REPAIR REPLACEMENT AND MAINTENANCE OF EOT CRANES HOT CRANES AND MISC ITEMS AT WSA 2 WING AND 9 BRD AREA UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

M & L for comprehensive maintenance of EOT cranes of capacity ranging from 0.3 ton to 10 ton capacity consisting of minor repairs/ preventive maint of hoist motor, long travel motor, cross travel motor, gear box, control panel and connected accessories, including oiling, greasing, tightning of nut bolts, checking of thruster brakes, brake shoes, brake setting, rail alignment, hoist spares, complete ete all as specified and directed by Engineer-in-charge.

M & L for comprehensive maintenance of HOT cranes from 0.5 ton to 05 ton capacity consisting of minor repairs/ preventive maint of hoist chain pulley block system, long travel system, cross travel system & connected accessories including oiling,greasing, tightning of nut bolts complete all as specified and directed by Engineer-in-charge.

M & L for breakdown of EOT and HOT Cranes of capacity 0.3 to 10 ton comprising of hoist motor, long travel motor, cross travel motor, gear box control panel and connected accessories, including replacement of the unserviceable spare parts with oiling, greasing etc at site all as specified and directed by Engineer-in-charge. Note:- (a) Quoted unit rate deemed to be include to attend the breakdown as and when required if any spares changed will be measured and paid under relevant item. (b) These items will be measured only when repair and maintenance carried out and serviceability documents duly signed by Contractor, Rep of User & Rep of MES. (c) Breakdown complaints of crane to be attended within 48 hrs after intimation by MES Rep and further repairs to be carried out in reasonable time mutually decided by MES and contractor depending upon the nature of repairs required. (d) Spares shall be measured and paid separately.

Supply only following spares for EOT 0.3 ton to 10 ton capacity crane complete all as specified and directed Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Bearing for LT/CT hoist

Actuator for brake

Thruster brake assembly

Brake shoe with lining

Magnetic Brake coil

Dismantling / Removing existing control & power wiring of long travel/cross travel/main hoist/auxilarry hoist control Panel wiring of EOT Crane and rewiring with PVC insulated copper wire required size for control & for power wiring for proper sequential working of contactors with delay timer, over load relay,MCCB, MCB etc of slip ring motor of diff capacity by making proper connections to contactors, relays, fuses, MCCB, MCB incl testing commissioning complete as directed . Note:- (i) Material such as wires of different sizes for interconnections and hardware, PVC channels, lugs, terminals dinrails connectors, welding work for panel wiring on Eot crane will be include in above rates. (ii) The quoted rate include the cost of painting of existing control panel with two coats of existing coloured paints and any adition/alteration in the existing control panel complete all as directed by Engr-in-charge. (iii) Required components such as MCCB's, MCB's, HRC fuse, power contactors, relays, timers, Single phase preventor , push buttons will measured and paid separetly. (iv) The work is to be done in such a manner that it should not hammper the working schedule of the user. (v) Contractor should visit the site and work out details of required components such as MCCB's, MCB's, HRC fuse, power contactors, relays, timers, Single phase preventor , push buttons etc before quotaing the tender. (vi) Control wiring should be done in such a manner to meet the logic and operation.Suitable skilled rep shall be deputed to do the same. Necessary test reports to be submitted after completion of work. (vi) For payment purpouse one function of power and control wiring measured in Each job.

Taking down of old unsv switch disconnector fuse units and supply and fixing of new switch disconnector fuse units of 63 amps TPN suitable for DIN fuse link complete all as specified and directed by Engineer-in-charge.

Taking down of old unsv switch disconnector fuse units and supply and fixing of new switch disconnector fuse units of 100 amps suitable for DIN fuse link complete all as specified and directed by Engineer-in-charge.

Supply only of VFDs voltage class 400 Volt Drive 0.75 kW (HD) / 1.5 kW (ND) complete all as specified and directed by Engineer-in-charge Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only of VFDs voltage class 400 Volt Drive 1.5 kW (HD) / 2.2 kW (ND) complete all as specified and directed by Engineer-in-charge Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only of new limit switches suitable for EOT crane of any capacity as per existing make complete Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only of LED indication lamp Red, Blue, Yellow of size 22.5mm complete all as specified and directed by Engineer-in-charge Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Taking down of old Unsv trolly cable carrier and supply and fix PVC trolly cable carrier suitable for any type of crane complete all as specified and directed by Engineer-in-charge

M & L for rewinding of induction motor 415 volt, 3 phase 2 to 5 HP with same gauge super enamelled copper wire incl taking down & reinstalling at site and complete testing complete all as specified and directed by Engineer-in-charge

Supply only Gear oil suitable for EOT/HOT crane complete all as specified and directed by Engineer-in-charge Note : Labour charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

M & L for repairs to gear box including replacement of worn out driving/ driven gears, bearings, gear keys, gasket oil seals of capacity 1 ton to 6 ton EOT /HOT crane complete all as specified and directed by Engineer-in-charge

Supply , laying,commissioning and testing multi core PVC insulated, tinned cable of size 1.00 Sqmm 19 core,1100 volt, stranded, copper conductor, flexible,unarmoured cable with suitable size of cable clamps and lugs for crane pendant including dismantling carefully and removing unserviceable cable complete all as specified and as directed.

Supply , laying,commissioning and testing multi core PVC insulated cable of size 4.0 Sqmm 4 core,1100 volt, stranded, copper conductor, flexible,unarmed cable with suitable size of cable clamps and lugs including dismantling carefully and removing unserviceable cable complete all as specified and as directed.

Supply , laying,commissioning and testing multi core PVC insulated cable of size 2.5 Sqmm 4 core,1100 volt, stranded, copper conductor, flexible,unarmed cable with suitable size of cable clamps and lugs including dismantling carefully and removing unserviceable cable complete all as specified and as directed.

Supply only Over load relay for EOT crane induction motor of range 4.5 - 7.5 Amps complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only Over load relay for EOT crane induction motor motor of range 24 - 40 Amps complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only of 2NO& 2NC contacts suitable for 18/32/40 amps contactor. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only Power contactor 40 Amps, 3pole AC 415 V with 1 NO& 1 NC contacts and coil voltage 110 volts AC. complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only Power contactor 32 Amps, 3pole AC 415 V with 1 NO& 1 NC contacts and coil voltage 110 volts AC. complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only Power contactor 18 Amps, 3pole AC 415 V with 1 NO& 1 NC contacts and coil voltage 110 volts AC. complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only Single phase preventor relay with auto and manual reset complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only MCB 40 Amps 10KA, TP 'C' curves in the control panels including dismantling of old unsv one complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply only MCB 10 Amps 10KA, DP 'C' curves in the control panels including dismantling of old unsv one complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

Supply and fixing MCCB 63 Amps, TP,415 volt ,Ics=100%Icu,18 KA with thermal magnetic release in the control panels including supply & fixing suitable size spreader links,phase barrier with suitable nuts,bolts,lugs for termination and any misc items incl addition/alteration for complete fixing in the panel is deemed to be included etc and dismantling of old unsv one complete all as specified and as directed. Note : Fixing charges shall be deemed to be included in Ser Item No 1.00 and 3.00 above

S & F in replacement instrument transformer for crane of capacity 415/110 volts, 800 VA including complete control wiring with suitable size of copper wire all as specified and directed.

Taking down of old unsv wire rope from EOT crane of any size and capacity and Supply and fixing in repair galvanised steel wire rope 8/10mm dia of 6x36 construction of best plough steel having minimum tensile strength of 180kg/sqmm complete all as specified and directed

Disconnecting and taking down from EOT crane unserviceable resistors box of any type,any capacity and any height and Supply and fixing stainless steel resistor box type 4 steps 10 min. rating suitable for 10/17.5 HP Slip ring Motor and Rotor volt 260 complete all as specified and as directed.

Supply and fixing in replacement of Push button Pendants 12 way with emergency switch for cranes all as per sample and details in complete specified and directed.

Supply and fixing in replacement of Push button Pendants 18 way with emergency switch for cranes all as per sample and details in complete specified and directed.

Material and Labour for calibration and load testing of EOT/HOT cranes by providing artificial load (external) of capacity 1.25 times of SWL complete all as specified and directed by Engineer-in-charge for the following capacity cranes :-

EOT Crane upto 0.5 ton capacity

EOT JIB Crane 0.3 ton capacity

EOT Crane 1 ton capacity

EOT Crane 2 ton capacity

EOT Crane 3 ton capacity

EOT Crane 5 ton capacity

EOT Crane 6 ton capacity

EOT Crane 10 ton capacity

HOT Crane 1 ton capacity

HOT Crane 2 ton capacity

HOT Crane 5 ton capacity

Goods-cum-passenger Lift G+3 of Capacity 1000 Kgs

M & L for Cleaning of total structure of EOT crane 0.5 to 2 Ton capacity including , remove all grease, oil . Dust & durt complete form crane platform , all side walls, supporting beams, brackets ,pipesupports , guards complete includings control panels, cabins etc complete and Material & Laying for painting the total structure of crane with existing colour with two coats of synthetic enemel paint with spray gun and writing of SM No. Manufacture's name, CA number and capacity of crane with bright black/red paint complete all as directed by Engr-in-charge. Note:- (i) The quality of paint should be as per existing make :- Nerolac/Asian paints (ii) Necessary saftey measures to be taken by the contractor while cleaning and painting of the crane . (iii) Any damage/loss to the govt property while doing the job of painting will be borne by the contractor. (iv) The cost of T&P such as ropes, ladders, brushs etc required for the job is included in the quoted rates. (v) The work is to be carried out at the height of above 25 feets.

M & L for Cleaning of total structure of EOT crane 3.0 to 5 Ton capacity including , remove all grease, oil . Dust & durt complete form crane platform , all side walls, supporting beams, brackets ,pipesupports , guards complete includings control panels, cabins etc complete and painting the total structure of crane with existing colour with two coats of synthetic enemel paint with spray gun writing of SM No. Manufacture's name, CA number and capacity of crane with bright black/red paint complete all as directed by Engr-in-charge. Note:- (i) The quality of paint should be as per existing make :- Nerolac/Asian paints (ii) Necessary saftey measures to be taken by the contractor while cleaning and painting of the crane . (iii) Any damage/loss to the govt property while doing the job of painting will be borne by the contractor. (iv) The cost of T&P such as Paints , ropes, ladders, brushs, red oxide etc required for the job is included in the quoted rates. (v) The work is to be carried out at the height of above 25 feets.

M & L for Cleaning of total structure of EOT crane 6 to 10 Ton capacity including , remove all grease, oil . Dust & durt complete form crane platform , all side walls, supporting beams, brackets ,pipesupports , guards complete includings control panels, cabins etc complete and Material & Laying for painting the total structure of crane with existing colour with two coats of synthetic enemel paint with spray gun writing of SM No. Manufacture's name, CA number and capacity of crane with bright black/red paint complete all as directed by Engr-in-charge. Note:- (i) The quality of paint should be as per existing make :- Nerolac/Asian paints (ii) Necessary saftey measures to be taken by the contractor while cleaning and painting of the crane . (iii) Any damage/loss to the govt property while doing the job of painting will be borne by the contractor. (iv) The cost of T&P such as, ropes, ladders, brushs etc required for the job is included in the quoted rates. (v) The work is to be carried out at the height of above 25 feets.

Material and Labour for comprehensive servicing of motorised rolling shutter which includes testing of motor, limit switch, break, sensor, operating switch, gear box, motor, operating chain and other connected accessories, including oiling, greasing, tightning of nut bolts alignment of shutter etc complete all as specified and directed by Engineer-in-charge. Note: Spare parts will be measured and paid separately

M & L and taking down for rewinding of induction motor 415 volt, 3 phase 1.5KW suitable for rolling shutter with same gauge super enamelled copper wire incl taking down & reinstalling at site and complete testing complete all as specified and directed by Engineer-in-charge

Taking down of old unsv electric motor of rolling shutter and supply and fixing of new induction motor 415 volt, 3 phase 1.5KW suitable for rolling shutter complete all as specified and directed by Engr-in-Charge

Taking down of old unsv operating switch and Supply and fixing of operating switch for up and down motion of shutter along with PVC enclosure box single door complete as required at site and specified by Engr-in-Charge

Taking down of old unsv HPSV/HPMV highbay light from ceiling installed at the height of 35-40ft and Supply and fixing in replacement of LED highbay light with PDC housing, integral driver, frame, toughened glass & IP 66 protection, 150 Watt, 220/215 Volt 50 Hz with surge protection of 5 KV and housed in pressure die cast and system lumen output should not be less than 120 lumen per watt complete all as specified and directed. Note: Ladder and labour required for fixing and taking down of fixtures at 40ft height shall be arranged by the contractor on its own and cost of same shall be included in quoted rates

Taking down of old unsv HPSV/HPMV highbay light from ceiling installed at the height of 35-40ft and Supply and fixing in replacement of LED highbay light with PDC housing, integral driver, frame, toughened glass & IP 66 protection, 120 Watt, 220/215 Volt 50 Hz with surge protection of 5 KV and housed in pressure die cast and system lumen output should not be less than 120 lumen per watt complete all as specified and directed. Note: Ladder and labour required for fixing and taking down of fixtures at 40ft height shall be arranged by the contractor on its own and cost of same shall be included in quoted rates

Supply and fix single phase DOL strator suitable for up/down motor of rolling shutter provided with motor of capacity 1.5 KW

M & L for taking down of Gear box from motorized rolling shutter and replacing of worn out Gears, Bearings, Oil greasings, and refixing the same and testing commissioning complete all as specified and directed by Engr-In-Charge

M/S. Niksun Electro-Infra Private Limited

PAMS ENTERPRISES

shakti engineering and electrical works