Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹51.4 L+₹1.0 L (2.06%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹51.7 L+₹1.3 L (2.54%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹51.8 L+₹1.4 L (2.80%)Rejected-AOC HOUSE NO 99 3RD FLOOR SK JAIN BUILDING KALIBARI ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹53.6 L+₹3.2 L (6.43%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR/MAINT OF DG SETS OF VARIOUS CAPACITIES FOR STANDBY POWER SUPPLY
2023_MES_615069_1
8572/C/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
RANGAPAHAR
Class D, category b(I)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹99,900
21 Oct 2023
22 Aug 2023
25 Sept 2023
22 Aug 2023
23 Sept 2023
5 Sept 2023
22 Aug 2023 - 29 Aug 2023
Amount
Carrying out of 'B' check of DG set cap 160 to 250 KVA on quarterly basis through rep/ mechnic of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'B' check of DG set cap 62.5 to 125 KVA on quarterly basis through rep/ mech of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'B' check of DG set cap 20 to 40 KVA on quarterly basis through rep/ mech of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'D' check of following type DG Set thorugh mechnic of OEM :- Dismantling of the fwg DG sets engine carefully, checking throughly all the defective parts including repair/replacement of the following defective parts through authorised service engineer/mechanic from M/s Kirloskar Oil Engines Ltd and reassembling the engine after overhauling including testing complete, including the fwg services etc complete all as specified and as directed. (a) Servicing to cylinder head including checking of valve leakage, valve grinding or replace if required and fixing and testing complete. (b) Decarbonization of combustion chamber, Piston ring grooves (c) Radiator cleaning with chemical and servicing (f) Water pump assembly servicing (g) Turbo Charger Servicing. (h) Clean the diesel tank , Engine sump and strainer. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
(a) 200/250 KVA Capacity
(b) 160 KVA Capacity
(c) 100/125 KVA Capacity
(d) 62.5/ 75 KVA Capacity
(e) 20 to 40 KVA capacity
Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 62.5/ 100 KVA capacity, 4/6-cyllinder Kirlosker / any approved make of following items etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Liner
Piston assy
Piston ring
Gasket Set
CR Bearing
Main Bearing
Thrust washer
Valve
Valve Seat
Valve Guide
Valve Seal
Lube oil Pump
Water Pump
O' Ring
Cooper Washer
V belt of suitable size
Crank Shaft
Head Assembaly
Fuel Pump & Injector
Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 125 to 200 KVA capacity, 4/6-cyllinder Kirlosker / any approved make of following items etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Liner
Piston assy
Piston ring
Gasket Set
CR Bearing
Main Bearing
Thrust washer
Valve
Valve Seat
Valve Guide
Valve Seal
Lube oil Pump
Water Pump
O' Ring
Cooper Washer
V belt of suitable size
Crank Shaft
Head Assembaly
Replacement of following unserviceable parts / items from the engine / alternator of diesel engine driven generating set of 250 to 320 KVA capacity, 4/6-cyllinder Kirlosker / any approved make of following items etc complete all as specified and as directed. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Liner
Piston assy
Piston ring
Gasket Set
CR Bearing
Main Bearing
Thrust washer
Valve
Valve Seat
Valve Guide
Valve Seal
Lube oil Pump
Water Pump
O' Ring
Cooper Washer
V belt of suitable size make: Fanner or equivalent as approved by GE.
Crank Shaft
Head Assembaly
M&L for Repair and replacement of complete wiring of existing panel board/ control panel board including replacement of Ameter, temprature meters,oil pressure gauge and ignition switch etc complete all as specified and as directed for 40 KVA to 62.5 KVA DG set
M&L for Repair and replacement of complete wiring of existing panel board/ Control panel board including replacement of Ameter, temprature meters,oil pressure gauge and ignition switch complete etc all as directed.for 100 KVA to 250 KVA DG set
Draining out Lub oil from the oil pan assy of DG set cap upto 62.5 to 250 KVA and keeping aside for reuse and taking down oil pan assy complete from the engine block for cleaning the eitire oil pan with recommended solution and resembling the oil pan after replacement of gasket oil pan (Lub oil shall be examined for reuse by Engr in charge) However if the oil is found unsuitable for reuse, fresh oil shall be measured and paid separaetly under respective item etc complete all as specified and as directed
Decoupling the alternator from the engine and taking out alternator 62.5/100/125 KVA from base plate and carrying the u/s alternator to local market incl dismantling the entire alternator taking out burnt enamelled copper wire ,preparing the stator for rewinding and rewinding the stator with super enamelled copper wire of superior quality incl application of insulating material, cotton tapes and suitable heat treatment ,transporting back to site and refixig to the engine from retrieved position etc complete all as specified and as directed
Taking out carefully and repairing of fuel injection pump assembly complete from the engines of following capacity of DG sets including maintenance, servicing, replacement of valves, washers etc re-assembling calibration, setting for proper function, refixing and testing etc complete all as specified and as directed
(a) 20 to 40 KVA capacity
(b) 62.5 to 75 KVA capacity
(c ) 100 to 250 KVA Capacity
Taking down u/s dynamo/charging alternator 12 volts from the engine and supply and fixing charging alternator 12 volts with necessary electrical connection with suitable cap flexible copper wire and sleeves etc complete all as specified and as directed Make : Lucas TVS or equivalent.
Taking down the turbo charger from the engine of DG set of 62.5/75/100/250 KVA after disconnection of all electrical connection and supply and fixing of the same on the position complete all as directed including elctric welding to the bracing of gaurd and the outer frame of turbo charger.
Dismantling & taking out carefully, reparing the self starter from the engine of following capacity of DG sets with opening up, cleaning / servicing and replacement of carbon brushes with holder and assembling back, refixing and testing complete etc all as specified & directed.
(a) 20 to 40 KVA capacity
(b) 62.5 / 75 KVA capacity
(c) 100/125 KVA capacity
Taking out carefully for repairing the radiator assembly from the engine of following capacity of DG sets by disconnecting of inlet and outlet and over-hauling / servicing the radiator cleaning / removing blockage arresting leakage with necessary welding / brazzing as required and fixing back in its position for testing complete etc all as specified & directed.
(a) 20 to 40 KVA capacity
(b) 62.5 /75 KVA capacity
( c) 125 to 250 KVA capacity
Dismantling and taking out the necessary connection carefully from MS fuel tank of any size / type of DG set by disconnecting of fuel pipes connections, draining out of fuel from the tank, cleaning & removing sediments, dirt etc from fuel tank and replacement of fuel pipe line with highly transparent PVC flexible threaded pipes of suitable size including painting of outer surface of fuel tank with synthetic enamel paint of one coat after cleaning, scrubbing the surfaces and writing the capacity of fuel tank and marking fuel level position with synthetic enamel paint for the following DG sets etc complete all as specified and as directed
(a) 20 to 40 KVA capacity
(b) 62.5 KVA capacity
(c ) 75 KVA capacity
(d ) 125 to 250 KVA capacity
M&L for Repair / maintenance of exhaust system including replacement of exhaust pipe, bracket with clamps, nut bolt and washer, exhaust manifold packing etc all as specified and directed by Engr - in - charge.
S & F in replacement battery terminal brass heavy duty complete etc all as specified and directed.
Supply & fixing in replacement of self starter motor suitable for 62.5/100/125 KVA DG set 12 Volt DC of same capacity / model / make / type and connection up of existing make (TVS / Lucas/BOSCH or equivalent make as approved by GE) etc complete all as specified and as directed
Supply & Fixing in repair neon Indicator lamp for 230 volt, 50 Hz for indication to incoming and out going supply complete all as specified & directed.
S & F in repair /replacement of winding exciter assembly for DG Set of any capacity / Make all as manufacturer design including connection and testing complete etc all as specified and directed.
S&F in replacement On load change over switch 4 pole, 250 Amp rating, 415 Volts, with steel enclosure and front handle type including connection lugs and testing complete etc all as specified and directed. Make-Havells/standard or equIvalnet.
S & F in replacement On load change over switch 4 pole, 160 Amp rating, 415 Volts, with steel enclosure and front handle type including connection with lugs and testing complete etc all as specified and directed. Make-Havells/standard or equIvalent.
S & F in replacement Manual change over switch 4 pole, 200 Amp rating, 415 Volts, with steel enclosure and Side handle operated type including connection with Lugs and testing complete etc all as specified and directed. Make-Havells/standard or equIvalent.
M&L for Replacement of old/UNSV Engine oil 20W 40/ 15 W 40, multi grade 2904C servo super for DG sets all type complete etc all as specified and directed. Make : Ashok leyland/Castrol/ Cummins/ Kirloskar/valvoline
Supply and filling coolant for radiator in suitable container capacity complete etc all as specified and directed.
Supply and filling distilled water in suitable container capacity complete etc all as specified and directed.
S & F electric shock treatment chart coloured of size approximetely 3 ft x 2 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete etc all as specified and directed.
S & F machinery maintenance chart coloured of size approximately 3 ft x 2 ft & 6 mm thick plywood with teak wood frame including covered with plastic laminated sheet complete etc all as specified and directed.
Repairing of electrical ON LOAD AMF panel of DG set of Capacity 62.5 KVA with repairing and replacement of minor parts of contractor, coil, timmer or other parts to smooth fuctioning of panel etc all as required and directed at site
M&L for Repairing of electrical ON LOAD AMF panel of DG set of Capacity up to 100 to 250 KVA with repairing and replacement of minor parts of contractor, coil, timmer or other parts to smooth fuctioning of panel etc all as required and directed at site
Dismantling / taking down of unserviceable turbo charger from following DG sets and transportation to authorised workshop of respective make / brand for repair / maintenance / balancing including replacement of required parts and make the same serviceable / functional etc complete all as specified and as directed (a) 20 KVA to 62.5 KVA Capacity
Supply & Fixing in replacement of coupling hub of alternator of existing size and make of capacity 62.5 to 125 KVA DG set complete etc all as specified & directed.
Supply and fix self starter 24 volt etc complete all as specified and as directed
M&L for Repair/ Replacement of maintenance free starting battery 12 volts,180AH etc all as specified and directed by engineer in charge. MAKE : EXIDE/ AMARON / LUCAS
Repair / maintenance of battery charger of existing capacity 6 to 24 volts DC including replacement of unserviceable parts such as diodes, rotory switches, transformers etc of the same make & model complete etc all as directed.
Repair to self starter ,opening and repair to commutator replacement of carbon brush rewinding of stator coil and fixing self starter for 100 to 250 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge.
Supply & fixing in repair thermostate assembly for 250/200/125/75/62.5 KVA DG Sets complete all as specified & directed by Engineer-in-Charge.
Taking out old asbestos rope from exhaust silencer system, cleaning silencer pipe exhaust system wrapping up new asbestos rope on exhaust silencer system applying plaster of paris on complete exhaust system upto 250 KVA DG Set complete etc all as specified & directed by Engineer-in-Charge.
Taking out radiator assembly from the engine base frame for cleaning all chocked tubes of water cooler radiator asembly by applying suitable chemical for cleaning of chocked tubes & re-assembling after cleaning or brazing of tubes if required for 100 to 250 KVA capacity complete etc all as specified & directed by Engineer-in-Charge.
Opening the Cam shaft with connected nut bolts and remetaling and grinding and necessary lathe work for smooth fuctioning etc complete all as specified and as directed
Taking out the crank shaft assembly from DG set shifting to Workshop and return back and remetaling and necessary lathe work for any capacity etc complete all as specified and as directed
Opening the shadow less light ceiling mounted /movable with repair and replacemnt of lamps 12 volts-4 nos of suitable existing capacity and fixing and repair to minor part if required etc complete all as specified and as directed
S&F the rubber insulating mat 2x1 mtr 19 mm thick, suitable for electrical supply laid at various installations complete etc complete all as specified and as directed
Opening the water assembly from DG set and taking out and repair to water pump with replacemnt of water seal ,other related part and making good the water assembly complete of any capacity with fixing etc complete all as specified and as directed
Supply & fixing in replacement of MCCB triple pole 200 Amps 35 KA, 415 volts etc complete all as specified and as directed
S&F in repair MCCB triple pole, 160 Amps, ultimate breaking cap 36 KA complete with motor break protection etc all as specified and directed.
S&F in repair MCCB four pole, 160 Amps, ultimate breaking cap 36 KA complete with motor break protection etc all as specified and directed.
Carrying out of 'B' check of DG set cap 200 to 320 KVA on quarterly basis through rep/ mechnic of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'B' check of DG set cap 160 KVA on quarterly basis through rep/ mech of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'B' check of DG set cap upto 30 KVA on quarterly basis through rep/ mech of OEM including checking, cleaning, adjusting/tightening,oiling, greasing and reseting of existing part 'decarbonising of battery terminals of DG Set at different location of installation and keep ready to set for proper functioning of valve 'V' belts, pulleys, Fan hub, idler, water pump, filters, engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbon brushes, springs, AVR's, exhaust pipes etc complete all as specified and as directed Note :- Spares part shall be measured and paid separately under respective item of Sch A.
Change of Engine oil
Change of Engine oil filtter
Change of fuel filter
Change of Air Filter
Change of water separator
Carrying out of 'D' check of following type DG Set thorugh mechnic of OEM :- Dismantling of the fwg DG sets engine carefully, checking throughly all the defective parts including repair/replacement of the following defective parts through authorised service engineer/mechanic from M/s Kirloskar Oil Engines Ltd and reassembling the engine after overhauling including testing complete, including the fwg services etc complete all as specified and as directed:- (a) Servicing to cylinder head including checking of valve leakage, valve grinding or replace if required and fixing and testing complete. (b) Decarbonization of combustion chamber, Piston ring grooves (c) Radiator cleaning with chemical and servicing (f) Water pump assembly servicing & Clean the diesel tank , Engine sump and strainer. Note :- Spares part shall be measured and paid separately under respective item of Sch A.
(a) 320 KVA Capacity
Repair and replacement of complete wiring of existing panel board/ Control panel board including replacement of Ameter, temprature meters,oil pressure gauge and ignition switch complete etc all as directed.for 100 KVA to 250 KVA DG set
Draining out Lub oil from the oil pan assy of DG set cap upto 160 to 320 KVA and keeping aside for reuse and taking down oil pan assy complete from the engine block for cleaning the eitire oil pan with recommended solution and resembling the oil pan after replacement of gasket oil pan (Lub oil shall be examined for reuse by Engr in charge) However if the oil is found unsuitable for reuse, fresh oil shall be measured and paid separaetly under respective item etc complete all as specified and as directed
Taking out carefully and repairing of fuel injection pump assembly complete from the engines of following capacity of DG sets including maintenance, servicing, replacement of valves, washers etc re-assembling calibration, setting for proper function, refixing and testing complete all as specified & directed.
320 KVA capacity
Taking down the turbo charger from the engine of DG set of 160/250 KVA after disconnection of all electrical connection and supply and fixing of the same on the position etc complete all as specified and as directed including elctric welding to the bracing of gaurd and the outer frame of turbo charger.
Dismantling & taking out carefully, reparing the self starter from the engine of following capacity of DG sets with opening up, cleaning / servicing and replacement of carbon brushes with holder and assembling back, refixing and testing complete etc all as specified & directed.
(a) 250/ 320 KVA capacity
Taking out carefully for repairing the radiator assembly from the engine of following capacity of DG sets by disconnecting of inlet and outlet and over-hauling / servicing the radiator cleaning / removing blockage arresting leakage with necessary welding / brazzing as required and fixing back in its position for testing complete etc all as specified & directed.
(a) 250/ 320 KVA capacity
Dismantling and taking out the necessary connection carefully from MS fuel tank of any size / type of DG set by disconnecting of fuel pipes connections, draining out of fuel from the tank, cleaning & removing sediments, dirt etc from fuel tank and replacement of fuel pipe line with highly transparent PVC flexible threaded pipes of suitable size including painting of outer surface of fuel tank with synthetic enamel paint of one coat after cleaning, scrubbing the surfaces and writing the capacity of fuel tank and marking fuel level position with synthetic enamel paint for the following DG sets etc complete all as specified and as directed
(a) 250/ 320 KVA capacity
Supply & fixing in replacement of self starter motor suitable for 250/ 320 KVA DG set 12 Volt DC of same capacity / model / make / type and connection up of existing make (TVS / Lucas/BOSCH or equivalent make as approved by GE) etc complete all as specified and as directed
Dismantling / taking down of unserviceable turbo charger from following DG sets and transportation to authorised workshop of respective make / brand for repair / maintenance / balancing including replacement of required parts and make the same serviceable / functional complete etc all as specified & directed. (a) 200/ 250/ 300 KVA Capacity
Dismantling the servo volatge satbiliser in position upto capacity 100 KVA and lifting of core from the stabiliser for identification of fault and reassembling after rectification of fault. Note:- Spares reqd for replacement shall be paid under the respective item as under.
S & F in replacement of auto manual switch and making electrical connection complete all as specified and as directed.
S & F in replacement of defective electronic circuit card (PCB) and making electrical connection complete all as specified and as directed.
S & F in replacement of defective microproccessor based control card for each phase and making electrical connection complete all as specified and as directed.
S & F in replacement of defective servo motor 3 Kg torque and making electrical connection complete all as specified and as directed.
S & F in replacement of unserviceable carbon brush suitable for servo voltage stabiliser upto 100 KVA cap and making all electrical connections complete all as specified and as directed.
M/S SANJAY ENTERPRISES
M/S SHANTI UDYOG
VAISHNO ASSOCIATES
Shri Atoshe Tuccu
das enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .