Loading
Loading…
Loading…
Tender ID
Tender Value
₹46.4 L
EMD Value
₹92,735
Closing Date
5 Aug 2026, 12:00 pmClosed
Er. Ravinder Singh
Executive Engineer, Electrical Division No. 2, 1st Floor Additional Deluxe Building Sector- 9/D, Chandigarh.
As per NIT
2026_CHD_91790_1
E2/26/10
Open Tender
Electrical Works
Percentage
90 days
Chandigarh
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹92,735
Chandigarh
17 Sept 2026
17 Apr 2026
5 Aug 2026
17 Apr 2026
5 Aug 2026
23 Apr 2026
23 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DSR item No.26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modulesrequired for rated capacity). (Please refer DNIT for complete specification of item no.1) | |||||
| 1.01 | 200KVA (Each Power module shall be ≤ 50 KVA) | 1 | Each | - | - |
| 2DSR item No.4.1 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc. as required. | |||||
| 2.01 | 150 mm width X 50 mm depth X 1.6 mm thickness | 75 | PM | - | - |
| 2.02 | 375 mm width X 50 mm depth X 2.0 mm thickness | 15 | PM | - | - |
| 3DSR item No.2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) | |||||
| 3.01 | 4 way (4 + 12), Double door | 2 | Each | - | - |
| 3.02 | 12 way (4 + 36), Double door | 5 | Each | - | - |
| 4DSR item No.2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||||
| 4.01 | Single pole | 204 | Each | - | - |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.36 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 20.82 MB
BOQ_112302.xls
BOQ • 0.29 MB
10corr1.pdf
PDF • 0.47 MB
CORR10.pdf
PDF • 0.44 MB
10corr.pdf
PDF • 0.42 MB
10.pdf
PDF • 0.45 MB
10CORR.pdf
PDF • 0.43 MB
0010corr.pdf
PDF • 0.45 MB
10corr.pdf
PDF • 0.42 MB
10.pdf
PDF • 0.41 MB
010.pdf
PDF • 0.43 MB
10CORR.pdf
PDF • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .