Construction of Two Class room Building in First Floor at PUMS at Murugankudi Pachayat

Pre-Measurement for pressed tiles & Weathering course for dismantling and remove for the site etc complete.,

Pre-Measurement for Existing brick work is parapet for dismantling and remove for the site etc complete.,

Pre-Measurement for RCC Column for dismantling and remove for the site etc complete.,

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.

Filling with good M sand including cost and conveyance of all material to site and all labour charges etc complete,

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Basement

Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Supplying and errecting for centering sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Towards cost and supply of steel door and window including cost and coinveyance of all labour charges etc complete.,

Towards cost and supply of steel door and window including cost and coinveyance of all labour charges etc complete.,

Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Granolithic floor finish with C.M. 1: 2:4 mix to 40mm thick using 10 to 12 mm chips including cost and conveyance and all labour charges etc,.

Plastering with cement mortar 1:4, 20mm thick including cost and conveyance and all labour charges etc.

Floor finishing with Kotta Stone of size 0.60 x 0.60m including cost and conveyance of all labour charges etc completed.,

Light point

Light point

Tube Light fitting

Fan point

Plug point

Distembering using two coats of Distember from aÁoved company including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm(Inner)

Painting two coat of new iron works such as doors windows, ventilator paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix Emulsion paint of approved colour over plastered wall including cost and conveyance and all labour charges etc.

Providing for painting for black board

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of .00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is nclusive of the charges for cutting,bending, welding, grinding, polishing, onveyance,electrical charges, etc. complete

Providing and fixing of Weldmesh including of all labour charges

Providing and fixing of Weldmesh frame including of all labour charges

Providing and Applying of bala painting including of all labour charges

Provision for nameboard

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}