CONSTRUCTION OF SLUICE CHAMBERS OF VARIOUS CONTROL VALVES AT HMT AND BEMINA SITE, IMPROVEMENTS TO WATER SUPPLY TO DAR GUND, KHOMANI CHOWK, MEHBOOB COLONY, HAMDANIYA COLONY SECTOR (A) TO DURBAL INCLUDING LAYING SHUNT LINE ALONG Read ENIT

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5Mtr. in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, depth upto 1.5Mtr. Including disposal of excavated earth upto 1Mtr. from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil.

Providing and laying dry stone soling in foundation trenches hand packed and consolidated by hand ramming (Quarry) including all carriages upto site of work.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:4:8 (1 Cement : 4 coarse sand : 8 Graded Stone aggregate 40mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering, finishing, and reinforcement. All work upto plinth level. 1:2:4(1cement:2coarsesand:4graded stone aggregate 20mm nominal size)

Reinforced Cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets columns pillars piers abutments, posts, struts etc. upto floor five level excluding cost of centering shuttering finishing and reinforcement. 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal size) Crushed.

Reinforces cement concrete work in beams, suspended floors, roof having slope upto 150 landings, balconies, shelves, chajjas, lintels, bands, plain window aills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal size).

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Hot rolled deformed bars.

Centring and Shuttering including strutting, propping etc. and removal of form for:

Foundation, footings, bases of columns etc. for mass concrete.

Walls any thickness including attached pilasters buttresses, plinth and string courses etc.

12mm thick cement plaster of mix 1:4 (1 Cement : 4 Coarse sand).

Providing, fabrication and fixing including all carriage of manhole cover and ladder including welding. Applying of steel primer red oxide anti corrosive 8mm thick.

Supplying, Laying and fitting of G.I. Pipes medium class (ISI marked) from registered / Gem approved manufacturers as per IS 1239 (Part I) 2004 6th revision read with upto date amendments. This item also includes all types of carriages, pipe specials whatever required, cost of white lead and hemp oil etc. complete job excluding cost of earth work

80mm dia nominal bore.

65mm dia nominal bore.

. 50mm dia nominal bore.

. 40mm dia nominal bore.

25mm dia nominal bore.

20mm dia nominal bore.

Making connection of G.I. Distribution branch with G.I. Main of following sizes by providing and fixing of Tee, including cutting and threading the pipes etc. Complete Job.

Upto 25-40mm dia nominal bore.

Upto 40-80mm dia nominal bore..

Making connection from 450mm dia, D.I. Pipe line by making hole and fixing nipple and by using special T&P to carry out the complete job. The job includes earth work excavation, refilling and dewatering and cost of pipe specials whatever required during conducting the job.

100mm dia connection

80mm dia connection

50mm dia connection.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50Mtrs and lift upto 1.5m.

Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job.

Providing and fixing of Gate Valves of approved branded quality (Gun Metal) confirmation ISI Codes including all types of carriages.

80mm dia

65mm dia

Dismantling manually / mechanically including stacking of serviceable material and disposal of un-serviceable material within 50Mtr. lead Bituminous road.

Supply and laying in position centrifugally Ductile Iron, S&S or flanged pipes (ISI marked) as per IS:8329 / 2000 read with upto date amendments from registered / Gem approved manufacturers holding valid BIS licenses including all types of carriages complete. i. 100mm dia DI Pipes

Providing push–on-joints to Centrifugally (Spun) cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. i. 100mm dia.

Providing, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm thick plate as per the requirement of site. This item includes cost of lead, spun yarn and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and bituminous paint and including all carriages, leads lifts and cutting of pipes etc.

Making nipple for introducing and fixing of 50mm dia G.I. Tees to join existing or new constructions by way of cutting to required size and threading of laths including all transportation of pipes upto workshop from site of work to and fro complete job. The job includes the cost of tees and also connecting the existing or new lines including the cost of pipe specials whatsoever required for making the line functional. The job includes earth work excavation, refilling and dewatering during conducting the job.

Providing and fixing of Sluice Valves of Kirloskar / VAG / Talis approved branded quality confirmation ISI Codes. 1.6 rating, including all types of carriages.

100mm dia (double flanged Sluice Valve)

50mm dia (double flanged Sluice Valve)

Carriage of different materials from various source to actual site of work by mechanical transport.

Sand and Stone aggregate for an avg. lead of 21Kms.

Stone Soling for an avg. lead of 21Kms.

M/S MIR and CO