REPAIR TO ALL TYPES OF STEEL FURNITURE INCLUDING WELDING, POLISHING, PAINTING ETC AT OTA, MH, 12 MADRAS AND OTHER UNITS AND REPAIRING, POLISHING, PAINTING OF TP/FD, PATTERN FURNITURE INCLUDING REPLACEMENT OF ACCESSORIES AT GENTLE MEN CADETS ACCN

Amount

Chair CB Spl With Hand Rest FD-120(M) R

Removing the seat, back and hand rest of Chair CB Spl and welding the steel frame joints if required and cleaning the painted surface as directed and applying one coat of synthetic enamel paint of reqd shade and colour, complete all as specified in drawing and as directed.

Removing the u/s hand writing board from the chair and supply and fix new hand writing board made of Pre-laminated particle board 18mm thick exterior grade duly PVC edging all-round as per existing size and shape to be fixed with stainless steel screws and complete all as specified in drawing and as directed.

Removing the old seat frame and Supply and fix new seat frame made of 2nd class HW all as shown in drawing , the frame shall be french polished and duly caned with superior quality Plastic cane as specified in drawing and fixed with suitable screws, complete all as specified in drawing and as directed.

All as per Item No 1.03 above but for Back frame, complete all as specified in drawing and as directed.

Taking off existing cane of seat frame cleaning the rebated portions, applying one coat of French polish and recanning of seat frame with new cane plastic, complete all as specified in drawing and as directed.

All as per Item No 1.05 above but for Back frame, complete all as specified in drawing and as directed.

Chair Verandah FD-19, FD-359,256 FD/MAP-II/15

Removing the old damaged cane and Cleaning the old painted surfaces by using different type of abrasive cloth and applying two coat of synthetic enamel white paint all around and provision of 4 Nos. PVS shoes to legs, complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints of conduit tube frame of chair verandah, Grinding and preparation of smooth surface and applying synthetic enamel paint white colour , complete all as specified in drawing and as directed.

Re canning of chair verandah with 4mm wide 0.4 mm thick half round white plastic cane as per drg and complete all as specified in drawing and as directed.

Chair writing FD/E6/MAP/12

Removing the seat, back and hand rest of Chair CB Spl and welding the steel frame joints if required and cleaning the painted surface as directed and applying one coat of synthetic enamel paint of reqd shade and colour, complete all as specified in drawing and as directed.

Removing the u/s hand writing board from the chair and supply and fix new hand writing board made of Pre-laminated particle board 18mm thick exterior grade duly PVC edging all-round as per existing size and shape to be fixed with stainless steel screws and complete all as specified in drawing and as directed.

Removing the old seat frame and Supply and fix new seat frame made of 2nd class HW all as shown in drawing , the frame shall be french polished and duly caned with superior quality Plastic cane as specified in drawing and fixed with suitable screws, complete all as specified in drawing and as directed.

All as per Item No 3.03 above but for Back frame, complete all as specified in drawing and as directed.

Taking off existing cane of seat frame cleaning the rebated portions, applying one coat of French polish and recanning of seat frame with new cane plastic, complete all as specified in drawing and as directed.

All as per Item No 3.05 above but for Back frame, complete all as specified in drawing and as directed.

Chair School with Hand Board FD/E6/MAP/05 .

Removing the existing unserviceable damaged plastic seat & back one piece and S & F new one including suitable s/steel screws and washer , complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged hand board and S & F New board made out of 18mm thick pre laminated MDF Board of required shade with Teak Wood edging all-round, to be fixed to the openable type hinge with new s/steel screws as per drg complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints of MS pipe, any iron part, complete all as specified in drawing and as directed.

Removing the old painted surfaces by using different type of abrasive cloth and applying two coat of synthetic enamel black paint all steel surface and provision of 4 Nos. PVS shoes to legs, complete all as specified in drawing and as directed.

Table 3' x 2' Steel with drawer

Removing the existing unserviceable damaged drawers of Table 3' x 2' and S & F with new drawers made out of 1.00mm thick MS Sheet as per drawing, complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints to the any part of Table, Grinding and applying paint with required shade, complete all as specified in drawing and as directed.

Table Office Clk Steel

Removing the existing unserviceable Lock from Table Office Clk Steel and supply and fix New lock of 6 Lever with duplicate keys of make Godrej/Harrison/Link , complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged drawers of Table office Clk Steel and S & F with new drawers made out of 1.00mm thick MS Sheet as per drawing, complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints to the any part of Table, Grinding and applying paint with required shade, complete all as specified in drawing and as directed.

Almirah Large Steel FD-67(M),FD-1031, FD-1033, FD-351, FD/E6/MAP/18)

Removing the existing unserviceable Handle from Almirah large steel and providing New Handle Chromium plated of size 140-150 mm heavy duty superior quality, complete all as specified in drawing and as directed.

Removing the existing unserviceable Lock from Almirah large Steel and supply and fix New lock of 6 Lever for 3 way locking device with duplicate keys of make Godrej/Harrison/Link, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged Legs of Almirah large Steel and providing new legs made out of 01 mm MS Sheet, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged Shelves of Almirah large steel and providing with new shelves made out of 01 mm MS sheet , complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged aluminium anodized/MS/steel tubes and S/F New CP S/Steel Tube of 18mm dia in existing length and size and fix two 'U' shaped socket by rivet / welded, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged three way locking system from Almirah Large Steel and supply and fix new locking system incl MS rod, complete all as specified in drawing and as directed.

Removing the u/s broken glass from Almirah with glass door and S & F New glass 5mm thick to the door as per existing size and shape and as per drawing.

Provision spot / continuous welding at left out joints of Almirah large, Grinding and complete all as specified in drawing and as directed.

Locker Bed Side Steel

Removing the existing unserviceable Handle from Locker Bed Side steel and providing New S/steel heavy duty D-type as approved Handle 100-120mm, to fix with revit or s/steel screw complete all as specified in drawing and as directed.

Removing the existing unserviceable Hasp & Staple from Locker Bed Side steel and providing New Hasp & Staple s/steel of size 100mm, and to be fitted with rivet complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged Legs of Locker Bed Side Steel and fix new legs made out of 1.00mm thick MS Sheet as per existing size and shape, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged aluminium anodized/MS/steel tubes and S/F New CP S/Steel Tube of 18mm dia in existing length and size and fix two 'U' shaped socket by rivet / welded, complete all as specified in drawing and as directed.

Chair computer FD/E6/MAP/01

Removing existing u/s PU hand rest and S&F new PU hand rest (Set) as per existing shape and size as directed by engineer in charge

Removing existing u/s pedestal (caster wheel base ) with wheel and S&F new pedestal as per existing shape and size with wheel as directed by engineer in charge

Removing existing u/s caster wheel and S&F new caster wheel heavy duty as approved as per existing shape and size and as directed by engineer in charge

Removing existing u/s gas lift mechanism complete with locking system of revolving chair and replacing the same with best quality as per existing size and shape heavy duty as approved and all as directed by engineer in charge.

Removing existing u/s tapestry cloth of seat and S&F new tapestry cloth as per existing pattern and incl PVC lipping and directed by engineer in charge (Rate of tapestry should not be less than 300/- per meter)

Removing existing u/s tapestry cloth of back and S&F new tapestry cloth as per existing pattern and incl PVC lipping and directed by engineer in charge (Rate of tapestry should not be less than 300/- per meter)

Removing existing u/s Polyurethane foam of seat and S&F new PU foam as per existing shape and size and as directed by engineer in charge.

Removing existing u/s Polyurethane foam of back and S&F new PU foam as per existing shape and size and as directed by engineer in charge.

Almirah Med/small Steel FD-67(M), FD-1032, FD-1034, FD-350)

Removing the existing unserviceable Handle from Almirah small steel and providing New Handle Chromium plated of size 140-150 mm heavy duty superior quality, complete all as specified in drawing and as directed.

Removing the existing unserviceable Lock from Almirah small Steel and supply and fix New lock of 6 Lever for 3 way locking device with duplicate keys of make Godrej/Harrison/Link, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged Legs of Almirah small Steel and providing new legs made out of 01 mm MS Sheet, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged Shelves of Almirah Med/small steel and providing with new shelves of size 910 & 430 mm made out of 01 mm MS sheet, complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged three way locking system from Almirah Large Steel and supply and fix new locking system incl MS rod, complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints of Almirah med steel, Grinding and, complete all as specified in drawing and as directed.

Chair CB Tubular Steel With Arms FD-75(M)

Removing the existing broken/damaged wooden seat frame of chair steel tubular and S & F new 2nd class hardwood frame with suitable fully threaded screws and washers duly canned and french polish, complete all as specified in drawing and as directed.

All as per Item No. 13.01 above but for Back Rest, complete all as specified in drawing and as directed.

Removing the existing damaged plastic cane from seat frame of chair tubular steel with arms and recanning the same with plastic cane, complete all as specified in drawing and as directed..

All as per Item No. 13.03 above but for Back Rest , complete all as specified in drawing and as directed.

Removing the existing broken/damaged wooden hand rest of chair steel tubular and S & F with new 2nd class teak wood hand rest including french polishing, complete all as specified in drawing and as directed.

Removing the faded out paint from chair steel tubular with arms by any means and painting the same with one coat of synthetic enamel spray paint of approved OG/Gray colour including fixing of new PVC caps/shoes, complete all as specified in drawing and as directed.

Supply and welding of MS cleat of size 50 x 25 x 4 mm thick Qty 4 Nos in each seat of chair. Each cleat shall be measured as one number, complete all as specified in drawing and as directed.

Table Office Offr Steel

Removing the existing unserviceable Lock from Table Office officer Steel and supply and fix New lock of 6 Lever with duplicate keys of make Godrej/Harrison/Link , complete all as specified in drawing and as directed.

Removing the existing unserviceable damaged drawers of Table office officer Steel and S & F with new drawers made out of 1.00mm thick MS Sheet as per drawing, complete all as specified in drawing and as directed.

Provision spot / continuous welding at left out joints to the any part of Table, Grinding and applying paint with required shade, complete all as specified in drawing and as directed.

Removing all Bends & dents of following steel furniture and cleaning the old faded painted surfaces, weld the steel frame as directed, apply putty/metal paste to obtain even surfaces and scrapping with various sand paper smoothing the surfaces by water sheet and applying one coat of synthetic enamel spray paint OG/Black/Gray or as reqd shade colour superior quality over a coat of red oxide primer, complete all as specified in drawing and as directed.

All as per Item No. 13 above but for Almirah Large Steel FD-67(M),FD-1031, FD-1033, FD-351, FD/E6/MAP/18)

All as per Item No. 13 above but for Almirah Med/small Steel FD-67(M), FD-1032, FD-1034, FD-350)

All as per Item No. 13 above but for Locker Bed Side Steel

All as per Item No. 13 above but for Table 3' x 2' Steel with drawer including fixing 4 Nos PVC shoe

All as per Item No. 13 above but for Table 3'x2' steel w/o drawer including fixing 4 Nos PVC shoe.

All as per Item No. 13 above but for Table Dining ORs including fixing 4 Nos PVC shoe

All as per Item No. 13 above but for Table Office Clk Steel including fixing 4 Nos PVC shoe.

All as per Item No. 13 above but for Table Office Offr Steel including fixing 4 Nos PVC shoe

All as per Item No. 13 above but for Teapoy Verandah including fixing 4 Nos PVC shoe

Removing the existing u/s table Top of the following items and S & F new table top of required size which shall be made of 18/19 mm thick prelaminated MDF board both side, exterior grade (grade-I, type-II) ISI marked with approved walnut colour or shade as approved by GE of (make : Century prowud from Century ply/Green panel max from Green ply/Action Tessa) with 2 mm thick PVC edging of matching colour all round on head board and footboard shall be fixed with strong bonded chemical through hot pressed machine to be provided as per standard workmanship and all as per drawing and as specified and as directed. Note: Hand pressed/manual pressed beading/edging will not be accepted.

Table 3' x 2' Steel with drawer FD-1008

Table 3' x 2' Steel without drawer FD-1007

Table Dining Ors FD-165 (M)

Table Office Clk Steel FD-84, 381

Table Office Offr Steel FD-84

Teapoy Verandah MAP, FD-383

Chair CB Tubular Steel Without Arms FD-75(M)

Removing the existing broken/damaged wooden seat frame of chair steel tubular without arms and S & F new 2nd class hardwood frame with suitable fully threaded screws with washer, duly canned and french polished, complete all as specified in drawing and as directed.

All as per Item No. 17.01 above but for Back Rest, complete all as specified in drawing and as directed.

Removing the existing damaged plastic cane from seat frame of chair tubular steel and recanning the same with plastic cane, complete all as specified in drawing and as directed.

All as per Item No. 17.03 above but for Back Rest, complete all as specified in drawing and as directed..

Supply and welding of MS cleat of size 50 x 25 x 4mm thick Qty 4 Nos in each seat of chair. Each cleat shall be measured as one number, complete all as specified in drawing and as directed.

Removing the faded out paint from chair steel tubular without arms by any means and painting the same with one coat of synthetic enamel spray paint of approved OG/Gray colour including fixing of new PVC caps/shoes, complete all as specified in drawing and as directed.

Table Computer (FD/E6/MAP/03), TP

Removing the existing u/s table top of the table and S & F new table top made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round hot pressed machine finished 2mm thick PVC edging and fix the top with new s/steel screws and all as specified and as directed.

Removing of u/s telescopic channel from the drawer ,pull out mouse tray and S & F new telescopic channel 12" (Make : Hettich/Godrej/Link) with s/steel screws for smooth functioning and as directed

Removing of u/s telescopic channel from the Key board trey and S & F new telescopic channel 14" (Make : Hettich/Godrej/Link) with s/steel screws for smooth functioning and as directed

Removing the existing u/s Key board trey of the table and S & F new Key board made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round teakwood edging and fix to the telescopic channel and all as specified and as directed.

Removing the existing u/s pull out mouse trey of the table and S & F new pull out mouse trey made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round teakwood edging and fix to the telescopic channel and all as specified and as directed.

Removing the existing u/s drawer of the table and S & F new drawer made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round teakwood edging and fix to the telescopic channel and all as specified and as directed.

Removing the existing u/s side of the table and S & F new side made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round teakwood edging and fix to the frame as per drg and and all as specified and as directed.

Removing the existing u/s bottom shelf of the table and S & F new bottom shelf made out of pre-laminated Particle board exterior grade 18mm thick of required size and shape with all-round teakwood edging and fix to the frame as per drg and all as specified and as directed.

Removing the faded out paint from computer table by any means, tighten the frame incl spot welding where ever required and painting the same with one coat of synthetic enamel spray paint of approved colour including fixing of new PVC caps/shoes, complete all as specified in drawing and as directed.

CHAIR DINING WITHOUT ARM REST (Make Usha lexus) Repairs to Chair Dining without armrest by removing the following existing u/s wooden members and providing new first class hard wood (teak) members,( variable places / sizes) made to existing shape all as specified and shown on drawing.

Rear leg of size 916 x 30 x 30mm

Front leg of size 394 x 44 x 38mm

Side rail of seat frame size 394 x 64 x 21mm

Front Rail of Seat Frame 445 x 64 x 21mm

Back Rail of Seat Frame 445 x 64 x 21mm

Stiffener (Side) 463 x 25 x 25mm

S&F of corner bracket made out of 1st class hard (Teak) wood of size 60 x 60 x 25mm thick

Removing the existing u/s seat and supply and fix new removable seat of existing size and shape with 75mm thick 40 Density foam cushion covered with best quality rexine approved by GE (cost of the rexine not less than Rs.300/- per mtr) over 12mm thick BWR gde plywood and finish with existing shape and size, complete all as specified and as directed.

Tightening the wooden members with bamboo pins where ever required in the chair to made to existing shape all as directed and Preparing the surface of chair dining without arms by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth or various sizes and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coat of melamine polish with spray machine to the entire external and visible surface complete uniformly upto glossy mirror finish, melamine polish of (Make : Asian/Berger/Nerolac), complete all as specified in drawing and as directed.

CHAIR DINING WITH ARM REST ( Make: Usha Lexus ) Repairs to Chair Dining with armrest by removing the following existing u/s wooden members and providing new first class hard wood (teak) members,( variable at places / sizes) made to existing shape all as specified and shown on drawing

Rear leg of size 855 x 40 x 40mm

Front leg 362 x 50 x50mm

Side rail of seat frame size 425 x 74 x 19mm

Front Rail of Seat Frame 457 x 74 x 19mm

Back Rail of Seat Frame 457 x 74 x 19mm

Removing the existing u/s seat and supply and fix new seat of existing size and shape with 75mm thick 40 Density foam cushion covered with best quality rexine approved by GE (cost of the rexine not less than Rs.300/- per mtr) and finish with existing shape and size, complete all as specified and as directed.

Repairs to Chair Dining with armrest by tightening the wooden members with bamboo pins where ever required,( variable at places / sizes) made to existing shape all as directed Preparing the surface of chair dining with arms by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coat of melamine polish to the entire external surface complete uniformly with glossy finish painting , complete all as specified in drawing and as directed.

DINING TABLE OF SIZE 2133 X 1067 X 756MM Preparing the surface of Dining Table by smoothly / rubbing with 120 Gde sand paper/ abrasive cloth and clean off the stains and upper coat in a manner that the remaining coats of melamine are left on the surface by applying sealer wherever required to fill and smooth the surface including applying two coat of melamine polish with spray machine to the entire external/visible surface complete uniformly upto glossy mirror finish , complete all as specified in drawing and as directed.

DINING TABLE OF SIZE 2139 X 1219 X 711mm WITH SQUARE LEGS. All as per Item No.3 above but of size 2133 x 1219 x 711 mm with star legs.

Supply and fix PVC shoes of reqd sizes heavy duty best quality at bottom of each leg of chairs dining and Tables dinings etc , complete all as specified and as directed.

Repairs to Tip- up Auditorium Chairs by removing the following existing unserviceable members and providing new members (TP)

Removing the existing unserviceable rexine from the seat of Tip- up Chairs, and supply and fix new rexine (textile) fabric coated of approved quality as per existing shape & size including E type PVC Beading all as specified and directed. (Cost of Tapestry should not be less than 300/-per meter)

Removing the existing unserviceable rexine from the back of Tip- up Chairs, and supply and fix new rexine (textile) fabric coated of approved quality as per existing shape & size including E type PVC Beading all as specified and directed. (Cost of Tapestry should not be less than 300/-per meter)

Removing the existing unserviceable foam cushion from the seat of Tip- up Chairs, and supply and fix new polyurethane foam cushion of 40 density as per existing shape & size all as specified and directed

Removing the existing unserviceable foam cushion from the back of Tip- up Chairs, and supply and fix new polyurethane foam cushion of 40 density as per existing shape & size all as specified and directed

Removing the existing unserviceable beading from Seat & Back Rest and supply & fix new PVC 'E' Beading heavy duty of existing size and shape as per the direction

Removing the existing unserviceable pvc wheels/rings from the sliding apparatus of the seat and supply and fix new pvc wheels as per the existing arrangements and as directed

Removing the unserviceable pvc bush from the existing push up system and supply and fix new pvc bush as per the existing arrangement and all as directed

Removing existing damaged springs of tip up chairs and supply & fix new spring 100 mm long best quality heavy duty as existing for Tip-up chairs

Cleaning of pushing slide wheel with kerosene oil and apply best quality grease to easy and noise free movements of seal all as directed

Tightening the loose nut and bolt and replacement of rusted nut and bolts with new s/steel nut and bolts where ever required to tighten the frame and ensure smooth movement of Tip- up Chairs as per std workman ship and as directed

Chair dinning offr cushioned, FD/MAP-II/04 , FD/E6/MAP/10

Removing existing damaged/UNSV seat cushion with cover of chair dining officers MAP and S&F of new cushion 75mm thick and 40 density covered with tapestry cloth of approved shade/quality and texture, rate not less than Rs- 450/- per meter all as specified and shown on drawing and as directed by engineer in charge. Make :- Kurlon (Gold line plus) / Duroflex gold Plus /sleep well (Cool Gel S)

Removing the U/s plywood of seat and supply and fix new 12mm thick plywood BWR grade of suitable size for seat as per drg.

Removing u/s back rest strips and supply and fix new back rest strips of size 15mmX30mm teak wood vertical strips as per drg.

Removing u/s front leg and supply and fix new front leg 35mmX50mm of suitable size made of teak wood as per drg

Removing u/s rear leg and supply and fix new rear leg 35mmX50mm of suitable size made of teak wood as per drg

Removing u/s stiffener and supply and fix new 20mmX25mm teak wood stiffener as per drg.

Removing of old u/s corner bracket and Supply and fix new 75x75x20mm teakwood triangular corner bracket with fevicol and steel screws.

M&L for french polish of Chair dining cushioned of approved colour and shade after smoothening and preparation of old and new surface as per trade practice and standard workmanship including necessary preparation and complete removal of the old polished surfaces by sand papering and removing the stains and rectifying the cracks and holes with filling materials like glue, wood putty etc mixed with polish of any description, width or girth to achieve glossy finish of natural teak/walnut finish or shade and finish on exposed surfaces by means of spray polishing and as directed incl 04 Nos PVC shoe best quality to be provided to each chair and fixed with steel screws and as directed. The workmanship should be as per trade practice and standard workmanship.

Sofa set 5 seater (3+1+1) Godrej model: L43 & L41

Removing existing damaged/US seat cushion of Model L 41 & L43 Sofa set 5 seater and supply and fixing of new seat cushion made of moulded type cushion of 50-55 density of size 510x490x70mm of make Godrej as per existing pattern, size and shape and all as directed

Removing existing damaged/US back cushion of Model L 41 & L43 Sofa set 5 seater and supply and fixing of new back cushion made of moulded type cushion of 50-55 density of size 510x490x70mm of make Godrej as per existing pattern, size and shape and all as directed

Removing existing damaged/US replaceable seat cover of Sofa set 5 seater (3+1+1 from each set) Model L 43 & L 41 of Godrej make and supply and fixing of new replaceable fabric upholstery cover best and approved quality incl heavy duty Zip arrangements of approved black colour suitable for existing shape and size of the seat cover (Cost of tapestry should not be less than 400/- per meter) and all as directed

Removing existing damaged/US replaceable back cover of Sofa set 5 seater (3+1+1 from each set) Model L 43 & L 41 of Godrej make and supply and fixing of new replaceable fabric upholstery cover best and approved quality incl Zip arrangements heavy duty of approved black colour suitable for existing shape and size of the back cover (Cost of tapestry should not be less than 400/- per meter) and all as directed

Removing existing damaged /US Clamps for Sofa set 5 Seater Model L 43 and L 41 of Godrej make and supply and fixing of new clamps as per existing shape and size with suitable screw and as directed

Removing existing damaged/US 1/2 round PVC bushes from sofa set 5 seater model L 43 and L41 of Godrej make and supply and fixing of new 1/2 round PVC bush best quality heavy duty to back of arm rest suitable to 38mm dia of ERW tube as per existing shape and size and all as directed

Removing existing damaged /US bushes screwed type from front legs of sofa sets 5 seater model L 43 and L 41 of Godrej make and supply and fixing of new bush with adjustable s/s screwed type to front legs as per existing shapes and size and all as directed

Removing existing damaged/US hard PVC bushes of back leg from sofa set 5 seater model L 43 and L41 of Godrej make and supply and fixing of new hard PVC bush of best and approved quality suitable to the 38mm dia of ERW tube as per existing shape and size and all as directed

Removing and cleaning the old painted surface from sofa set 5 seater model L 43 and L41 of Godrej make by scrubbing smoothing the surface by emery cloth, tightening the frame and replacement of old rusted nut and bolts and screws with new S/steel nut and bolts/screws and applying two coat of synthetic enamel paint of reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Computer operator chair Godrej PCH-5002T

Removing existing U/S cushion from seat Assembly and S&F new cushion moulded type 50mm thick, 50-55 density of required size of existing pattern and shape duly covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing U/S cushion from back and S&F new cushion moulded type 50mm thick, 50-55 density of required size of existing pattern and shape duly covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) complete all as specified in drawing and as directed.

Removing existing US PU hand rust 'T' Type and supply and fixing new PU hand rest 'T' Type as per existing pattern as directed

Removing existing pedestal (caster wheel base) and S&F new pedestal S/Steel star wheel base with wheel of heavy duty and approved quality as per existing pattern and as directed.

Removing existing US caster wheel and S&F new caster wheel (set of five) heavy duty of approved quality as per existing pattern as directed.

Taking down the Gaslift and mechanism with uplock of revolving chairs and replacing the same with heavy duty Gaslift of approved quality as per existing model and as directed.

Chair writing Make: Godrej Model CH -1018

Removing existing U/S cushion, tapestry from seat Assembly and S&F new cushion 50mm thick, 40 density of sizes 400mmx400mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) over a plywood of 12mm thick duly fixed with suitable s/steel nut and bolts as existing complete all as specified in drawing and as directed.

Removing existing U/S cushion, tapestry from back Assembly and S&F new cushion 50mm thick, 40 density of sizes 400mmx250mmx50mm of existing pattern size and shape, covered with tapestry cloth of approved colour and quality (rate of tapestry cloth should not be less than Rs 300/- meter) over a plywood of 12mm thick duly fixed with suitable s/steel nut and bolts as existing complete all as specified in drawing and as directed.

Removing and cleaning the old painted surface by scrubbing smoothing the surface by emery cloth and applying two coat of synthetic enamel Black paint or reqd shade to match with the existing shade, complete all as specified in drawing and as directed.

Removing of existing PVC Caps from the leg and Supply and fix new Hard PVC caps to the bottom of the legs of approved quality heavy duty and all as directed.

M/s N SURENDRAN (BID ID -3298821)

SHANMUGA TRADERS (BID ID -3296643)

SIVA ENTERPRISES (BID ID -3298108)