and fixing in repairs PVC (SWR) vent cowl fixed to 75mm bore of pipes complete all as specified and directed

Supply and fixing Stainless steel gratings with frame, 100 mm dia, with/without hole for waste pipe connection complete all as specified and directed

Supply and fixing 5.50 mm sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq m Each pane complete all as specified and directed

Supply and fixing 12 mm thick veneered particle board interior grade , solid core, general purpose type, with face veneers of type BB fixed with screws to aluminium frame work etc, with decorative face veneers both faces complete all as specified and directed.

M&L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for preperation of newly plastered surfaces of ceilings and applying two coats of oil bound distemper on ceiling surfaces over a coat of alkali resistant primer ocomplete all as specified and directed.

M&L for preperation of old decorated surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, oil and gresy spots and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of premium acrylic emulsion paint of required shade over wall surfaces height of Bldgs up to (G+2) including setting up scaffolding, ladders, and other temporary structures that allow workers to access different levels of the building , hoisting and lowering including taking all safety measures. complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint ( 200 micron ) having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over newly plastered surfaces of wall surfaces. complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for prepration of new wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed

M&L for prepration of old wood or wooden based surfaces or perviously treated surfaces,not otherwise described,over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed

Supply and Fixing for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.

Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls complete all as specified and directed

Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as specified and directed

Taking down carefully DB box including MCB, MCCB of any size and any type complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as ceiling fittings, bulk head fittings, tube light fitting etc. for reuse at site or carrying to thestore complete all as specified and directed.

Taking down ceiling fan/exhaust fan,sealing cable end,dismantling blades and removing fan and handing over to MES store complete all as specified and directed

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:-

(a) One light point /Fan point controlled by one switch.

(b) One 5 Amps socket point on independent board.

(c) One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly but wiring for 3 pin 15A socket multipurpose on independent board. complete all as specified and directed

M & L point wiring with 4 sqmm for AC point nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly. complete all as specified and directed

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

Supply & fixing modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed

Supply & fixing modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed.

Supply and fixing LED luminaire 600 mmx 600 mm, 35/36 W 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size. complete all as specified and directed.

Supply and fixing 35/36 W LED Fitting, 1 x 4 recess / Surface LED flat panel with high brightness LED for glare free/shadow less homogenous illumination including LED driver complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and directed.

Refixing of LED light fitting 2*2 / 1*4 recess/surface type complete all as specified and directed.

Supply and fixing Celing Fan complete with blades ,elcetronic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.

Supply and fixing in replacement single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing ceiling rose suarface bakelite three terminals 65x50mm complete all as specified.

Supply and fixing MCB SPN 32 Amps, 'C' series, 240 V complete incl making conections complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections complete all as specified and directed.

Supply and fixing MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

Supply and fixing MCCB DB Vertical TPN 12 way 'A' frame,including MCCB TPN 125 Amp breaking capacity 25 KA- 01 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed.

Supply and fixing MCCB DB Vertical TPN 8 way 'A' frame,including MCCB TPN 100 Amp breaking capacity 16 KA- 01 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed.

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note- (i) Two run of single core 6 sqmm cable and one run 6 sqmm earth wire including PVC concealed Conduit together will be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M & L for sub main wiring complete with four runs of 10 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 10 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note- (i) Four runs of single core 10 sqmm cable and one run 10 sqmm earth wire including PVC concealed Conduit together will be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M & L for sub main wiring complete with Two runs of 2.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed. Note- (i) Two run of single core 2.5 sqmm cable and one run 2.5 sqmm earth wire including PVC concealed Conduit together will be measured as one unit. (ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

Taking down Split/Multi AC unit 1.5/2 Ton capacity/3 ton capacity(indoor and outdoor unit) with voltage stabilizer and AC manager by removing all electrical connections and indoor to outdoor unit gas pipes, nut bolts from HQ bldg and shifting to store for safe custody. After completion of civil work, Refixing/installing Split AC/window AC 1.5/2 Ton with voltage stabilizer at the suitable place by connecting all electrical connections and copper piping with insulation (5/8th x 3/8th and 1/2" x 1/4") with nut bolts as per site requirement, testing and commissioning, if any extra cable ,gas pipes, gas filling require at the time of installation the quoted rate is deemed to be included, No extra cost will be paid to contractor complete all as specified and directed