Replacement of 10-year-old or older AC machines installed at different chambers and sections at Midnapore Medical College Building, Paschim Medinipur.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supply of 240 V timer DB with suitable size sheet steel enclose double door, phosphatised powder coated, neutral bar , din rail with IP-43 protection comprised with 1 no. 20/25A DP MCB (‘C’ Curve, 10KA), 1 no. 24 hours programmable timer switch and 1 no. 25A contactor complete with internal wiring by 1.1kv grade 4 sq mm. FR PVC insulated copper wire incl. 1 no auto manual by pass troggle switch and provision for earthing attachment incl. LED indicating light for running condition with locking arrangement (for controlling individual AC machine)[Make:- L&T /Cabtree]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required (a) 2 x 4 sqmm + 1 x 2.5 sqmm) as ECC ( From HTPN DB to AC )

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. (a) 2x4 sqmm + 1x 2.5 sqmm

Supply & Delivery of split type fixed speed, Non-Inverter Air conditioning machine having the following specification :Rated EER: 3.88, Compressor Type: Rotary, Rated Voltage/Phase/frequency - 230V/Single/50hz, Max. Power Input (Watts) : 1714, Min. Cooling Capacity (Watts): 6650, Airflow rate for indoor unit(M3/H.): 1400, PM filter, Eco Cool 4way wide & long airflow, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, auto swing, fan speed option (low/medium/high/turbo) etc. Refrigerant- R32/R410A. Min. BEE Star rating : 3 star, minimum tonnage : 1.9 Ton or Higher [Make- Mitsubishi Electric - MS/MU-AGZ24VF-DA1-KT/ O General]

Supply & Delivery of split type fixed speed, Non-Inverter Air conditioning machine having the following specification :Rated EER: 3.89, Compressor Type: Rotary, Rated Voltage/Phase/frequency - 230V/Single/50hz, Max. Power Input (Watts) : 1295, Min. Cooling Capacity (Watts): 5050, Airflow rate for indoor unit(M3/H.): 1020, PM filter, Eco Cool 4way wide & long airflow, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, auto swing, fan speed option (low/medium/high/turbo) etc. Refrigerant- R32/R410A. Min. BEE Star rating : 3 star, minimum tonnage : 1.5 Ton or Higher [Make- Mitsubishi Electric - MS/MU-AGZ18VF-DA1-KT/ O General]

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.

Supply and Fixing of (i) Copper pipe 3/8"/1/2" for liquid as required. (ii) Copper pipe 5/8" / 1/4"for suction as required (iii) Insulation Foam 3/8" / 1/2" for liquid as required. (iv) 5/8" / 1/4"for suction as required. (v) laying of 3/4 core 2.5 sqmm 1.1kv grade xlpe insulated round flexible copper cable as required. (Make:- Havells/ Gloster/ KEI/ Carrency)

PVC Drain pipe for drainage of water for Split A.C. both indoor unit.

S & F of 32 mm UPVC hard Drain pipe for drainage of water for AC Machine.

Note: 1) All the above rates should be quoted inclusive of all taxes & duties, District charges, Riverine charges and LWC as applicable, with cost of maintenance, servicing, supply & replacement of spares for 1 (one) years from the date of commissioning. 2) The Agency must procure the materials from the manufacture/OEM or their authorised sales Channel so that the standard warranty/support of the manufacturerer/OEM becomes applicable to the product to be delivered and installed by them. Documents that authenticate such procurement from the manufacturer/OEM or from their authorised sales Channel and standard warranty/support should be sent from the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refubrished materials are supplied and installed, penal action will be taken as per existing rule. Before execution of the work the prospective bider has to submit layout drawing as per design of OEM dully approved by the OEM. 3) Total is rounded off to the nearest rupees.