REPAIR/REPLACEMENT OF ELECTRIC WIRING AND CONNECTED ACCESSORIES FITTINGS AND FIXTURES FOR MD ACCN OF CERTAIN BUILDINGS UNDER AGE E/M-II OF GE(N) MAMUN

Amount

Taking down carefully unserviceable copper/aluminium point wiring (light/fan/bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, bracket /sketch fitting etc and making good disturbed surfaces of walls , floors etc as per existing, complete all as specified and directed.

M&L for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 3x1.5 Sqmm, (earth wire connected to common earth dolly) drawn through and including 1.8 mm thick concealed PVC conduit, not less than 20 mm dia including all fittings viz tees, bends, junction boxes, 1.6 mm thick cadmium plated sunken GI pressed steel terminal boxes, 3 mm thick plastic laminated sheet cover fixed with brass screws for mounting switch/sockets sunken modular metal flush gang box with suitable support frame and cover plate (inner/outer) of required modules for mounting modular switch sockets complete including cutting chases for concealed wiring, making good disturbed surface of wall/floor with cement mortar 1: 3, to match existing surface, making connection of cable with MCBs through proper size copper/brass thimbles for one light/fan/bell point controlled by one 1 way switch.

All as per Srl item No 2 but for one light point controlled by two 2 way switch.

All as per Srl item No 2 but for 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Srl item No 2 but for 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per Srl item No. 02 above but one 15Amp socket point concealed with cable 3x2.5Sqmm

M & L for point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 3x1.5 Sqmm (earth wire connected to common earth dolly) drawn through existing conduit, with and including 1.6 mm thick cadmium plated sunken GI pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws for mounting switch/sockets or approved make sunken modular metal flush gang box and suitable support frame and cover plate (inner/outer) of required modules for mounting moular switch sockets complete connection of cable with MCBs through proper size copper/brass thimbles for one light/fan/bell point controlled by one 1 way switch complete all as specified and directed.

All as per Srl item No 6 but for one light point controlled by two 2 way switch.

All as per Srl item No 6 but for 5 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Srl item No 6 but for 5 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per Srl item No. 6 above but one 15Amp socket point concealed with cable 3x2.5Sqmm

S&F switch piano flush button single pole one way 5 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 amps, flush type, 240 volts complete all as specified and as directed.

S&F Socket outlet 2 in 1, 6 pin, 15/5 amps, flush type, 240 volts complete all as specified and as directed.

S&F switch 15 Amps, flush type with shutters, 240 volts complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and as directed.

S&F switch piano flush button single pole two way 5 amp 240 volts, complete all as specified and as directed.

S&F Bell push, flush type, 5 amp AC 230 Volt etc complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed.

S&F Lamp holder jumbo type, PVC/Polycarbonate type with back plate incl 12W LED lamp complete all as specified and as directed.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required drawn in and including non metallic PVC concealed conduit complete, cutting chases and making good to disturbed surface of wall/floor with cement mortar1:3 and finishes to match existing surface including Taking down carefully unserviceable copper/aluminium sub main wiring of any size including old broken steel/PVC conduit complete all as specified and directed:- 2x6.0 sq. mm + 1x 6 sq. mm earth wire, connected to earth dolly

S&F in replacement SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC having copper bus bar of rating 200Amps complete all as specified and directed.

S&F MCCB 3P 415V, 50Hz, 16 KA, 100 Amp complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA, 6 to 32 Amp complete all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA, 32 Amp complete all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA, 40-63 Amp complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA, 40 Amp complete all as specified and directed.

S&F sheet metal enclosures double door VTPN MCB DB 4 way 415 V AC, 50 Hz with 160Amps rated copper bus bar complete with IP 43, IK-09 protection suitable for flush mounting into the wall including MCCB 160Amps, 4P, 16kA with fixed magnetic and thermal setting of same make as of DB and making connection suitable size of aluminium thimbles, making good the disturbed surface to match with existing complete all as specified and directed.

S&F LED tube lights fitting 1x 20W, 220V, AC white powder coated CRCA box type channel alongwith LED T8 tubular lamp 20W linear with extruded aluminium/PC body and PC diffuser and inbuilt drive including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of LED Batten 4 FEET 1X18 watt, 6500 K, 230 volts wall mounted extruded thermoplastic body with PC diffuser in square shape complete with all accesssories internely pre wired and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of 20 watt T8 with high Lumen LED Tube with PC cover/PC body CR 1780, 6500K, PC/PC 4 FEET 230 volts including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED Bulk head (1x9)/(1 x 10) watt energy efficient wall mounted, pressure die cast aluminium housing & enclosed with poly carbonated cover with all accessories including lamp complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED mirror light, 1 x 10 watt, 2 feet prewired with all accessories including lamp tomplete with all accesssories internely pre wired and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED Building light 1x25 watt made out of pressure die-cast aluminium with polycarbonate LENS for cover IP65 protection including 32mm bore GI pipe bracted mounted using clamps, nuts bolts, washers, fastners etc. including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS.13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH Make : HPL or Equivalentnt of L&T/ABB

M&L for earthing complete with G .l earth plate electrode 60cmx 60cmx6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC 1:2:4, type B1, using 20 mm graded stone aggregate, mild steel frame made out of angle iron of size 40x40x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia light grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs complete all as specified and directed.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 29214.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

M/S SURINDER KUMAR MAHAJAN

M/S BHATIA CONSTRUCTION

KULBHUSHAN AGGARWAL

KONARK ENTERPRISES