Day to Day Repairs to Flooring tilling Plumbing Sanitary Fitting Roofing Sheets and other connected items under the AOR of AGE BR I in GE Gomantak Vasco

Amount

M&L for attending to petty repair job to plumbing/ internal water supply works such as repair to leaking bib taps/ pillar taps/ mixers/ stop cocks/ angle valves/ float valves/ concealed stop cock etc. by tightening and providing washer, disc, spindle or any other minor accessories, repair to float valves, flushing cistern by minor adjustments, leaking water supply lines by tightening the GI fittings/PVC fittings or refixing water supply or sanitary fixtures using thread/ Teflon tapes with and including small GI fittings such as GI/PVC elbow, socket, union as required at site to make the system functional complete as specified and directed. [Note : (i) Each repair job shall be measured as one job. (ii) Job involving replacement of taps/ valves shall not be measured under this item. (iii) Spindle repaired/replaced measured and paid sepereately

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern moulded from virgin poly propylene, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC and PVC connection 15 mm bore, 600 mm long with 2 Nos. PTMT nuts complete all as specified and directed

S&F in repair vitreous china wash hand basin white flat back size 450x 300 mm including two Nos angle iron brackets including 32mm dia brass CP waste coupling, waste pipe and 450 mm long, PVC connection 15 mm bore, 600 mm long with 2 Nos. PTMT nuts complete all as specified and directed

S&F in repair Viterous China wash down water closet pan (pedestal pattern), white including fixing bolts, and Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china urinals half stall type complete including urinal spreader pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore pipes steel tubing and connections complete all as specified and directed.

Taking up or down 25 mm bore pipes steel tubing and connections complete all as specified and directed.

Taking up or down 40 or 50 mm bore pipes steel tubing and connections complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 40 or 50 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing CPVC pipes 16 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, fixing, laying & testing CPVC pipes 20 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, fixing, laying & testing CPVC pipes 25 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, fixing, laying & testing CPVC pipes 40 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F in repair Bib Tap 15mm dia, Standard of PTMT, any Colour, high pressure screwed for Iron Pipe minimum weight not less than 90 Grams complete all as specified and as directed.

S&F in repair pillar Tap 15mm dia, Standard of PTMT, any Colour, high pressure screwed for Iron Pipe minimum weight not less than 110 Grams complete all as specified and as directed.

S&F in repair angle valve 15mm dia, Standard of PTMT, any Colour, high pressure screwed for Iron Pipe minimum weight not less than 90 Grams complete all as specified and as directed.

S&F in repair 15 mm stop valves 15 mm with long shank and cup (concealed type), Standard of PTMT, any Colour, high pressure screwed for Iron Pipe minimum weight not less than 110 Grams complete all as specified and as directed.

S&F in repair PVC seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices complete all as specified and directed.

S&F in repair 15 mm bore gun metal gate valve with iron wheel head, class -II screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, class -II screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 25 mm bore gun metal gate valve with iron wheel head, class -II screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 40/50 mm bore gun metal gate valve with iron wheel head, class -II screwed both ends for iron pipe complete all as specified and directed.

S&F in repair PTMT waste coupling 32 mm dia (half or full threaded) minimum weight 45 gm fixed in WHB/sink/Urinal complete all as specified and directed.

S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair chromium plated brass shower rose 125 mm dia with swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.

S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 600 mm long between flanges fixed with rawl plug complete all as specified and directed.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position, fixed with tank nipple, union complete all as specified and directed.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position, fixed with tank nipple, union complete all as specified and directed.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, hoisted and fixed in Position, fixed with tank nipple, union complete all as specified and directed.

S&F in repairs stainless steel cockroach trap grating 125 mm dia with /without hole for drain pipe complete all as specified and directed.

S&F in repairs 20mm bore dia PTMT Nipple suitable for HDPE water tank (Minimum weight 45gms) all as directed.

S&F in repairs 25 mm bore dia PTMT Nipple suitable for HDPE water tank (Minimum weight 65gms) all as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

S&F in repair siphon set suitable for existing PVC flush tank complete all as specified and as directed.

S&F in repairs PVC flexible waste pipe, 32mm bore, 900mm long suitable for wash hand basin/ sink complete with adapter all as specified and directed.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Jaquar Cat part No. CON-021KN or equivalent in Nycer/Hindware/ Plumber

S&F in repair angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair two-in-one bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make: Jaquar Cat part No. CON-041KN or equivalent in Nycer/Hindware/ Plumber

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with minimum 1 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair brass chromium plated Soap dish complete all as directed. Make: Jaquar Cat part No. AQN-7731 or equivalent in Nycer/Hindware/ Plumber

Cleaning of terrace/ loft water storage tank /static water tank (RCC/PVC) (inside surface area) of any capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water, disinfecting with bleaching powder @ 0.5 gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba/waste complete as per direction Note :- If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

S&F in repair closing lid for PVC water storage tank of capacity exc. 250 Ltr but n.exc. 500 Ltr complete with hinges for securing to tank complete all as directed.

S&F in repair closing lid for PVC water storage tank of capacity exc. 500 Ltr but n.exc. 1000 Ltr complete with hinges for securing to tank complete all as directed.

S&F in repairs 25 mm diameter Ball brass valves high pressure with polythene float screwed for iron pipe or brass ferrule and fixed as specified.

S&F in repairs 20 mm diameter Ball brass valves high pressure with polythene float screwed for iron pipe or brass ferrule and fixed as specified.

S&F PVC mirror cabinet of size 350x450mm with hinged door covered with mirror, with brush holder, pouch holder, shelves etc. complete all as directed. Make PRAYAG Cat part No. 551 or equivalent in Commander/Polytuff

Supply only brass spindle for bib tap/ stop valve/ angle value / Gate Value or any other of any size complete all as directed.

M&L in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm GI pipes/PVC pipes complete all as specified and directed

M&L in repairs of 15mm bore Self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe/pvc pipe and fixed complete all as specified and directed

S&F in repairs stainless steel kitchen plate rack of size 31" x 36" x 10", made of 1 mm thick stainless steel sheet complete all as directed.

Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic digitally printed tiles of size 300 x 450 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for vitrified tiles, double charged, first quality 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for vitrified tiles, double charged, first quality 9 to 10 mm thick polished on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and mirror polishing with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix stone complete all as specified and directed.

M&L for 18-20mm thick Granite work of colour Ruby red/ Telephone black/ Jade black (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20 mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.

M&L for granite tiles of colour Ruby red/ Telephone black/ Jade black 18-20mm thick machine cut, in skirting/ dado laid over and including 10 mm thick backing coat in CM 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

S&F Machine cut cudappah stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding, rubbing and polishing as in shelve supported on wall complete all as specified and as directed.

Taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. and refixing in same opening, shutters of any description n. exc 1 sqm complete all as specified and directed.

Taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. and refixing in same opening, shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or stone masonry/ block masonary surface in cement mortar 1:6 (in patches also) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface or block masonary, 15 mm thick in two layers of 10 + 5 mm in CM 1:4, top layer of 5 mm thick mixed with integral water proofing compound as per manufacturer instructions finished the surface fair and even complete all as specified and directed. Note:- WPC shall be measured and paid seperately

M&L 5 mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coat of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in base course finished fair and even complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor etc. complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in benching, copings, over chajja, drain and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.), shelves etc. and similar works set in cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of Brick Work/ sone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for rubbing, polishing and waxing of existing surface of tandoor/ kota/ terrazzo tiles of any description (wherever needed) complete all as directed.

Removing of building materials etc. (other than spoil to a distance upto 1 Km) by truck or tractor with using of if necessary JCB machine and trolly load min 3.00 Cum each load of loose building material including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for filling the existing cracks on plastered surfaces of walls by using Dr. Fixit Crack-X Shrink free compound or equivalent incl preparation of surfaces before application by opening the cracks and cleaning off the dust, dirt etc. for ease of application of paste all as per manufacturer's instructions and making good surfaces all as directed.

Chipping of unsound/weak concrete material 20 mm average thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. complete with necessary scaffolding/ staging and disposal of debris for all lead and lifts complete all as directed.

Cleaning of reinforcement from rust from the reinforcing bars of dia upto 12mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry complete all as directed.

M&L for mixing and applying SBR polymer modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) 20 mm average thickness in three layers as per specifications and as directed. Note: Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument.

Cutting down the plants/ trees of girth n.exc. 15cm from roof tops/ sides of external walls of building, chajja, wall junctions & at junctions of rain water/ waste water pipes including taking out the roots entered into wall/ slab surfaces, making good surfaces with PCC 1:2:4 type B-0 or cement mortar (1:2) including repairing the GI/ CI/ PVC pipe joints which were affected due to cutting/ taking out process after applying suitable herbicide including making good the disturbed surfaces to match the adjoining surfaces complete with necessary scaffolding/ staging/ Jhula etc, with all necessary safety precautions complete all as directed and as specified.

Repairs to existing sunken floor by carring out the following courses :- (i) Demolition of sunken floor filling and removing / depositing the same at a distance n. exc. 250 m away from the outer edge of bldg complete all as directed

(ii) M&L for applying two coats of epoxy resin coating polymer modified coating to a thickness of 1 mm for each coat incl. preparation thoroughly without any traces of dirt or laitance as in sunken floors using NITOBOND Chemical First coat 1:2:3 (Nitobond 1 Ltrs : water 2 Ltrs : Cement 3 Kg) and NITOBOND Chemical second coat 1:3 (Nitobond 1 Ltrs : Cement 3 Kg) complete all as specified and as directed.

(iii) M&L 15 mm thick protective plastering in CM 1:4 mixed with and including liquid water proofing compound @ 200 ml per bag of cement finished the surface fair and even complete all as specified and directed.

M&L for filling brick bats of gauge not exc. 63 mm as in sunken floor complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including 'P' or 'S' trap and connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls or in floors in clean or foul condition including clamps complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls or in floors in clean or foul condition including clamps complete all as specified and directed.

S&F PVC (SWR) reducer 110/75 mm bore with rubber ring complete all as specified and directed.

S&F PVC(SWR) junction 110 mm bore single (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with rubber ring complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore with rubber ring complete all as specified and directed.

S&F 50 mm bore single socketed high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or laid in floors etc. with all fittings such as ends elbow, union, bend, reducer etc., including taking down existing pipe of any description complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore with rubber ring complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore with rubber ring complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed.

M&L Jointing only cast iron pipes and fittings or AC pipes and fittings with PVC pipes with cement joints etc all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100 mm long (ISI marked) complete all as specified and directed.

S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed.

S&F 125 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.

S&F 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

Dismantling Plain or Corrugated Steel Sheeting of any gauge or similar pattern Roof Coverings complete all as specified and directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed.

S&F for PVC insulation panels10mm thick with EPS stuck to 1mm thick PVC sheet suitably placed in false ceiling to aluminium GI grid fixed with screw as per manufacturers instructions complete all as directed

S&F hangers 6 mm dia G.I (upto 1200 mm lenght) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 X 3 mm size 60 mm long complete all as specified

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm complete all as specified in clause No. 10.38 of SSR part-I and as directed.

SACHINENTERPRISES

Leela Enterprises

Paulraj Painters And Civil Engineering Contractors

JINTECH

M/S. NAVEEN ENGINEERING & CO