S R of Udham Singh Jain Hospital (Old Hospital) at Charkhi Dadri in Charkhi Dadri Distt.

Amount

Dismantling of brick work, Tile Masonry or tile lining and tile terracing in cement (HSR 8.5,b)

Removing door and windows(wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled (a) door(HSR 8.18,a)

Windows

Scraping of white washing of colour wash (HSR 8.32,a)

Scraping of cement plaster (HSR 8.32,c)

Dismantling white or coloured glazed tiles (to be carefully removal)(HSR 8.38)

Providing and laying 80mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 30mm thick fine sand complete in all respect (HSR 10.159)

Terracing consisting of tiles 22.86cm x 11.43cm x 3.81cm laid over 87.50mm mud filling on layer of 25mm mud plaster and an other layer of mud mortar for laying the tiles , including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc..(HSR 13.13)

Providing and fixing PVC Rain water pipe 6 kg pressure of ISI mark in cement mortar during masonry work (a) 100mm dia PVC pipe 6 kg pressure(HSR 13.89,a)

Providing and fixing Flase Ceiling with grooves with 12mm to 15mm thick, 600mmx600mm best quality mineral fiber tiles of approved make fixed on M.S steel runner frame i/c cost of screws angles cleats, rawel plugs, with taping and painting etc. complete in all respects as approved by the Engineer-in-Charge.(HSR 13.93)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA AND RAK (HSR 14.89)

Provding and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 15622(thickness to be specified by the manufcturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 23mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry,including pointing in white cement mxied with pigment to matching shades complete(HSR 14.92,a)-Size of ceramic Glazed tiles 200mmx300mm (HSR 14.92)

Size 300 x450 mm

12mm thick Cemet plaster 1:4 (HSR 15.5)

Painting two coats with synthetic enamel paint in all shades onold wood work or metallic or plastered or concrete surfaces to give on even shade including rubbing down old paint (HSR 16.5)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior survaces (HSR 16.25)

Painting One coat with plastic emulsion paint on walls on old work to give an even shade (HSR 16.31)

Providing two coats of exterior acrylic emulsion paint (b) Ist quality (HSR 16.79,b)

Wire gauze fixed on chowats with 25mm thick cover moulding of full width of commercial hard wood such as hollock, champ chikrassy and chaplash, etch. (Non-coniferous timber, other than teak, conforming to I.S. specification No.1003, kiln seasoned)(HSR 17.33)

Cost of aluminium fitting complete for doors and windows, such as tower bolts, handles, etc. and screws for these fittings (excluding sliding bolt)- (b) for double leaf shutter (HSR 17.72,b)

Factory manufactured solid flush door shutters , with block board core as per IS 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot –pressed , conforming to IS 2202 part I and II , fixed in position , including iron hinges , screws , chocks /cleats and stops , etc (excluding the cost of any fittings other than specified above , but including labour for fixing the same in position . Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges. a(iii) 35mm thick(HSR 17.93,a(iii))

Supplying and fixing glass panes including special metal putty of approved malt. :- glass panes 3 mm thick, exceeding 40 sq. dm areas.(HSR 18.30,a)

Pressed steel sheet frames (choekats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs(hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete:- (d) door & windows frame of size 114mmx50mm with 35mm wide double rebate (HSR 18.34,d)

Providing and fixing in position best indianmake ( to the approval of the Engineer-in- charge) Indian type water closet suite consisting of © size 680mm (i) white (HSR 30.1,c(i)).

Providing and fixing in position best Indian make European type water closet suite with concealed 'P or 'S trap with or without vent (as approved by the Engineer-in-charge) and all other necessary fittings as fully described in item no. 30.3 above(i) white(HSR 30.6(i)).

Providing and fixing in positio best indian make a range of three stall urinals 1150mm high in vitreous chinaware with one No. 10 litres capacity CI automatic flushing cistern with fittings and flush pipe complete as fully described in itme No. 30.29 bove (i) white (HSR 30.31,i)

Providing and fixing in position best indian make lavatory suites (Angle back) in vitreous chinaware and all other necessary fittings as fully described in item No. 30.41 above white Size 530mm x 430mm with one no. tap(HSR 30.43)

Providing and fixing in position best indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer in charge)(i) white(HSR 30.44,i)

Providing and fixing stainless steel sink 600x450x200mm size (HSR 30.53a)

Providing and fixing in position best Indian make Towel rails fixed in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect including cutting and making good the walls etc.(i) 750mm long [HSR 30.68 i)

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 Nos. chromium plated brass screws and washers complete including cutting and making good the walls etc.(a) Indian make (i) 600mmx450mm [HSR 30.71,a(i)]

Providing and fixing in position 15mm i/d C.P.bras bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75] (a) Bib cock long body

Bib cock

Providing and fixing in position C.P.brass stop cock (as approved by the Engineer-in-charge) [HSR 30.76,b(i) ](b) 20mm stop cock (i) Stop cock male and female and

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position making connections with inlet and outlet pipes providing over flow and scour provisions with suitable plug on scour pipe including cost of nipples washers flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge (Except civil work)(HSR 30.119)1000 Ltr. capacity

500 Ltr. Capacity

Providing and fixing GI pipes complete with GI fittings and clams, i/c cutting and making good the walls etc. internal work-Exposed on wall (DSR 18.10) 15mm internal diameter of pipeline.

20mm internal diameter of pipeline.

Providing and laying sheet 4mm thick (fiber glass sheet) material singal and suppling mild steel 4" vertical pillar fixed in ground in cement concrete including all fiztures for sun shade (NS)+GST)

Providing and laying GSB in grade I (NS)

Omkar Contractor

M/s Guru Construction Company, Ch. Dadri