Restoration of damages of PHQ building Srinagar (Damages due to Gusty Winds (under Account Head Minor Civil and Electrical works in Demand 51 Police.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing of precoated galvanized Iron profile sheets of approved design pattern and colour of 0.50mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epxy primer on both side of the sheet an polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and shuold be supplied in single length upto 12 metre or as desired by EIC. the sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM seal complete.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)

Providing and fixing of 5mm thick ordinary Glass panes in openings of aluminium windows etc including aluminium beeding etc all complete Job.

Providing and fixing of UV stabilized polycarbonate glass sheet roofing upto any pitch ioncluidng fixing with polymer coatred 'J' or 'L' hooks, bolts and nuts 8mm dia G I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactures out of 2400 nTEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 PSI and hot cured. they shall be of uniform pigmentaqtion and thickness without air pockets 2mm thick flat.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Supplying, fixing and commissioning of Arrylic Fabric soft UV resistant extendable motorized sunshade of required width and length including all fixtures involved etc all complete Job.

Supply/ fixing/Installation of 3D Alphabetics Acrylic Board of size 10'x 2'-6" with Departmental Logo. The board shall made with A Grade version Acrylic material with proper silicon joints etc complete Job.

Please Enable Macros to View BoQ information