SPL REPAIR TO BLDG NO P-55 OF STATION GAS SEVA GODOWN AT PACHMARHI MIL STN

Amount

Dismantling asbestos cement corrugated or semi-corrugated sheets including AC ridges etc., as in roof covering, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description including doors and gates etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

Material & labour old size brick work with sub class 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

M & L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for rendering 12mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.brand/make.

M & L for proving cement concrete type C1 1:3:6 using 20mm graded aggregate as in roof kerb or mud stops, round on edges complete all as specified and directed.

M &L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cement complete all as specified and directed .

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in chajjas complete all as specified and directed

M & L for RCC 1:2:4 type B-1 ( 20 mm graded stone agg ) as in Beams , cantilevers, bressummers, lintels etc complete all as specified and directed

Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in column, pillar, post, etc. complete all as specified and as directed

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

Use and waste of form work to sides of columns, pillars, posts, struts, etc. for rough finished surfaces of concrete complete all as specified and as directed.

S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

M & L for Cement concrete type D-2 1:4:8 using 40mm graded stone aggregate as in columns, pillars, boundary pillars and post etc complete all as specified and directed.

Supply and fixing mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed.

Supply and fixing mild steel framed work as in doors or gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

Supply and fixing (in repair) MS sheet 0.80 mm thick plain black in steel gates and similar works, cut to size, holes punched, including round headed screws, rivets and fixed to steel framing with plain 40mm lap joints with riveted or welded including bending or turning up, mitred angles, etc. as required, complete all as specified and directed.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

-Ditto- all as per item 35 above but one coat of synthetic enamel paint on old steel surfaces of any description complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B-2 (using 20 mm graded mechanically crushed stone aggregate) as in floor/pavement complete all as specified and directed.

M&L Forming Construction joint 30mm deep x 10mm wide with grade 'B' and filled with sealing compound complete all as specified and directed.

M/S Shanti Enterprises

SUBIR KUMAR ROY

Dev Enterprises

GHASI RAM SAHU