PROVISION OF TOILET BLOCK BESIDE BUILDING NUMBER P 707 AND OTHER SANCTIONED WORKS UNDER GE I GOS

Amount

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7mm thick on vertical surface such as dado / skiting / risers to steps etc set & joimnted in neat cement slurry and pointed in white or coloured cement to match yhe surface of tiles over & including rendering 10 mm thick in cement mortor1:4 complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

Taking up or down 15 mm bore pipe steel tubing and connections including cleaning for refixing or removal to store. Complete all as specified and directed

Taking up or down 20 mm bore pipe steel tubing and connections including cleaning for refixing or removal to store. Complete all as specified and directed

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified

S&F in repair Bib taps fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed

S&F in repair Chromium plated angu;lar stop cock for 15 mm bore complete all as specified and directed. Make - Jaquar CON-053KN

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed sharks and fly nuts screwed for iron pipes & fixed complete all as specified and directed.

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out/laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. Above starting point complete all as specified and directed.

S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed.

All as per Item No. 19 above but of size 32 mm OD.

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed.

All as per Item No. 21 above but of size 32 mm OD.

Supply and fixing Monoblock pump sets , electric driven ,Single phase suitable for suction and delavery line size 50x40 mm , 2 HP (1.5KW) complete fitting and testing ,alignment of motor , all as specified and directed.

Supply and fix in replacement of DOL starter for submersible pump set type MK-I and relay range 9-14 amps with contactor complete.

Supply and fixing 3 core copper flexible cable FRLS 2.5 Sqmm size, 1100 volts grade all as directed and specified by Engr-in-charge.

M & L in replacement and making connection of PP-R distribution branch with PP-R main of size (50 to 75 mm) by providing and fixing tee including cutting and making fusion joint etc as per required at site.

S&F Rotational polythylene water storage tank (Cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed.

M&L for Excavating in trenches in soft/ loose soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in chajja and the like complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, Flat, with fair finished surfaces complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (sqaure, rectangular or polygon) with fair finished surfaces complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Flat, with fair finished surfaces complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat, with fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as speified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Old size Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed..

M&L preparation of newly plastered surfaces and applying three coats of white wash but on ceiling complete all as specified and as directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces complete all as specified and directed.

M&L Machine cut kota stone slab flooring 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut kota stone slab flooring 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including rubbing and polishing complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand (all by weight) complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including properly cleaning & drying the concrete surfaces complete for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm

All as per item ser no. 65 above but for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.

All as per item ser no. 65 above but for laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.

All as per item ser no. 65 above but for applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets etc (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

Material and labour for One light point controlled by one 10amps switch, one way and point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per Item Ser No. 73 above but for one exhaust/ fan point controlled by one switch 10 amps, and one regulator.

All as per Item Ser No. 73 above but for one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per Item Ser No. 73 above but for one 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.75 & 76 above,but for one 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board and point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed

All as per Item Ser No. 77 above but One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing 10 watts LED Austra mirror smart light fitting one/two feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal complete all as specified and directed.Make :-Havells or equivalent make in Crompton/Philips

Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

Supply and fixed in repairs LED floof light light fitting of capacity 70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in Hagar/Schneider

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply only ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1200mm sweep. Min air delivery 225 CFM with service value 6.00 BEE,Star rated with brushless direct current motor complete all as specified and directed.Make:-Crompton Jura Prime or equivalent in Atomberg/Havells/ Orient as approved.

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

M & L for sub main wiring complete in repairs with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 16 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

M&L for Excavating in trenches in soft/ loose soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation, n exc 10 sqm in plan and getting out complete all as specified and directed.

M&L for Cement concrete Type D-2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in chajja and the like complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Flat, with fair finished surfaces complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat, with fair finished surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drawing SSR Part-II 2020 complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II 2020 complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm dia extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick tinted glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed.

S&F 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 5 mm thick sheet glass ordinary quality and gazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

S&F in vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests, CI sanitary connection socket to fit WC outlet (excluding flushing cistern and flush pipe) complete including provn of lime concrete bedding.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F Plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or alumnised hinging device complete all as specified & as directed.

S&F 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified & as directed.

S&F Angle Stop Valve 15 mm bore fancy type chromium plated with wall flange complete all as specified and directed.

S&F Hand shower (Health faucet) with 1 mtr long Easy flex tube in chrome finish & wall hook complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S&F Ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S&F PP-R globe or gate valves screwed both ends for PPR Pipes of 20 mm bore dia of pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F WHB under counter-type of size 560 x 430 x 195 mm oval shape including Couplings complete all as specified and directed.

S&F Bottle trap chromium plated for WHB as per approved quality all as per specified and directed.

S&F Vitreous china urinal partition white of size 310 x 700 mm complete all as specifeid and directed.

S&F PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement all as specified and directed.

S&F Sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S&F LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F Coloured Toilet paper holder, vitreous China, box type complete all as specified and directed.

S&F CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Bib taps fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.

S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Reinforced cement concrete (Design mix) M-30 (using 20 mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions (sqaure, rectangular or polygon) with fair finished surfaces complete all as specified and directed.

M&L Excavating over areas in soft/ loose soil , n exc 1.5 m deep and getting out complete all as specified & directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and pointed with grey pigment cement and pigments complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for foundation etc and getting out complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed

Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in bedding including haunching and packing under and against the side of salt galzed stone ware pipe 150mm bore, after they are laid and tested complete all as specified and as directed

Supply, laying, jointing and testing for 150mm bore reinforced concrete pipes,class NP3, laid in trenches jointed in CM 1:1 complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required in 150mm internal dia complete all as specified and directed.

M&L for providing Cement concrete type D2 1:4:8 (Using 40mm graded aggregate ) as in sub base, filling and mass-concrete complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate as in surface channels, drain complete all as specified and directed.

M&L for PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in coping incl weathering slightly rounded or chamfered angle and throating including necessary form work complete all as specified and directed.

M&L for 15mm thick rendering on surfaces on fair faces of brick work or concrete surfaces in CM 1:4 with WPC and finished the surface even & smooth with out using extra cement complete all as specified and directed.( WPC measured & paid separately)

Supply only integral water proofing compound (Powder).

M&L for 15mm thick rendering on surfaces on other than fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even & smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on surfaces on fair faces of brick work or concrete surfaces in CM 1:4 with WPC and finished the surface even & smooth with out using extra cement complete all as specified and directed.( WPC measured & paid separately)

Material and labour for providing pre-cast reinforced cement concrete of (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab set in CM (1:6) of manhole supported on walls complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut-to-length, bent-to-shape, required including cranking bending spirally, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L soakage well of size 1.20 mtr dia and 1.50 mtr depth with and including excavation in ordinary soil, foundation with PCC 1:3:6, Honey combed brick work in CM 1:4, brick work in CM 1:4, RCC slab cover in M-25 and filling with brick bats to suitable depth complete all as specified and as directed

M&L for 10 user on site RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

Material and labour for One light point controlled by one 10amps switch, one way point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed. (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per Item Ser no. 205 above but for one exhaust fan/fan point controlled by one switch .

All as per Item Ser no. 205 above but for one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per Item Ser no. 205 above but for one 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No.207& 208 above,but for One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board and for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed

All as per Item No. 209 above but for one 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in Hagar/Schneider

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/ABB/Havells or as approved make

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

M & L for sub main wiring complete in repairs with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without undulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per schedule of credit materials against contract agreement).

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

Material and labour for one light point controlled by one 10 Amps switch one way and point wiring and circuit wiring from distribution board to control switch boardwith 1.5 sqmm PVC insulated wires, FRLSH type complete incl suitable , ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 25 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed/surface(as per site) in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.20mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with 3mm putty and necessary distamber for smooth finishing complete all as specified and directed. (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height/places(incl stone bldgs) it shall be deemed in to included in quoted rate only.)

All as per item No. 243 above but for one fan point controlled by one 10 Amps switch and one regulator.

All as per item No. 243 above but for one exhaust fan point controlled by one 10 amps switch .

All as per item No. 243 above but for one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item No. 243 above but for one 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

All as per item No. 243 above but for one bell/buzzer point controlled by one bell push.

All as per item No. 243 above but for one light point controlled by two 2 way switches/bed switch point

All as per item No.246 & 247 above,but for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board and point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed.

All as per Item No. 250 above, but for one 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.246 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240Volts, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality, ISI marked, as approved type complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing 20 watts LED Austra mirror smart light fitting one/two feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fixing decorative LED 9 watt decorative, globe type,high quality ploycarbonate materials suitable for 9 watt LED lamp ,B22,220 Volts AC with high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHFOGBE1TZ1W035 or equivalent make in Crompton/Philips

Supply and fixing 12 watt LED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified Make :-Crompton/Havells/Philips

Supply and fixing 15 watt LED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified Make :-Crompton/Havells/Philips

Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2'x2' LED 36 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can be suspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2'x2' LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can be suspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed in repairs recess mounting 2'x2' LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed elegantly designed sleek surface mounting pressure die-cast aluminium in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver with glare free symmetrically illumination 12watt LED light fitting and including providing internally prewired,connector incl providing kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed in repairs flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed in repairs LED bldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells or equivalent make in Crompton / Philips as approved

Supply and fix GI bracket pipe suitable for above light fitting size 40 to 63 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.Make of GI pipe- Jindal/Tata/Bansal

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs as light source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells or equivalent in Crompton/Philips any approved make

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:- Legrand /Havells or equivalent in Hagar/Schneider

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,TPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:- Legrand /Havells or equivalent in Hagar/Schneider

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand /Havells or equivalent in Hagar/Schneider

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:- Legrand /Havells or equivalent in Hagar/Schneider

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and MCB TPN 40 63 Amps 10 KA,"C" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia in concealed ISI marked medium grade(MMS) ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit 25 mm dia in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 2.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 2.5 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit 25 mm dia ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make

Supply and fix MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand/ABB/Schneider or equivalent

Supply and fix compact air insulated rising main busbar made in 2 mm sheet steel metal enclosure with ETP grade copper bus bar,4 pole, 250A,4 way amps,busbar breaking capacity of 35 KA and IP 54 protection suitable for wall mounted concealed in wall surface level and including providing incoming and outgoing features and necessary conneceted accessopries complete all as specified and directed . Make- Havells/Standard/HPL/Legrand.

Supply and fix ON load change over switch 415V in sheet metal enclosure/open excution type as per site requiremet 4 pole of capacity 250 amps and including providing incoming and outgoing cable features and necessary hole fasters, lugs,nuts,bolts and washers etc and including providing necessary alterations,welding works in existing panels complete all as specified and directed.Make- Havells/Standard/HPL/Legrand.

Supply and fix MCCB, 320 Amps,4 pole,415 Volts , 35KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells/Standard or as equivalent approved

Taking down old unserviceable ceiling fan of any type/size from existing location and deposit in MES store yard and Supply and fix ceiling fan of size 1200 mm sweep,high speed, single phase, 240Volts,AC, 50Hz, BEE not lessthen any star rated as approved colour and including hanging GI hook with necessary connecting accessories and testing complete all as specified and directed.Make:-Crompton Jura Prime or equivalent in Atomberg/Havells/ Orient as approved.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers.Make:-Atomberg/Havells/Crompton or as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep with blades and frame with louvers.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply and fix PVC conduit/casing and caping of size not less than 25X25 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC conduit/ casing and caping of size not less than 50X50 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fix PVC casing and caping of size not less than 50X100 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along the wall/ceiling/roof/groud/floors etc complete all as specified and as directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Supply and fixing sheet steel enclosure in CRCA sheet suitable for MCCB100Amps to 160Amps,4pole,415Volts,16/18KA MCCB and including providing necessary nut,bolts and washers and fixed in wall concealed/surface as site conditon complete all as specified and directed.make:-Havell/Legrand/Indoasian/ABB

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.Make:- Havells/Finolex/Polycab/Universal

Supply and fix 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP-65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton or equivalent in Havells / Crompton /Philips as approved

Supply and fix 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP-65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton or equivalent in Havells / Crompton /Philips as approved

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab

M&L for rendering 15mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new plastered of wall/ceiling or concrete surface of walls or concrete and applying two coats of 3 mm thick wall care putty complete all as specified and directed

M&L for preparation of old decorated surface of wall and apply two coats of white wash complete all as specified and directed

M&L for applying two coats of oil bound distember on wall or concrete over a coat of primer on prepared surfaces including,rubbing with sand paper after complete removal of existing treatment complete

Supply and fixed in repairs modular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular type socket shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular switch 2 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotation ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs modular bell push 1 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixed in repairs , modular metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular metal flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular metal flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular metal flush box 6 to 18 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular white cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular white cover plate with frame 2 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 4/5 module ,ISI marked as per site rqmnt and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs modular white cover plate with frame 6 module incl ,ISI marked and suitable for existing type as per site requirement and screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed in repairs, modular white cover plate with frame 8 to 18 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

M/s Ats Electricals (BID ID -3170589)

DHABALESWAR ENGINEERING WORKS (BID ID -3170618)

M/s Bapujee Builders and Traders (BID ID -3170912)

M/S S.K GHOSE (BID ID -3170780)

M/s M M Engineering Systems (BID ID -3170968)

M/S JAGANNATH SASMAL (BID ID -3170628)

R K Traders (BID ID -3170609)