PROVIDING AND FIXING SIGNAGE BORAD AT I.A. MASOORIE GULAWATHI ROAD DISTT HAPUR

Amount

Supply & hoisting of 12-15 M span overhead structure in position with two vertical post of 6 M clear height from the top of the RCC foundation made of 300 mm dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners and two numbers 10 mm thick MS plate at top welded with structure of 50 mm NB(M) pipe compromising of horizontal, vertical pipe of 40mm NB(M) & bracing pipe of 32 mm NB(M) as per structureal desing of an approved drawing with vertical and lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coat of synthetic enamel paint on the whole structure and installed as per clause 802.7 over a design support system made up of concrete including excavation lean concrerte 1:4:8 cement coarse sand and approved 20 mm grit & RCC 1:2:4 cement, coarse sand and approved 20 mm stone grit complete for fixing the complete structure in position as per direction of enginneer incharge.with 7 year warranty rates include design, fabrication, supply, transportation & erection of signboard and inclusive of all taxes royalty GST etc. all T & P, machine, labour & material required for completion of work.

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with 3M high intensity prismatic reflective sheeting series 3930 letter/Symbols shall be made of same retroreflective sheeting series computer cut as per colour required boards are to supplied alongwith back support frame of MS angle size 35x35x5 mm and back side of alluminium sheet shall be painted with stove enamel paint with 7 years warranty Rates include design, fabrication, supply, transporetation and erection of the sign board and also inclusive of all taxes, royalty, GST etc. all T&P/Machine material and labour required for proper completion of work. SI No. 4 SOR SRE (Signage item)

Providing and erecting direction & Place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3 fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle, iron post 75x75x6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cemenet concrete 45x45x60 cm, 60 cm below ground level & 1.5 to 2.0 M above ground level as per approved drawing with 7 years warranty. Rates include design fabrication, supply, transporetation and erection of the sign board and also inclusive of all taxes, royalty, GST etc. all T&P/Machine material and labour required for proper completion of work. Size of borads:- 90 x 90 cm SI No. 2 SOR SRE (Signage item)

Kailash and company

Dev Enterprises