Construction and renovation work of B. Borooah College, Kamrup (M) under RUSA

Amount

Earth work in excavation for foundation trenches of walls, footing of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling dressing, watering and ramming etc. and removal of surplus earth with all lead and lift or directed and specified in following classification of soils including bailing out water where necessary as directed and specified i) Upto a depth of 2m below the existing ground level.

Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage , watering ,ramming etc.complete as directed and specified including payment of land compensation Forest Royality , Sales tax & other duties & tases as may be necessary. loading & unloading. ( Local soil ) B) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 in foundation bed for footing , steps, walls, brick work etc. as directed & specified including curing complete (shuttering where necessary shall be measured & paid separately). a)In prop.1cement: 3 sand : 6 coarse agg. by volume

Providing soling in foundation and under floor at all levels with jhama bricks, sand packed and laid to level including all labour and materials complete. (a)

Providing and laying plain /reinforced cement concrete work in prop. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg ) 20 mm ……………….forced cement concrete work in (form work and reinforcement will be measured and paid separately) In sub-structure up to plinth level. Foundation, footings, columns with base slab, retaining walls,walls of septic tank, Inspection pit and the like and other work Not less than 10 cm thick up to P.L.

Providing &laying plain/ reinforced cement concrete work in prop.1 : 2 : 4 (1 cement :2 coarse sand 4 graded stone agg.) 20mm down including curing complete but exclu-ding cost of form work & reinforced cement concrete work in (form work & reinforcement will be measured & paid seperately ). In super structure form plinth level upto 1ST floor level ii) Column pillars posts, struts, suspended

Providing and laying 25 mm thick damp proof coarse with cement concrete in prop. 1 : 2 : 4 with graded stone agg. of 10 mm down nominal size including providing approve damp proof admixture in prop. As recommended by the manufacture including curing etc. complete as directed.

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering & propping etc. height of propping & centering below supporting floor to ceiling not exceeding 4 m & removal of the same for in-situ reinforced and plain cement concrete work. A ) In sub structure up to plinth level.

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering & propping etc height of propping & centering below supporting floor to ceiling not exceeding 4mm & removal of the same for in-situ reinforced & plain concrete work B ) In superstructure from plinth level In Columns

Beams

65mm thk. cement concrete floor consisting of 50mm under layer of cement concrete1:3:6 and 15mm thk. wearing layer in cement concrete1:1:2 finished with floating coat of neat cement including curing etc. complete as directed

230 tk Brick work in cement mortar with 1 st class brick including racking out joints and curing complete as directed in sub-structured up-to plinth level.

112mm thick 1 st class brick nogged wall in cement morter embeded with protruding rod n column including racking out joints and curing complete as directed in superstructure above plinth up to roof level ( protruding M.S. rod / Torsteel will be measured and paid for seperately under relevant item of steel work. a) In cement morter in prop. 1 : 4

Providing wood work in frames(chowkats)of door , windows , clearstory windows & other similar works wrought, framed & fixed in position in contact with c.c or brick masonry walls including supplying fitting & fixing with nails screws, bolts & nuts complete with M .S . flat hold fast (40mm X 3mm X 25mm ) as per design & embeded in cement concrete block in prop.1:1: 4 & with 2 coats of kiricide oiling to the timber faces in contact with cement concrete & masonry as directed specified. 3 a) Sal wood

Providing & fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band & face panels conforming to relevant I .S.iron but hings (100 X 75 X 3.5mm ) 6 nos with necessary wood screws a) decorative type face panel & block board core i) 40 mm thick

Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard sections without horizontal glazing bars , joints mitred and welded and p-roviding and fixing handles , angle cleat, rubber gusket etc. as required complete as specified.b) 3 Track sliding window

Painting two coats on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand pappering and stopping .i)b) high gloss

Cement plaster skirting

20mm thick cement plaster in two coats backing coat 15mm & finishing coat 5mm thick on rough side of single of half brick wall for interior plastering upto 1st floor level including arises internal rounded angles , chamber & / or rounded angles not exceeding 80mm in grith &finished even & smooth including curing complete as directed .(b) In cement mortar 1: 4

20mm thick cement plaster in single coat on fair side of brick/concrete wall for exterior plastering over walls upto a height of roof level above ground level including curing complete as directed (i)double coat plaster

10mm thick cement plaster in single coat on fair side of brick/concrete wall for ceiling plastering including curing complete as directed

Providing, fitting and fixing M.S. Grills of required pattern for opening with M.S. flat at required spacing and frame all around square, or round M.S. bars with round headed bolts and nut or screws. II) Ornamental grill. i) Fixed to wooden frame

Providing surface preparation for walls, ceiling etc. using average 1.50mmthk. plaster of paris including clearing, rubbing…

Providing two coats of acrylic water based wall putty of Asian paints…

Wall painting (two coats) with plastic emulsion paint approved brand and manufacture (Asain paint/ Berger paint / Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand pappered smooth.(a) Plastic emulsion paint

Applying one self priming coat of acrylic emulsion coating of Unicem “Rakshak” brand by thinning 1 ltrs. Of water over freshly plastered wall surface after thoroughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand pappered smooth as specified and directed .

Finishing wall with two coat of acrylic emulsion exterior coatings of Unicern “Rakshak” brand of required shade by thinning 1 ltr. Of paint with 750ml of water to give an even shade after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified.

Pile test: routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test.

Providing cast in situ manually driven rein forced cement concrete under reamed piles of cement concrete M20 grade of required bore-diameter, bulb diameter lengths and with reinforcements as per specifications Reinforcement to be measured and paid separately as per item No.21.4.1 (ii) a) 500mm bore diameter. (c) length-11000mm

Supplying , fitting and fixing in position reinforcement bars conforming to relevant I .S. code for reinforced cement concrete works in piles including straighting,cleaning and bending to proper shapes and length a)High yielding deformed bars /tor steel

Supplying , fitting and fixing in position reinforcement bars conforming to relevant I .S. code for R .C .C. work / R .B. walling Including straightening cleaning cutting and bending to proper shapes and length.

ELECTRICAL WORKS: Wiring for light/fan/call bell point with 2x1.5sq mm P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast / polycab/ MW or Equivalent make as approved by the Deptt.)in Surface system, including 6 Amp flush type switch/ bell push (Anchor penta / Gold meda l/ Kolor kany .kom/ Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with Phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/ Kolor Kany.com / Havells or equivalent make as approved by the Deptt.)etc. complete as directed and specified by the Deptt.Short point up to 3.00 meter. Length.

Medium point up to 6.00 meter. Length.

Long point up to10.00 meter. Length.

Wiring to 5 a pin 6 Amp plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed Industrial ( Multistrand ) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex / RR Kabel or Equivalent make as approved by the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG / Precision /Presto Plast / polycab / MW or Equivalent make as approved by the Deptt.) in Surface system, including 5 pin 6 Amp flush type plug socket and 6 Amps F/T switch (Anchor penta / Gold medal / Kolor Kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board ( I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq.mm. cable to third Pin of the plug socket etc. as required complete, when place elsewhere. Short point up to 3.00 meter. Length.

Medium point up to 6.00 meter. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4sq. mm. P.V.C insulated single core unsheathed Industrial ( Multistrand ) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent make as approved by the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast /polycab /MW or Equivalent make as approved by the Deptt.) in Surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta/ Gold medal /Kolor kany. Kom / Havells or equivalent make as approved by the Deptt.)GI/MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 2.5 sq.mm. cable to the 3rd Pin of the socket as required complete. Medium point up to 6.00 meter. Length.

Long point up to10.00 meter. Length.

Wiring for twin control light point with 1.5 sq.mm P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealedelectrolytic copper conductor for voltage grade up to 1100 volts ( Finolex / RR Kabel or Equivalent make as approved the Deptt.) Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast /polycab/MW or Equivalent make as approved by the Deptt.) system, with 2 way 5 / 6 amp F/T switch (Anchor penta /Gold medal / Kolor Kany.kom/ Havells or equivalent make as approved by the Deptt.).Medium point up to 6.00 meter. Length.

Wiring for drawing sub - main line with p.v.c insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved the Deptt.) in surface flat ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast / polycab / MW or Equivalent make as approved by the Deptt.) system including earth continuity With 3 x 2.5 sq. mm. + earth continuity with 2 x 1.5 sq. mm. in flat 19 mm ISI marked casing ‘n’ capping system.

With 3 x 4 sq. mm. + earth continuity with 2 x 2.5 sq.mm. cable in flat 19 mm ISI marked casing ‘n’ capping system.

With 3 x 6 sq. mm. + earth continuity with 2 x 4 sq.mm. cable in flat 25 mm ISI marked casing ‘n’ capping system.

Wiring for 5 pin 6 amp plug with 1.5 sq. mm. P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta/ Gold medal/Kolor kany .kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta/ Gold medal/Kolor kany .kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd Pin of the socket as required on the switch board in flat ISI marked casing ‘n’ capping system, when fitted on same board of light and fan.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grounting nuts & bolts as reqd. complete with making necessary connection as approved ,specified and directed by the deptt. (ABB ,Schneider MG, legrand , Hager make) For 100A 3P/4P MCCB

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and electronic ballast with 1x36 watt Fluorescent tube with Power Lux Lamp .

Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories down rod, canopy etc. of following sweeps with making necessary connections as approved by the Deptt. As required complete Premium model 1400mm Sweep

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 in foundation bed for footing , steps, walls, brick work etc. as directed & specified including curing complete (shuttering where necessary shall be measured & paid separately). a)In prop.1cement: 3 sand : 6 coarse agg. by volume

Providing soling in foundation and under floor at all levels with jhama bricks, sand packed and laid to level including all labour and materials complete. (a)

Providing and laying plain /reinforced cement concrete work in prop. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg ) 20 mm down including curing complete but excluding down including curing complete but excluding cost of form work and reinforcement for rein-forced cement concrete work in (form work and reinforcement will be measured and paid separately)

Providing and laying 25 mm thick damp proof coarse with cement concrete in prop. 1 : 2 : 4 with graded stone agg. of 10 mm down nominal size including providing approve damp proof admixture in prop. As recommended by the manufacture including curing etc. complete as directed.

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering & propping etc height of propping & centering below supporting floor to ceiling not exceeding 4mm & removal of the same for in-situ reinforced & plain concrete work

65mm thk. cement concrete floor consisting of 50mm under layer of cement concrete1:3:6 and 15mm thk. wearing layer in cement concrete1:1:2 finished with floating coat of neat cement including curing etc. complete as directed

230 tk Brick work in cement mortar with 1 st class brick including racking out joints and curing complete as directed in sub-structured up-to plinth level.

112mm thick 1 st class brick nogged wall in cement morter embeded with protruding rod n column including racking out joints and curing complete as directed in superstructure above plinth up to roof level ( protruding M.S. seperately under relevant item of steel work. a) In cement morter in prop. 1 : 4

20mm thick cement plaster in two coats backing coat 15mm & finishing coat 5mm thick on rough side of single of half brick wall for interior plastering upto 1st floor level including arises internal rounded angles , chamber & / or rounded angles not exceeding 80mm in grith &finished even & smooth including curing complete as directed .(b) In cement mortar 1: 4

Wall painting (two coats) with plastic emulsion paint approved brand and manufacture (Asain paint/ Berger paint / Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand pappered smooth.(a) Plastic emulsion paint

Supplying , fitting and fixing in position reinforcement bars conforming to relevant I .S. code for R .C .C. work / R .B. walling …………….a)High yielding deformed bars /tour steel

Providing vitrified tiles of approved quality size of H&R Johnson India ltd. on floors, walls over cement mortar bed in prop.1:3 including cutting where necessary finished with flush pointing with fix a tile white cement slurry …………........f) Nitco made

Providing, fitting and fixing vitreoous china pedestal type water closet (Indian type) a) White

Providing, fitting and fixing PVC Flushing Cistern ……….a) (ii)

Supplying , fitting and fixing PVC pipe of ISI approved including joining, fitting and fixing etc. (A) Econcealed (a) 50mm

Supplying , fitting and fixing PVC pipe of ISI approved including joining, fitting and fixing etc. (xii) 160mm

Providing, fitting and fixing pillar cock

Supplying , fitting and fixing wash basin

Providing &laying plain/ reinforced cement concrete work in prop.1 : 2 : 4 (1 cement :2 coarse sand 4 graded stone agg.) 20mm concrete work in prop.1 : 2 : 4 (1 cement :2 coarse sand 4 graded stone agg.) 20mm down including curing complete but exclu-ding cost of form work & reinforced cement concrete work in (form work & reinforcement will be measured & paid seperately ). In super structure form plinth level ii) Column pillars posts, struts, suspended

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering & propping etc height of propping & centering below supporting floor to ceiling not exceeding 4mm & removal of the same for in-situ reinforced & plain concrete work B ) In superstructure from plinth level Columns

112mm thick 1 st class brick nogged wall in cement morter embeded with protruding rod n column including racking out joints and curing complete as directed in superstructure above plinth up to roof level ( protruding M.S. rod / Torsteel will be measured and paid for seperately under relevant item of steel work. a) In cement morter in prop. 1 : 4

20mm thick cement plaster in two coats backing coat 15mm & finishing coat 5mm thick on rough side of single of half brick wall for interior plastering upto 1st floor level including arises internal rounded angles , chamber & / or rounded angles not exceeding 80mm in grith &finished even & smooth including curing complete as directed .(b) In cement mortar 1: 4

Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard sections without horizontal glazing bars , joints mitred and welded and p-roviding and fixing handles , angle cleat, rubber gusket etc. as required complete as specified.

Providing fitting and fixing fully glazed window without intermediate sash bars including oxidized MS butt hings

Painting two coats on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand pappering and stopping . i)b) high gloss

Providing, fitting and fixing M.S. Grills of required pattern for opening with M.S. flat at required spacing and frame all around square, or round M.S. bars with round headed bolts and nut or screws. II) Ornamental grill i) Fixed to wooden frame

Painting two coats on new steel surfaces with enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand pappering and stopping . i)b) high gloss

Brick on flat platform with 1st class brick including 15mm thk. Cement plastering with a floating coat of neat cement finish

230 tk Brick work in cement mortar with 1 st class brick including racking out joints and curing complete as directed

Applying one self priming coat of acrylic emulsion coating of Unicem “Rakshak” brand by thinning 1 ltrs. Of water over freshly plastered wall surface after thoroughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand pappered smooth as specified and directed .

Finishing wall with two coat of acrylic emulsion exterior coatings of Unicern “Rakshak” brand of required shade by thinning 1 ltr. Of paint with 750ml of water to give an even shade after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified.

18mm thk. Marble stone slab flooring on platform laid over 20mm thick base of cement plaster

Supplying , fitting and fixing in position reinforcement bars conforming to relevant I .S. code for R .C .C. work / R .B. walling……... In position with proper blocks, supports ,`G annealed blacks , wire and placingChairs , spacers etc. complete. (Upto 1st a)High yielding deformed bars /tour steel

Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels.(i)Partly 6mm thick glass panes and 12mm prelaminated ply board

Providing, fitting and fixing factory made exterior type fully panelled single leaf door shutters of approved brand conforming to relevent I.S code having kiln seasoned and vacuum pressure treated Hollock / Bonsum / Sundi rail and styles with pannel of Anchor brand 12mm thick veneered Teak wood particle board bonded with phenol - formaldehyde synthetic resin adhesive conforming to relevent I.S code including 4 nos of oxidised iron butt hinges (100mm x75 mm x3.55mm) to each leaf complete. (iii) 30mm thick

ELECTRIFICATION WORKS : Wiring for light/fan/call bell point with 2x1.5sq mm P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast / polycab/ MW or Equivalent make as approved by the Deptt.)in Surface system, including 6 Amp flush type switch/ bell push (Anchor penta / Gold meda l/ Kolor kany .kom/ Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with Phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/ Kolor Kany.com / Havells or equivalent make as approved by the Deptt.)etc. complete as directed and specified by the Deptt. Long point up to10.00 meter. Length

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and electronic ballast with 1x36 watt Fluorescent tube with Power Lux Lamp .

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 in foundation bed for footing , steps, walls, brick work etc. as directed & specified including curing complete (shuttering where necessary shall be measured & paid separately). a)In prop.1cement: 3 sand : 6 coarse agg. by volume

Providing soling in foundation and under floor at all levels with jhama bricks, sand packed and laid to level including all labour and materials complete. (a)

Providing &laying plain/ reinforced cement concrete work in prop.1 : 2 : 4 (1 cement :2 coarse sand 4 graded stone agg.) 20mm down including curing complete but exclu-ding cost of form work & reinforced cement concrete work in (form work & reinforcement will be measured & paid seperately ).

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering & propping etc height of propping & centering below supporting floor to ceiling not exceeding 4mm & removal of the same for in-situ reinforced & plain concrete work

230 tk Brick work in cement mortar with 1 st class brick including racking out joints and curing complete as directed in sub-structured up-to plinth level.

112mm thick 1 st class brick nogged wall in cement morter embeded with protruding rod n column including racking out joints and curing complete as directed in superstructure above plinth up to roof level ( protruding M.S. rod / Torsteel will be measured and paid for seperately under relevant item of steel work. a) In cement morter in prop. 1 : 4

20mm thick cement plaster in two coats backing coat 15mm & finishing coat 5mm thick on rough side of single of half brick wall for interior plastering upto 1st floor level including arises internal rounded angles , chamber & / or rounded angles not exceeding 80mm in grith &finished even & smooth including curing complete as directed .(b) In cement mortar 1: 4

Providing surface preparation for walls, ceiling etc. using average 1.50mmthk. plaster of paris including clearing, rubbing…Wall painting (two coats) with plastic emulsion paint approved brand and manufacture (Asain paint/ Berger paint / Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand pappered smooth.

(a) Plastic emulsion paint

Supplying , fitting and fixing in position reinforcement bars conforming to relevant I .S. code for R .C .C. work / R .B. walling Including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with G annealed blacks , wire and placing In position with proper blocks, supports ,`Chairs , spacers etc. complete. (Upto 1st a)High yielding deformed bars /tour steel

Providing, fitting and fixing anodized aluminium partition walls of standard section of approved brand. (i) 6mm thick panes and 12mm prelaminated Board.

Providing, fitting and fixing anodized aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodized aluminium frame made of 100mmx43mmx 2mm sections of approved brand..(i) 6mm thick panes and 12mm prelaminated

Providing, fitting and fixing anodized aluminium windows and ventilators of standard sections without horizontal glazing bars , joints mitred and welded and p-roviding and fixing handles , angle cleat, rubber gusket etc. as required complete as specified.a) side hung

Providing, fitting and fixing anodized aluminium sliding windows and ventilators of standard sections without horizontal glazing bars , joints mitred and welded and p-roviding and fixing handles , angle cleat, rubber gusket etc. as required complete as specified.a) 2 Track sliding window(i)

Providing, fitting and fixing M.S. Grills of required pattern for opening with M.S. flat at required spacing and frame all around square, or round M.S. bars with round headed bolts and nut or screws. II) Ornamental grill. i) Fixed to wooden frame

Providing wood work in frames(chowkats)of door , windows , clearstory windows & other similar works wrought, framed & fixed in position in contact with c.c or brick masonry walls including supplying fitting & fixing with nails screws, bolts & nuts complete with M .S . flat hold fast (40mm X 3mm X 25mm ) as per design & embeded in cement concrete block in prop.1:1: 4 & with 2 coats of kiricide oiling to the timber faces in contact with cement concrete & masonry as directed specified. a) Sal wood

Providing & fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band & face panels conforming to relevant I .S.iron but hings (100 X 75 X 3.5mm ) 6 nos with necessary wood screws a) decorative type face panel & block board core . i) 40 mm thick

Painting two coats on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand pappering and stopping . i)b) high gloss

Providing ceramic tiles of approved quality size of H&R Johnson India ltd. on floors,walls over cement mortar bed in prop.1:3 including cutting where necessary finished with flush pointing with fix a tile white cement slurry, mixed with approved pigment to match shade of tiles, complete at all levels as specified.

Providing vitrified tiles of approved quality size of H&R Johnson India ltd. on floors,walls over cement mortar bed in prop.1:3 including cutting where necessary finished with flush pointing with fix a tile white cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified. (i) 1200x1600

Providing polished vitrified wall tiles of approved quality size of H&R Johnson India ltd. on floors,walls over cement mortar bed in prop.1:3 including cutting where necessary finished with flush pointing with fix a tile white cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified. (i) 300x600

Supplying, fitting and fixing SoundSmooth MB Primer (NSS Primer) with glas wool of Anutone Acoustics Ltd. Including all fixtures and fittings. c) 25mm

Supplying, fitting and fixing MAC blinds as specified and directed. A) Vertical Blinds (a)i) 100mm

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners................etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). ................... fixed to ceiling section with 25mm long drywall

SANITARY AND WATER SUPPLY Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400 mm high ) with seat and lead, CP brass hinges and rubber buffers ,CI/MS brackets,40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Chistern to be paid separately) A) Parryware make.b) Coloured. i) Universal closet S Trap (Cat No.C0271) (Anglo Indian ) (inclusive of seat cover)

Supplying fitting and fixing PVC flushing cistern With all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc .complete as directed and specified (pipes will be measured Separately) With all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc .complete as directed and specified (pipes will be measured Separately) b) Coloured. i) Delux single flush ( Cat. No.C8091/C8057 )

Providing fitting and fixing vitreous china flat Back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.I) Parryware make. a) White.i) Integrated EFS-Smart DC(Cat. No.C8182 ) / Integrated EFS-Smart AC with power source (Cat No.C8195)

Providing vitreous china wash basin with CI/MS Brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (pillar cocks, stop cocks, waste coupling are to be paid separately. BASIN ( without pedestal )(A) Parryware Make. (a) White.(i) Duke 660x495 (Cat. No. C8416/27) (White/Coloured

Providing fitting and fixing Mirror with plastic frame of size 500x400 mm complete as directed and specified.

Providing , fitting and fixing recessed soap tray / soap dish complete as directed and specified. (A) Parryware Make (i) Recess SP & SG dish (Cat. No. C9935)

Providing ,fitting and fixing CP towel rail complete as directed and specified.A) Jaquar make (i) Continental 300mm for wash basin (Cat. No. ASN-1101N)

Providing ,fitting and fixing toilet paper holder complete as directed and specified. A) Jaquar make (i) Continental (Cat. No. ACN-1101N)

Supplying and fitting C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaquar make (a) Continental

Supplying, fitting and fixing I.S.I marked or similar approved H.C.I pipe including bolts and nuts and other fittings as required and complete at all levels including below G.L as directed and specified. (iii) 50mm dia.

Supplying fitting and fixing PVC pipes of 6 kg / cm2 (Supreme / Prince ) or other ISI approved Including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches.(i) 160mm dia.

b) Concealed by chiseling or breaking brick wall / C.C. /R.C.C and making good to the damages.(iii) 90mm dia

Construction of inspection pit inside measurement 450mmx450mmx450mm flush with 100mm diameter HCI / PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13 mm cement plaster in proportion 1:2 in side wall and floor. 450mmx450mm air tight C.I inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

ELECTRICAL WORKS: Wiring for light/fan/call bell point with 2x1.5sq mm P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast / polycab/ MW or Equivalent make as approved by the Deptt.)in Surface system, including 6 Amp flush type switch/ bell push (Anchor penta / Gold meda l/ Kolor kany .kom/ Havells or equivalent make as approved by the Deptt.) GI / MS switch board (ISI marked) half conceal on wall with Phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/ Kolor Kany.com / Havells or equivalent make as approved by the Deptt.)etc. complete as directed and specified by the Deptt.Short point up to 3.00 meter. Length.

Medium point up to 6.00 meter. Length.

Long point up to10.00 meter. Length.

Wiring to 5 a pin 6 Amp plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed Industrial ( Multistrand ) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex / RR Kabel or Equivalent make as approved by the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG / Precision /Presto Plast / polycab / MW or Equivalent make as approved by the Deptt.) in Surface system, including 5 pin 6 Amp flush type plug socket and 6 Amps F/T switch (Anchor penta / Gold medal / Kolor Kany.kom / Havells or equivalent make as approved by the Deptt.) GI / MS switch board ( I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq.mm. cable to third Pin of the plug socket etc. as required complete, when place elsewhere. Short point up to 3.00 meter. Length.

Medium point up to 6.00 meter. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4sq. mm. P.V.C insulated single core unsheathed Industrial ( Multistrand ) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent make as approved by the Deptt.) with Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast /polycab /MW or Equivalent make as approved by the Deptt.) in Surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta/ Gold medal /Kolor kany. Kom / Havells or equivalent make as approved by the Deptt.)GI/MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 2.5 sq.mm. cable to the 3rd Pin of the socket as required complete. Short point up to 3.00 meter. Length.

Medium point up to 6.00 meter. Length.

Long point up to10.00 meter. Length.

Wiring for twin control light point with 1.5 sq.mm P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex / RR Kabel or Equivalent make as approved the Deptt.) Flat 19mm ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast /polycab/MW or Equivalent make as approved by the Deptt.) system, with 2 way 5 / 6 amp F/T switch (Anchor penta /Gold medal / Kolor Kany.kom/ Havells or equivalent make as approved by the Deptt.).Medium point up to 6.00 meter. Length.

Wiring for drawing sub - main line with p.v.c insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved the Deptt.) in surface flat ISI marked casing ‘n’ capping (AKG/Precision /Presto Plast / polycab / MW or Equivalent make as approved by the Deptt.) system including earth continuity With 3 x 2.5 sq. mm. + earth continuity with 2 x 1.5 sq. mm. in flat 19 mm ISI marked casing ‘n’ capping system.

With 3 x 4 sq. mm. + earth continuity with 2 x 2.5 sq.mm. cable in flat 19 mm ISI marked casing ‘n’ capping system.

With 3 x 6 sq. mm. + earth continuity with 2 x 4 sq.mm. cable in flat 25 mm ISI marked casing ‘n’ capping system.

Wiring for 5 pin 6 amp plug with 1.5 sq. mm. P.V.C. insulated single core unsheathed Industrial (Multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta/ Gold medal/Kolor kany .kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta/ Gold medal/Kolor kany .kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd Pin of the socket as required on the switch board in flat ISI marked casing ‘n’ capping system, when fitted on same board of light and fan.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and electronic ballast with 1x36 watt Fluorescent tube with Power Lux Lamp .

Supplying including fitting and fixing of following A.C. exhaust fan complete with all accessories down rod, canopy etc. of following sweeps with making necessary connections as approved by the Deptt. As required complete . High speed 225mm sweep

Earth work in excavation for foundation trenches of walls, footing of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling dressing, watering and ramming etc. and removal of surplus earth with all lead and lift or directed and specified in following classification of soils including bailing out water where necessary as directed and specified i) Upto a depth of 2m below the existing ground level. a)In ordinary soil

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 in foundation bed for footing , steps, walls, brick work etc. as directed & specified including curing complete (shuttering where necessary shall be measured & paid separately). a)In prop.1cement: 3 sand : 6 coarse agg. by volume

Providing soling in foundation and under floor at all levels with jhama bricks, sand packed and laid to level including all labour and materials complete. (a)

230 tk Brick work in cement mortar with 1 st class brick including racking out joints and curing complete as directed in sub-structured up-to plinth level.

20mm thick cement plaster in single coat on fair side of brick/concrete wall for exterior plastering over walls upto a height of roof level above ground level including curing complete as directed (i)double coat plaster

Providing SUN ROCK HIGH CTS paver tiles of concrete grade M30 of approved quality

Earth filling

SRI MRIGEN DAS