Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹100.0 LAccepted-AOC | ₹100.0 L | L1 | Accepted-AOC Admitted |
Tender Value
₹1 Cr
EMD Value
₹2 L
Closing Date
8 Jan 2019, 2:00 pmClosed
E.E Karimganj RR Diviaion
E.E Karimganj RR Diviaion
Improvement of Road i) from CM Road to Milon Mandir via Bhubrighat Hospital (Ch. 0.0m to 1000.00m) ii) from Sanyashi Bari to Bhubrighat ME School (Ch. 0.00m to 400.0m) under SOPD (ODS) for the year 2018-19 P No KXJ_ KRRD_SOPD(ODS)_TE_18-19_07
2019_PWD_10818_3
KRRD/T-1/SOPD(ODS)/18-19/
Open Tender
Civil Works
Item Rate
120 days
Karimganj
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,000
Empowered Officer ASRB
₹2 L
Yes
3 Aug 2020
2 Jan 2019
9 Jan 2019
2 Jan 2019
8 Jan 2019
2 Jan 2019
2 Jan 2019 - 8 Jan 2019
Amount
CM Road to Milon Mandir via Bhubrighat Hospital (Ch. 0.0m to 1000.00m) Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2 ( Including cost of testing of materials at site and laboratory as directed by the deptt.) (a) from private land
Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.) a) from private land
Granular sub-base with coarse graded Material (Table: 400-2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 grading- II Material
Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density ( with all lead) By Manual Means Grading- III Using Screening Type-B (11.2mm Agg.)
Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage. Including Edge block/ Edge restraints
Construction of unlined surface drains of average cross sectional area 0.40 sqm in ordinary rock to specified lines & grade etc as per approved design & technical specification Clause 307
Slab Culvert Earthwork in excavation for structures as per drawing and technical specification Cl 305.1 including setting out , construction of shoring and bracing , removal of stumps and other deleterious materials and disposal upto a lead of 50 m dressing of sides and bottom and back filling in trenches with excavated materials , Ordinary Soil i) upto 3m depth
Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 803, 1202 & 1203 (PCC Grade M10) i) Nominal Mix 1:3:6
Providing cement concrete for plain/reinforcement concrete in substructure complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, and 204 PCC M15
Providing cement concrete for plain/reinforcement concrete in substructure complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204, iv) RCC M25, Nominal Mix
Providing cement concrete for reinforcement concrete in superstructure complete as per drawing and technical specification Cl.1500, 1600 and 1700 A) with crushed stone aggregate i) RCC M25 nominalmix 1:2:4
Supplying , fitting and placing TMT bar reinforcement in superstructure complete as per drawing and technical specification , Clauses 1002, 1010 and 1202
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Cross drainage work : (HP NP3 1000mm) Earthwork in excavation for structures as per drawing and technical specification Cl 305.1 including setting out , construction of shoring and bracing , removal of stumps and other deleterious materials and disposal upto a lead of 50 m dressing of sides and bottom and back filling in trenches with excavated materials , Ordinary Soil i) upto 3m depth
Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 803, 1202 & 1203 (PCC Grade M10) i) Nominal Mix 1:3:6 (hand mix)
Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204 PCC M15
Providing cement concrete for plain/reinforcement concrete in substructure complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204, PCC M15
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B) 1000 mm dia
Plastering with cement mortar (1:4) , 15 mm thick on brick work in substructure as per drawing and technical specification
Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Sanyashi Bari to Bhubrighat ME School (Ch. 0.00m to 400.0m) Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2 ( Including cost of testing of materials at site and laboratory as directed by the deptt.) (a) from private land
Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) (a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.) a) from private land
Granular sub-base with coarse graded Material (Table: 400-2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 grading- II Material
Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density ( with all lead) By Manual Means Grading- III Using Screening Type-B (11.2mm Agg.)
Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage. Including Edge block/ Edge restraints
Construction of unlined surface drains of average cross sectional area 0.40 sqm in ordinary rock to specified lines & grade etc as per approved design & technical specification Clause 307
Cross drainage work : (HP NP3 1000mm) Earthwork in excavation for structures as per drawing and technical specification Cl 305.1 including setting out , construction of shoring and bracing , removal of stumps and other deleterious materials and disposal upto a lead of 50 m dressing of sides and bottom and back filling in trenches with excavated materials , Ordinary Soil i) upto 3m depth
Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 803, 1202 & 1203 (PCC Grade M10) i) Nominal Mix 1:3:6 (hand mix)
Providing cement concrete for plain/reinforcement concrete in open foundatioin complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204 PCC M15
Providing cement concrete for plain/reinforcement concrete in substructure complete as per drawing and technical specification Cl. 802, 804, 805, 806, 807, 1202, 1204, PCC M15
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B) 1000 mm dia
Plastering with cement mortar (1:4) , 15 mm thick on brick work in substructure as per drawing and technical specification
Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .