REPAIR/REPLACEMENT OF PLASTER, FLOORS, JOINERY, CHAJJA, SUNKEN REPAIR, PLUMBING AND ALLIED SERVICES AT SALARIA ENCLAVE, PIRU SINGH ENCLAVE AND ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Taking down chowkat or frame not exc 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sq.m but n exc 4.0 Sq.m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description area exceeding 2 sqm each complete all as specified and directed.

Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed . Note : Labour for taking down of shutter including in this item, nothing shall be paid extra.

Demolition cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded or pointed any mortar complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cement plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 using ready mix plaster bags on brick/concrete surfaces of external walls finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on other than fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on concrete surface of ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for clean the surface using wire brush, remove existing paint wall putty and remove the entire loose particles from the dampness surfaces of walls and apply Dampguard solution mixed with wall care putty and apply two coats of mixed solution as per manufacturer instrution complete all as specified and directed

M&L for demolition of existing treatment of sunken surfaces and preparation of sunken surfaces by cleaning of and removal of loose concrete and provide PCC (1:7:12) type F-2 using 40 mm graded brick aggregate in, filling and mass concrete as in sunken portion and also ensure that no leakage / seepage after 24 hrs ponding test as in treated sunken areas and filling cracks with polymer modified mortar and applying 2 coats of WPC in sunken areas and laying a protective plaster in 10mm thickness in cement mortar (1:3) admixed with adhesive @ 220ml per bag of cement and applying mix in cement water ratio 1:1:5 by volume using copolymer latex liquid chemical on floor and vertical surface of sunken floor as per manufacturers instructions complete all as specified and directed.

M&L for preparation newly plastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation newly surfaces plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation old plastered or unplastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L for preparation old plastered/ decorated surface of walls and applying two coat of cement based paint at any height complete all as specified and directed.

M&L for preparation old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper using roller for painting over a coat of 2mm thick wall care putty complete all as directed and specified.

M&L for applying washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including forming/provinding groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster in each Sqm area as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L for prepration old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration old steel or iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation new steel or iron surfaces of any description not otherwise described exc 10 cm widht or girth and applying two coats of synthetic enemal paint over one coat of red oxide primer complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded incl sliding door bolts, 300 mm long ordinary mild steel rat rail rod pattern springs including roller plate complete (suitable for MAP Qtrs) (Sample kept in AGE B/R-II office) all as specified and directed

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay, handles, tower bolts, lugs including treated with for or coal tar black paint on steel surface in contact/embeded in concrete/masonry work complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for securing of old glass of any description in existing metal frame glazed with putty / beads including removing loose or decayed putty, beads painting / oiling one coat on rebates, groves reputting and painting / oiling puttied surface to match existing work (New length of frame reputtied shall be measured complete all as specified and directed

S&F 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm size mild steel butt hinges cold rolled medium weight (ISI marked) complete all as specified & directed.

S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 140mm long Floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs 140mm long Floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs MS barrel tower bolt 200 mm long, stove enamelled black, with bright bolt complete all as specified and directed.

S&F in repairs MS pressed handle 150mm long, oval type, stove enamelled black complete all as specified and directed.

S&F in repairs 250mm long mild steel sliding door bolts stove enamelled black ISI marked, with bright bolt not less than 12mm dia with and inc min of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs 300 mm long ordinary mild steel rat rail rod pattern springs including roller plate complete fixed to wooden/ steel frame complete all as specified and directed.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4.8mm thick tinted glass ordinary quality exc 0.5 sqm in each pane and fixed with rubber gasket beading and aluminium channels in aluminium windows, bookcase/shelf with rollers, wheels, aluminum clips, screws etc and making good as per site requirement complete all as directed and specified.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse as specified and directed

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed to either complete all as specified and directed.

S&F anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed. (i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Aluminium wire cloth 0.30 mm nominal dia of wire and average width of aperture 1.56 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos (x) Aluminium grill

S&F in repairs plain FRP sheeting 2mm at north light curves, roofs, windows, duct covering or at any other location by coach screw and washer, nut & bolt, staple pins or any other sutiable means all as specified and decided Note: To be fixed in patches all as specified and directed and ht of bldg can be more than 10 meters

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square) polished , area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

All as described in Ser item No. 57 but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

All As described in Ser item No. 59 but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300X200X7mm thick set and jointed in neat cement slurry and pointed in white or colored cement laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colored cement laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for granite(of any type) tiles 16 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and making suitable holes for gas pipe complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, and pavings, etc. complete all as specified and directed

M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed.

S&F 20mm bore medium grade GI tubes with all fittings and fixed complete to walls or laid in floor complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including 20 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

M&L for MS plain sheet 01 mm thick for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water tank capacity n. exc 1000 ltr complete all as specified and directed.

S&F in repairs 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitrious china squatting pan Orissa pattern size 580x440mm white with integal foot rest, including concrete bedding, P or S trap lime concrete bedding and all internal fitting, inlet, outlet pipe connections etc & making good floor complete all as spd & directed.

S&F in repairs vitrious china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.

S&F in repairs vitrious china wash basin white flat back size 630X450mm including 32mm dia CP waste coupling, waste pipe and brackets complete all as specified and directed.

S&F in repairs EWC seat cover with fittings complete all as specified and directed.

S&F in repairs Toilet paper holder of brass, chromium plated or stainless steel complete all as specified and directed.

S&F in repairs sinksmade of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated 32mm bore with long screwed shanks and fly nuts including making holes in brick walls for brackets and fixed in CM (1:3) or PCC 1:2:4 type B0 complete all as specified and directed

S&F in repairs plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.

S&F in repairs CP 15mm bore bib tap cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs CP 15mm bore bib tap two way cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs 15mm bore brass chromium plated wall mixer three way telephonic type for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed .

S&F in repairs 15mm dia Swan neck wash hand basin mixer, cast copper alloy chromium plated (suitable for MAP Qtrs) or (sample kept in AGR B/R-II office) screwed for iron pipe complete all as specified and directed.

S&F in repairs CP angle valve 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated shower rose 150mm complete all as specified and directed.

S&F in repairs brass adjustable rod for centre hole WHB mixer inc round washers and packing as per site requriment complete all as spd and directed

S&F in repairs pair brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC connection hot water fibre reinforced 600mm long with brass check nuts and PVC washers at both ends (suitable for MAP qtrs) complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed

S&F in repairs PVC waste pipe 40 mm dia complete all as specified and directed

S&F in repairs CP WHB waste coupling of size 32mm complete all as specified and directed.

S&F in repairs CP kitchen sink waste coupling of size 40mm complete all as specified and directed

S&F in repairs PVC Bath cabinet with mirror 18" x 22" x 4.25" complete all as specified and directed.

S&F in repairs for looing mirror SIZE 900 X 600 X 5-6MM (SUITABLE FOR MAP QTR - AS PER SAMPLE KEPT IN AGE B/R-II OFFICE) fixed with plastic/wooden plugs, chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repairs CP health faucet set classic chrome 2 in 1 (with tube and hook) with 1 mtr CP tube & Hook complete all as specified and directed.

S&F in repairs chrominum plated brass jet spray of 15mm bore sutible for fixing in EWC of MAP Qtrs complete all as specified and directed.

S&F in repairs CP grating (with and without hole) of size 125mm complete all as specified and directed.

S&F in repairs 10mm thick corner glass shelf with bracket complete all as specified as directed.

S&F in repairs stainless steel soap dish fixed to plugs with chromium plated brass screws (suitable for MAP Qtrs/As per sample kept in AGE B/R-II Office) complete all as specified and directed.

S&F in repairs stainless steel towel ring fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Brass chromium plated tubular towel rail 20mm dia , D type 60mm long between flanges complete all as specified and directed.

S&F in repairs stainless steel peg set 8 nos in 450mm length stirrupe dia of hooks 6mm complete all as specified and directed.

S&F in repairs mild steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed

M & L for Cleaning of water tanks of capacity exceeding 500 litre and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

S&F in repairs 10/12/14 inches long SS sliding channel for drawer complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified and directed.

S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.

S&F in repairs 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work ( incl continouous piano hinges mild steel bright finish width of flap 30mm & 5mm thick 2nd class hardwood plain fillets rectangular around the shutter& front of shelves as per ground requriment) as in shelves, cup board, or similar items open edge of board fixed with 2nd class HW wooden beading fitted with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite number of clamps made out of flat iron 25x4mm complete all as specified and as directed

S&F 75mm bore PVC (SWR) pipes in any length jointed with adhesive fixed to walls fixed with and including requisite number of clamps made out of flat iron 25x4mm complete all as specified and as directed

S&F 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F in repairs PVC (SWR) reducers of 110 mm bore complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs PVC (SWR) cowl, 75 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) cowl, 110 mm bore complete all as specified and directed.

veer enterprises

B.K.construction

VIRAT CONSTRUCTIONS