Conservation, Restoration and Redevelopment of Calve College Heritage School Building at Puducherry

Amount

Earthwork in excacavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Extra for every additional lift of 1.5m or part there of in excavation / banking excavated or stacked materials - all kindsof soil

Supplying chemical emulsion in sealed containers including delivery as specified- Chlorpyriphos / lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - tratment of soil under existing flooors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration -

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) - Treatment of existing masonry using chemical emulsion @ one litre per hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole - with chlorpyriphos / lindane E.C. 20% with 1% concentration

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete

Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters, butteresses plinth and string courses etc.

Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors, roofs, landings, balconies and access platform

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts.

Extra for additional height in centering , shuttering where ever required width adequate bracing , propping etc. including cost of de - shuttering and decentering at all levels , over a height of 3.5m, for every additional height of 1metre or part thereof (plan area to be measured) - Suspended floors, roofs, landing , beams and balconies (Plan area to be measured)

Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars (TISCON / VIZAG/ IISCO / SAIL / JSW) Fe - 415 or more

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete above plinth level - Thermo - Mechanically Treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more

Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating the rate includes cost of anticorrosive coating including cost of powder, sand blasting, cleaning , induction, heating , depreciation of machinery etc, wastage in cut length of bars, provision of wooden battens between rows of coated bars , cover to work bush pins / bar bending machines etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993

Providing and placing M30 grade cover block for RCC work all levels

Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS : 1838 , including cost of m primer , sealing compound in expansion joints

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete , improve workability without impairing strength and durability . Note:- Cement content considered in this item is @ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. - All work upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability. Note:- Cement content considered in this item is @330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. - All work above plinth level upto floor five level.

Add for using extra cement in the items of design mix over and above the specified cement content therein

Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) and finished smooth - White agaria mable stone

Providing wood work in frames of doors, windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vengai wood - 35 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood

Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S.flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc

Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing ISI marked powder coating pressed Parliamentary hinges with necessary screws etc , complete - 150X125X 27X 2.80mm

Providing and fixing ISI marked oxidised M.S.pressed Parliamentary hinges with necessary screws etc , complete - 75 X 100X 20 X 2.24 mm

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 300x10mm

Providing and fixing aluminium tower bolts each 81.46 , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete - 150 x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with ecessary screws etc. complete. - Twin rubber stopper

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_ 1mm ), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification - Extruded section profile size 42 x 50 mm

Providing and fixing to existing door frames - 30 mm thick factory made Polyvinyl Chloride (PVC) door shutters made of styles and rails of a uPVC hollow section of size 60 x 30 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S.tube of size 25x20 mm and 1mm (+- 0.1mm) wall thickness.The lock rail made up of 'H' section , a uPVC hollow section of size 100 x 30 mm and 2 mm (+-0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness. They panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers, complete as per manufacturer's specification

Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete.

Providing and fixing glass strips in joints of terrazo / cement concrete floors - 40mm wide and 4mm thick

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand) : 25 mm thick

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 300x450 mm

Providing and laying rectified ceramic rustic / matt finish floor tiles 300 x 300 mm or more ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS:15622 of approved make ( Somany / Nitco) in all colours shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete

Providing and laying 22 mm thick factory made pre-polished cement concrete flooring tiles of required colour and design over 20 mm thick cement mortar 1:4 (1 cement : 4 sand ) and jointed with cement slurry mixed with an admixture of pigment to match the shade of the tile - (Endura \ Ultra \ Dazzle \ Technic)

Providing and fixing PVC corner beading of required size to suit the thickness of the wall tile at the corner joints of dado works

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sq.m impregnated with a coat of coarse sand at 60cudm per 10 sq.m including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete - with residual type petroleum bitumen of grade VG-10

Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 75mm diameter

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter.

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee without door -110x110x110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4coarse sand) and making good the wall etc.,complete - 75mm

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm

12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:5 (1 cement : 5 fine sand)

6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof

Extra for plastering done on moulding cornices or architraves including neat finish to line and level: in two coat

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New (Two or more coats applied @ 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm)

Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacure

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete - on steel work

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete - on concretel work

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge - In lime mortar

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above

Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres - of sectional area 40 square centimetres and above

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in - R.S.joists

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles 10mm to 25mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead - for thickness of tiles above 25 mm and upto 40 mm

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of - G.S.sheet

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of - Asbestos sheet

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing wall black board with cement mortar 1:3 (1 cement : 3 sand) finishing with a floating coat of neat cement and black pigment mixed in the proportion 1:2 (one cement : two black pigment ) and applying one coat of black board paint including 20mm thick cement plaster band 50mm wide in cement mortar 1:3 (1 cement :3 sand)

Supplying fixing and commisioning of Suguna / Texmo / Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete .

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - white Vitreous China wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing - rectangular shape 453 x 357 mm

Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 20mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete ( Internal work exposed on wall ) - 32mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 40mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete ( Internal work exposed on wall ) - 50mm nominal outer dia pipes

Providing and fixing brass stop cock of approved quality - 20mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete - 20mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing PTMT grating of approved quality and colour - rectangular type with openable cirucular lid - 150mm nominal size square 100mm diametre of the inner hinged round grating

Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion - Single tee without door - 110 x110x110mm

Providing and fixing on wall face / column face unplasticised - PVC mould fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend 110 mm

Providing and fixing on wall face / column face unplasticised - PVC mould fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 - 1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend with door 110 mm

Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes (type B) conforming to IS :13592 - 1992 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single socketed pipes 75mm diameter

Providing and fixing on wall / column face unplasticisd - PVC moulded fittings/ accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single tee without door - 75x75x75mm

Providing and fixing on wall / column face unplasticisd - PVC moulded fittings/ accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Bend 75 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness

Providing and injecting approved grout in proportion recommended by the manufacturers into cracks / honey-comb area of concrete / masonry by suitable gun / pump at required pressure including cutting of Nipples after curing etc comlete (The payment shall be made on the basis of actual weight of approved grout injected) - Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete / RCC work

Providing and fixing water meter make (DASMESH) and stop cock in 25mm G.I pipe line including cutting and threading the pipe, making long screws, bolts, nuts, rubber insertions and testing the water meter etc. complete.

Providing and fixing in position UPVC moulded elbow (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 110mm dia

Providing and fixing in position UPVC moulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 75mm dia

Providing and Laying Madras Terrace Roofing ( 15cm thick) with locally available flat bricks of class designation 35(kindikal & achu kal) in traditional technique with experienced masons in lime mortar,using best lime and sand (1lime:2 sand & well ground in a pan mixer cum grinder with kadukai extract and jaggery solution and cured for 14 days) true to line and level at all heights and location including all scaffolding material,labour and sundries complete work including curing. Appl.No.11/PW/SEI/AE(P)-II/F.No. 221/ 2018-19/534 dt.17-04-2018

Supplying and fixing of Cast Iron Gate with roller arrangement with curved track as per design and drawing. The rate to includes material, labour and overhead charges, the work should be done as per direction of Engineer - in - charge. Appl.No.256/PW/SEI/AE(P)-II/F.No. 221/ 2017-18/1268 dt.20-10-2017

Supplying and fixing of Cast Iron compound wall fencing as per design and drawing, Each bay consists of four horizontal member each of 30 kg weight and horizontal rods of alternate small and big rods of 25mm dia (+ or – 2 mm thickness variation) and 10 nos of small rod and 9 nos of big rod and the centre rod will be drilled into the wall and each bay is supported by compound wall intermediate pillar. The rate includes material, labour for fixing and overhead charges, the work should be done as per direction of Engineer - in - charge-Appl.No.256/PW/SEI/AE(P)-II/F.No. 221/ 2017-18/1268 dt.20-10-2017

Filling in Plinth or trenches,under floors, in areas with Quarry dust including watering, ramming, consolidating and dressing, cost and conveyance of all materials, labour charges, lead, lift etc complete at all levels as directed by the Engineering-in-charge.Non PSR approved by SE-I vide No.396/PW/SEI/ AE(P)-II/ F.No.525/2016-17. dt.28-12-2016

Disposal of building rubbish and unserviceable dismantled materials upto 5Km radius the rate include incidental charges and loading for transportation by mechanical means. Rate approved by SE-I vide Lr.No. 183/ PW/SE-I/AE(P)-II/F.No.309/2018-19/91 dt. 22.01.2019

Removal of sludge from the septic tank and disposal of the same through the sewage tanker in safe location with an average lead of 10KM. The rate to include the cost of labour charge for removing and relaying of cover slab laid over the septic tank, mixing of Ferro Sulphate into the septic tank for through mechanical device and disposal of the same including hire charge for sewage tanker etc., complete as directed by the Engineer-in charge. Rate approved by SE-II vide Lr.No. 6112/ PW/SE-II/AE(P)-6/SB-150/2016-17/1945 dt. 24.11.16

Supplying and fixing of C.I Manhole cover with frame to a size of 600mm x 600mm with G.I Coating of approved quality and hinges with locaking arrangements etc., complete as directed by the Engineer-in-charge. Rate approved vide Lr.No. 196/ PW/SE-I/AE (P) I/F.No.300/14-15 dt.10.07.2014

Providing and fixing Anodised aluminium minimum anodic coating of grade AC15) 4 blade adjustable louvers of required pattern/design over the existing ventilator frame with aluyminium screws and including fixing of glass panes (but excluding the cost of glass panes which will be paid seperately (Rate approved vide T.S.No.17/PW/CE/2014-15)

Providing and fixing PVC 110mm dia terminal guard - Vent Cowl etc., complete as directed by the Engineer-in-charge. Rate approved by SE-I vide Lr.No. 560/ PW/SE-I/ AE(P)-II/ F.No. 221/2014-15/ dt.13.01.2015

Providing and fixing 40mm dia UPVC union of approved quality. Rate approved by SE-I vide Lr.No. PW/SE-I/ W/AE(P)-II/ F.No. 221/ 2012-13/ dt. 23.07.2012

Brickwork in lime mortar using best quality local lime, with best quality burnt bricks of class designation 35 in 1:2 lime mortar(1 lime :2 sand & well ground in a pan mixer cum grinder with kadukai extract and jaggery solution and cured for 14 days), including the cost of labour, material and overhead charges, complete work (including provision of vent slots for timber beams and rafters where applicable). Appl.No.11/PW/SEI/AE(P)-II/F.No. 221/ 2018-19/534 dt.17-04-2018

Providing and laying 45 x 45cm grey granite slab of thickness 3cm in the pavements top surface flame finished with neat edges, 1cm wide recessed cement pointing, laid over 2cm thick cement mortar 1:4(1 cement :4 sand)(Rate approved by SE-I vide No:244 /PW/SEI /AE(P)II /F.No. 221/2017-18/1226.)dt:09-10-17

Hire charges for providing support to the heritage building ceiling druing the process of replacing the wooden rafters/beams with new wooden rafters/beams using 50mm dia M.S.adjustable jackies to an extended length not less than 5.50m and using wooden planks in position etc., complete as directed by the Engineer-in-charge. Rate approved by SE-I vide Lr.No. 47/ PW/SE-I/AE(P)-I/F.No.CB-336 2016-17 dt. 20.06.2016

Supplying and fixing of double groove approved mangalore tiles,as per standard specification rate to include tying of edge tiles with 18 gauge copper wire and brass screw as per direction of engineer in charge.(Appd by 251/PW/SEI/AE(P)-II/F.No.221/2017-18/1253.dt.16/10/2017

Supplying and fixing of double groove approved mangalore ridge tiles,as per standard specification and including all scaffolding, labour and sundries complete work including tying of edge tiles with 18 gauge copper wire as per direction of Engineer in charge. Appd by 251/PW/SEI/AE(P)- II/F.No.221/2017-18/1253.dt.16/10/2017

Providing and fixing 3 lined dressed granite brackets (45x15x10cm),sunk and moulded as per drawings,as support for thewooden beams.The rate are inclusive of materials , labour, civil works, scaffolding, etc, complete as per Engineer-in-charge. APPROVED BY - No128/PW/SE-I/AE(P)-I/F.CB330/2015-16

Supplying of M.S square rod 40mm x 40mm in size for holding wooden wall plate as per detailed drawing rate to include the cost of scaffolding, cutting, bending placing and welding and fixing the wall in positionwith 1:1.5:3 Cement concrete and two coat of powder coat over a base approved primer -Large size.-Appd by 319/PW/SEI/AE(P)-II F.No.221/2017-18/1521 dt.14-12-17.

Removing the existing wood paint and scrapping the wood surface by using machine and manual with proper tools. To ensure the surface will be smooth and free from deposits, dust etc., complete as directed by Engineer-in-charge.

Repairing ornamental plaster works 35 to 40mm thick to match with the existing design as per detailed drawing. Using composite design mix lime plaster 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder plastered with trowell smooth finishing for verandah circular pillar capital. The rate including cost of materials labour, GST and CP etc., complete

Repairing ornamental plaster work 35 to 40mm thick to match with the existing design as per detailed drawing. Using composite design mix lime plaster 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder plastered with trowell smooth finishing for verandah circular pillar base. The rate including cost of materials labour, GST and CP etc .,complete

Renovation of Masonary "Elephant statue" as per the existing size and shape, plastering in cement mortar 1:4 (1cement : 4 sand) at an average thickness of 15mm in trowel finish including dismantling, materials, labour, scaffolding etc., complete as directed by the Engineer-in-charge

Providing and Making Ornamental cornice work including arch as per the existing size (as mentioned in the detailed drawing) and shape plastering in Lime Mortar 1:2 (1Lime: 2sand) at an average thickness of 15mm in trowel finish including dismantling, material, labour, scaffolding etc., complete as directed by the Engineer-in-charge-(Inside of Outer corridor)

Controlled Removing & Re-setting the existing granite slab laid on steps using cement mortar 1:3 of 20mm thick with neat pointing in C.M.1:3 as per earlier laying type as directed by Engineer-in-charge. The rate including labour, material, finishing etc., complete

Supporting Madras terrace roof including strutting , propping to the existing ceiling at all height during the process of replacing of wooden rafters/dismantling the existing roof with steel props(@ 0.60m c/c) and wooden runner (or) planks and removal of props for - Suspended floors and roofs. The rate including hire charges for materials conveying etc.,The payment will be made once irrespective of duration of supporting with props to complete the job.( The supporting system should withstand the short load and vibratory load resulting because of demolition carriedout on the terrace above the floor which is supported)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters of outer frame of 30-40mm thick and inner shutter of 25-35mm thick to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the detailed drawing & as per the direction of Engineer-in-charge.

Taking out existing wooden window shutter, repair by cutting, painting etc. and refixing of repaired door shutters of outer frame of 30-35mm thick and inner shutter of 20-35mm thick to existing window frames, including replacement of hinges with screws, etc. as required, all complete as per the detailed drawing as directed by Engineer-in-charge.

Providing and fixing MS kodali keel (Hinges) of 300mm height One end fixed in to the wall with cement concrete 1:2:4 and other end to the door as per the detailed drawing given.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 1500x12mm

Plastering the existing Circular Pillar for a height of 5m with 35 to 40mm(nominal) thick in two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder including labour, materials, curing etc., complete work as per specifications and detailed drawing as directed by Engineer-in-charge

Providing, chipping and clearing the plastering surface of existing Compound wall Octagonal Pillar and replastering the same with 35 to 40mm ( nominal ) thick in two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder . Plastered with trowell smooth finishing including mouldings and cornice works. Compound wall Octagonal Pillar of 2.67m height and 0.80m over all width. In octagon shape each face having 20cm width for a height of 1.75m. The pillar having top and base with mouldings, cornice etc as per detailed drawing including necessary scaffolding, labour, materials etc., complete work as per specifications and detailed drawing as directed by Engineer-in-charge

Providing , chipping and clearing the plastering surface of existing Compound wall Gate Pillar and replastering the same with 35 to 40mm ( nominal ) thick two layers with using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder. Plastered with trowell smooth finishing including mouldings and cornice works. Compound wall Gate Pillar of 3.16m height and 1.18m over all width having mouldings,cornice etc as per detailed drawing including necessary scaffolding, labour, materials, curing etc., complete work as per specifications and detailed drawing as directed by Engineer-in-charge

Providing and making square shaped horizantal groove (sunk band) on the allround outerwalls in G.Floor above 15cm from floor lvl of size 15mm x 15mm finished with using Composite design mix 1:2 as per architectural drawing as directed by Engineer-in-charge.

Providing and fixing at all level Precast reinforced " Self Compacting Concrete " rafters for retrofitting work of Jacking operation for arches, arch ribs, columns, beams haunches including the cost of centering, shuttering, finishing but excluding the cost of reinforcement with design mix of self compacting concrete as follows - Cement 500kg/cum, sand 700kg/cum, silicafume 75kg/cim, quartz powder 125kg/cum, plasticiser (supaflo PC 766) 6 lit/cum, HBG metal 10mm size @ 690 kg/cum and water 180 lit/cum all as directed by the Engineer-in-charge.

Providing reinforced " Self Compacting Concrete " at all level in beams, suspended floors lintels, bands, plain window sills, staircase at all level excluding the cost of centering, shuttering, finishing and reinforcement with composite design mix as follows - Cement 500kg/cum, sand 700kg /cum, plasticizer 75kg/cum, quartz powder 125kg/cum, plastizer 6 lit/cum, HBG metal 10mm size @ 690 kg/cum and water 180 lit/cum all as directed by the Engineer-in-charge.

Providing and laying pressed clay tiles of size 250x250mm (as per approved pattern 18mm nominal thickness as approved size) on roof finished with composite mix,laid over a bed of 20mm thick composite mix mortar as follows - (Cement (OPC) 4 parts, silicafume 1 part, lime 2 parts) 2 part fine M.Sand and add Airent admixture 100ml mixed with the required quantity of water per 50 kg. of powder.

Providing and laying composite design mix lime concrete terracing on roofs of required thickness laid to fall with 20mm nomional size brick aggregate with design mix as follows - Lime 1 part, Quarry dust 2 part, surkhi 4 parts and 3 kg silicafume for every 50 kg hydrated lime including rounding of junction with parapet wall complete.

Providing and laying composite design mix lime concrete in walls, wall (any thickness) including attached pilasters columns, piers, parapet coping, bed blocks etc upto floor five level excluding the cost of centering, shuttering and finishing composite mix as follows - lime 1 part Quarry dust 2 part, surkhi 4 parts and 3 kg silicafume for every 50 kg hydrated lime

Plastering in ceiling 15mm thick at all height in composite design mix 1:2 as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) fine M -sand 2 part and airent admixture 100 ml / 50 kg of powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge

Plastering the walls 35 to 40mm thick at all height using Composite design mix 1:2 in two coats under layer 20mm thick plaster and top layer 15 to 20mm thick plaster of the composite design mix as follows - (Cement (OPC) 1 part, silicafume 1 part, lime 6 part) Fine M. Sand 2 part and airent admixture 100 ml for 50 kg powder including necessary scaffolding, labour, materials, curing etc., complete work as per specifications as directed by Engineer-in-charge

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in M25 grade design mix jolly as per given detailed drawing in Parapet wall , windows sills etc. including finishing in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering , shuttering but excluding the cost of reinforcement.

Providing and fixing 15mm thick eaves board of 20 cm height in Padauk wood planks as per the detailed drawing. The rate to include the cost of all materials labour charges for hoisting , fixing the board in position to the wooden rafters drilling holes and fixing with screws to the alignment , scaffolding, applying wood preservatives, etc. complete. As directed by the Engineer in charge.

Providing and fixing specified wood frame with wooden rafters / battens for sun shade including hoisting fixing in position to the walls / granite bracket as well as to the MS brackets provided for the wooden rafters by drilling necessary holes to fixing with screws, rawl plugs, applying wood preservative, scaffolding all as per the detailed drawing as directed by the Engineer in charge, but excluding the cost of wood.

18mm thick and 20mm wide moulded Lime mortar (1:2) band (Door & Window) in two coats under layer 12mm thick with composite nortar (1:2) including 6mm thick finished coat

Wiring or light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C (For Light Points Only)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required. (For Light Points Only)

Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - Group C (For Light Points Only)

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 1.5 sq.mm + 1 x 1.5 sq.mm earth. (For Fan Points)

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 4 sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 6 sq.mm + 1 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 2 X 10 sq.mm + 1 x 6 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 6 sq.mm + 2 x 6 sq.mm earth wire (If Required)

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required - 4 X 10 sq.mm + 2 x 6 sq.mm earth wire (If Required)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required - 32mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required - 25 mm

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connection etc as required.

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 3 module (100mm x 75mm)

Supplying and fixing following size / modules, GI boxalongwith modular base & cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 6 module (200 mm x 75 mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 8 module (125 mm x 125 mm)

Supplying and fixing following size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required - 12 module (125 mm x 125 mm)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 15/16 A switch

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc .as

Supply of 4 x 16sqmm PVC sheathed armoured aluminium U.G cable - 1.1 KV grade. Make:Finolex/Polycab

Supply of 4C x 25 sqmm PVC sheathed armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab

Supply of 4C x 50 sqmm PVC sheathed armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X25 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X50 sq.mm (35 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm

Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I.bolts & nuts, etc .as required - 150 mm width x 50 mm depth x 1.6mm thickness

Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I.bolts & nuts, etc .as required - 300 mm width x 50 mm depth x

Supplying and installing following size of perforated Hot dipped galvanised iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc.as required - 150 mm width x 50 mm depth x 1.6 mm thickness

Supplying and installing following size of perforated Hot dipped galvanised iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc.as required - 300 mm width x 50 mm depth x 1.6 mm thickness

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required - 100mm Dia

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required

Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc . as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface / recessed steel / PVC conduit as required - two pair

Supply, installation, testing and commissioning of 415V metering panel board fabricated with 14G CRCA sheet steel, powder coated with siemens gray (RAL7032 IS-5) after seven tank process, complete with aluminium bus bars (the clearence shall not less than 25 mm for phase-phase and 19mm for phase-neutral/earth), 3.15mm sheet steel or 40x40x6mm MS angle for load bearing members, lifting hooks, MS base frame of 75mm height incomers and outgoing switchgear as below. The item including cost of supply and fixing of 3-phase energy meters, necessary sealing arrangements, 25x3mm GI earthing throughout the bottom length, 6 sq.mm FRLS copper wire inter connections for compartment earthing, complete copper control wiring with crimping type ferrules, copper lugs, proper engravation sheet to be fixed on each outgoing etc. Also the cost inclusive of minor civil works and providing necessary, support structure/frames with painting as required for erection. All complete as per specifications, drawing and/or as required by CEA/PED. The contractor shall submit general arrangement & control wiring drawings and get approval from site Engineer/Consultant before commence the fabrication works. Note: panels costing should be as per sld & with respect to PED standards Metering Panel-1 1 Sets each comprising of: a) 100A TPN Fuse cut outs with neutral link. b) Provision for Three phase Energy meter as per PED requirement. c) 100A FP MCB (C - curve 10KA)

MAIN PANEL Incomer : 100A 4P on-load manual change over switch with control MCB's, MFn meter and phase indications etc. - 1 No. 100A FP MCCB - 1 No Outgoings : a) 63A TPN MCB (C - curve 10KA) - 5 Nos b) 40A TPN MCB (C - curve 10KA) - 5 Nos

UPS SB Incomer : 63A FP MCB - 1 No Outgoings : a) 40A DP MCB (C - curve 10KA) - 6 Nos b) 32A DP MCB (C - curve 10KA) - 2 Nos

Supplying and drawing of 10 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 20 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 100 Pair, FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing of 10-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply and fixing of 20-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply and fixing of 100-pair telephone Krone type junction boxe enclosed in MS box with hinged cover with lock & key arrangements, all complete as per specifications, drawings and / or as directed by the Engineer.

Supply, installation, testing and commissioning of IPBAX system of 100 lines with required operator console, port, distribution frames etc., The rate shall include all allied and implied items for complete commissioning of the system. The incoming P&T line shall be for 4 nos. Make: NEC / Sintal.

DATA NETWORKING & CAMERA Supply and laying of CAT 6 UTP cable for voice network complete with all accessories, wiring terminations, connected civil works, rough plastering etc. Make: D link

SPEAKER Supply & laying of 2 core speaker twin twisted cable of size 70/36mm in PVC conduits including bends, junction boxes with necessary clampings and required accessories.

DISTRIBUTION BOARD Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, Interconnections, powder painted including earthing etc. as required (but without MCB / RCCB / Isolator ) 6way (4+18), double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way (4+24), double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 16 way, double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 12 way, double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB disribution board, 240 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) - 8 way,double door

Supplying and fixing Cable End Box (loose wire box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess,complete with testing and commissioning etc.as required. For 6 way, double door TPN MCB DB

Supplying and fixing Cable End Box (loose wire box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess,complete with testing and commissioning etc.as required. For 4 way, double door TPN MCB DB

Supplying and fixing TP sheet steel enclosure on surface / recess along with 16/25/32 A, 415 V "C" curve TP MCB complete with connections, testing and commissioning etc as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Single Pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required - 25 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required - 40 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc as required - 63 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 40 A

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required - 63 A

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc.as required

Supplying of 1200mm sweep double ball bearing ceiling fan Make: Almonard/Usha

Stepped type Modular Fan regulator (2 module)

3mm thick mica plate for fan hook box (L.M.R)

Concealed type ceiling fan metal hook. (L.M.R)

Supplying and fixing extra down rod of 10 cm length G.I.pipe, 15 mm dia, heavy gauge including painting etc . As required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Installation testing and commissioning of ceiling fan/wall mounting fan and wiring the down rod of standard length .(upto 30cm) with 14/.86mm Plastic insulated twisted Copper wire including earthing as required:

Supply of 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,commissioning etc. as required - Upto 450 mm sweep

Installation, testing and commissioning of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS / CFL /LED lamps per fitting. Complete with all accessories including connections etc as required.

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - TV antenna socket outlet.

LIGHT FIXTURES Fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required.

Supply and Fixting of 20W LED tube light fitting Make: Philips / Bajaj / Benio

Supplying and fixing of 230V, 1 x 18W LED wall mounted light fitting with suitable 18W LED lamp and necessary fixing accessories as required. Make: Philips/Bajaj

Supplying and fixing of 1 x 10 LED 2' Washbasin light fittings with suitable 10W LED lamp and necessary fixing accessories as required. Make: Philips/Bajaj

Supplying and fixing of 230V, 1 x 20W LED Wall bracket mounted type light fitting with suitable 20W LED lamp and necessary fixing accessories as required. Make: Philips/Bajaj

TELEPHONE Supplying and fixing RJ 11 modular type Telephone outlet and modular plate in cadmium / GI plated MS box including making connections etc as required. Make: MK / Crabtree

DATA NETWORKING Supplying and fixing Data socket outlet modular type and modular plate in cadmium / GI plated MS box including making connections etc as required. Make: MK / Crabtree

Supply, installation, testing and commissioning of 8 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink)

Supply, installation, testing and commissioning of 16 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink)

Supply, installation, testing and commissioning of 24 port Data switches with rack, the rate shall be inclusive of all required civil works. (Make: Netgear / Digilink)

Supply of wall Mounted network rack - 9U door of glass, completely covered and have security lockers, proper ventilated with one fan one cable manager, power distribution units of 6nos (5A) sockets with surge protection, mounting accessories and 5A top Ventilation switch.

Installation of wall Mounted network rack - 9U door of glass, complety covered and have security lockes, proper ventilated with one fan one cable manager, power distribution units of 6nos(5A) sockets with surge preotection, mounting accessories and 5A top Ventilation switch.

Supply and laying of HDMI Cables with 25mm pvc conduit with all accessories - 5Mtrs

Supply and laying of HDMI Cables with 25mm pvc conduit with all accessories - 20Mtrs

Supply and laying of HDMI Cables with 25mm pvc conduit with all accessories - 30Mtrs

Supply and fixing of HDMI cable - 3 Mtrs.

Supply and fixing of VGA cable - 3 Mtrs.

Supply and fixing of Wireless Mouse

Supply and fixing of NT USB 2.0 1.8Mtrs.

CAMERA Supplying and installing Wall or ceiling mounted indoor type Fixed Dome IP Camera with 1/3” 2MP PS CMOS Image Sensor 2MP@25/30fps, IR Range of 20 Mtrs,. The items inclluding necessary fixing accessories.

Supply, fixing and termination of high quality rack mounted type patch panel with one number of 16 port POE network switch, fixing frames, links and interconnections, necessary accessories etc., all complete as per specifications, drawings and / or as directed by the Engineer.

Supply, fixing and termination of high quality rack mounted type patch panel with one number of 24 port POE network switch, fixing frames, links and interconnections, necessary accessories etc., all complete as per specifications, drawings and / or as directed by the Engineer.

Supply of wall Mounted network rack - 9U door of glass, completely covered and have security lockers, proper ventilated with one fan one cable manager, power distribution units of 6nos (5A) sockets with surge protection, mounting accessories and 5A top Ventilation switch.

Installation of wall Mounted network rack - 9U door of glass, complety covered and have security lockes, proper ventilated with one fan one cable manager, power distribution units of 6nos(5A) sockets with surge preotection, mounting accessories and 5A top Ventilation switch.

Supplying and installing of 64 Channel Network Video Recorder with Max 320Mbps incoming bandwidth Smart H.265+/H.265/ Smart H.264+/H.264/ MJPEG Up to 12MP resolution preview and playback Support 8 SATA HDDs up to 10TB Each, 4 USB (2 USB3.0, 2USB2.0) 2 HDMI / 2VGA simultaneous video output Support Multi-brand network cameras Support RAID 0/1/5/10 Mobile Software: iCMOB, gCMOB CMS Software: KVMS Pro. The items including supply of 4TB hard disk, connectors, pins and providing complete configuration etc.

Supplying and installing of Power Supply Unit along with necessary Battery backup, suitable for 1 nos. 64 channel network video recorder system.

Supplying and installing of 43" LED colour monitor.

SPEAKER Supplying and installing of 10 Watts, Wall/ceiling mounted type high quality metallic grill type 100V line speaker with built-in line matching transformer and necessary mounting boxes and fixing accessories.

Supply of 500W Mixer - amplifier, Power supply : AC 240V 50/60HZ/DC-36V Rated power : 500W, Tone controls bass - +/- 10dB at 100HZ. Treble - +/- 10dB at 10KHZ, Input wire : 6 x Mic 0.7mV/600 ohms bal TRS. 2-Aux 100mV/10Kohms, RCA Pair, 1xLine 1V/10Kohms, bal TRS.

Supply of Cordless microphone Hand held. Receiver: Single channel Non-Diversity. Frequency Response: 50Hz to 15KHz, Polar Pattern : Cardioid, Output: Unbalance 1/4" jack Power req: Mic 9V Alkaline Battery. Receiver: 240V AC 50HZ for AC adaptor supplied with the set. Make: Studiomaster. Model: ER11/EM11 (Handheld).

Supplying and installing of 230V, CD/MP3/DVD Player with necessary power chord.

Supply and erection of 3 phase 415 V, 15KVA in 3P out online UPS with suitable BCB (Battery circuit breaker),filters, 20Nos. 12V 42Ah SMF batteries with 30 Minutes backup with necessary fizing accessories etc. Make Numeric/Consul/Luminous Battery make Exide/Quanta

G.D.builders

M/s. Murali and Bros

JAHIR HUSSAIN

Jenomaranbuilders(p)Ltd

MUTHUSWAMYCONSTRUCTION