Construction of New Cottages at Khanvel Forest Rest House Complex.

Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff at safe place as directed by engineer incharge.(B) Dense or Hard soil.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum.

Providing material & labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc. complete.

Providing material & labour for laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth(PCC Under Floor)

Providing material and labour for filling in plinth WITH UNSCREEN GRAVEL under floors including watering, ramming consolidating and dressing etc. complete.

Providing material and labour for laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing material and labour for laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(i) Having cross-sectional area 0.05 to 0.08 Sq.M upto plinth level.

Providing material and labour for laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M above plinth level.

Providing material and labour for laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(i) Having cross-sectional area 0.05 to 0.08 Sq.M upto plinth level.

Providing material and labour for laying controlled cement concrete M.250 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M above plinth level.

Providing material & labour for laying controlled Cement concrete M.200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in Lintels, upto floor two level.

Providing material & labour for laying controlled cement concrete M-200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Slabs, Landing, shelves, balconies, and Cantilever up to floor (Slab up to floor two level).

Providing material and labour for fixing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) to Plinth Lvl & curing complete.

Providing material & labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Super Structure up to floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand)& curing complete.

Providing material & labour for fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled.

Providing material & labour for fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing materail and labour for fixing 30 mm wire gauge shutters using galvanised M.S. wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia,for Doors, windows and clearstory windows including anodised alluminium butt hinges with necessary screws. (A) Indian teak wood for mosquito proof net shutter.

Providing materail and labour for fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete. with wooden louvers plank 12mm thick

Providing materail and labour for laying Marbo Grenite tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing material & labour for fixing 18mm thick Granite slab (18mm thick )1 side mirror polished premoulded and prepolished) machine cut for Platforms, vanity counters, door window, sills, jambs, soffits, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing , curing , moulding on all exposed edges and polishing to edge to give high gloss finish etc. complete at all levels.

Providing materail and labour for laying Marbo Grenite tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing material & labour for laying 24" x 24" Vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for dark shade.

Providing material & labour for P & L 24" x 24" vitrified 8 mm thick tile dedo over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing material & labour for 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:3 (1-cement:3-sand) & curing complete.

Providing material & labour for 20mm thick cement sand face plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing material & labour for fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (B) ORNAMENTAL GRILL .

Providing material & labour for Fixing tiles roofing with manglore tiles (with material & labour). As directed.

Providing material & labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete.

Providing material & labour for Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Providing material & labour for Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.

Providing material & labour for Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing material & labour for fixing steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Providing material & labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 50mm dia meter.

Providing material & labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 25mm.

Providing material & labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 15mm diameter .

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia.( Square sze) of branded quality.

Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (ii) 20mm dia. of branded quality.

Providing & fixing pillar tap (15mm dia) (long nose cock) & approved quality (with material & labour). of branded & approved quality.

Providing and fixing brass screw down stop tap.(A) 15mm dia. of branded & approved quality.

Providing & fixing C.P. brass angle cock of 15mm dia. of branded & approved quality.

Providing material & labour for supplying in standard length ISI marked rigid unplasticised PVC pipes suitable for portable water with ring fit joint including cost of rings as per IS specification No. 4985 / 1988 including all local and centra taxes, transportation, freight charges octroi inspection charges, loading, unloading conveyance to the departemntal strores and including cost of jointing materials etc, compelete for following dia and ring fit type pipe including lowering, laying and jointing PVC pipe and specials of following class and diameters including cost of labours materials except cement solvent giving satisfactory hyraulic testing as per ISI code etc. complete 180 mm dia test pressure 6 Kg / cm2.

Providing material & labour for Construction of B.B. Masonary Kundi of clear inside dimension size 0.60M x 0.60M x 0.90M with 23cm thick B.B. masonary wall in C:M 1:6 including required excavation, C.C. 1:4:8 15cms. Thick refilling 12mm thick cement plaster to masonary and floor C.C. layer and fixing thepre cast R.C.C. cover of Circular shape 500 mm internal diameter With frame etc. complete.

Providing material & labour for sock pit of 5.00 Cu.M Volume including excavating and filling brickbats with dry masonry work at top for 45cm. Height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed.

Providing material and labour for making Black Granite stone Counter Wash Basin of 0.60mt wide with vertical & Horizontal Support of granite stone and having bottom slab of 25mm to 30mm thick kadappa stone fixing with cement motar 1:4 (1 Cement :4fine sand) and neat cement slurry as per requirement including cutting the granite stone & providing 7 fixing oval shape wash basin of 22''x16" size white colour in line & level. All exposed Edges of granite should be moulded including all accessories like pillar cock (Swan neck type), fexible inlet pipe 15mm dia, C.P. brass waste coupling 32mm, PVC Waste pipe 32mm etc. as directed by Enginner on Charge.

Providing material & labour for fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) including Seal and Black plastic seal and cover with C.P brass hinge and rubeer buffers A )vitreous China Pattern :(i) in white. of good & branded quality.

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the following nominal size.(B) 75mm dia.

Providing material & labour for fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. of good quality.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing material & labour for fixing towel rack (big size) of brabded & good quality.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

providing & fixing mixer cock/diverter in position approved quality as directed (25mm dia). Of branded & good quality.

Providing material & labour for laying water proofing over RCC Slab consisting first layer of special water proofing comound 1kg/10Sq.m. mixed with cement alurry sparaded over maked slab second layer of levelling course of C.M. 1:2 ( 1 Cement: 2 Fine Sand) of 25 mm (av) bed thickness.Third layer consisting or brick aggregates of 100mm(av) thickness mix with 50% cement mortar in cm. 1:2 with cement slurry mix above water proofing compound an top smooth finished with trowel with fakse chequre making 30m in size the treat cement is to be carried along with the vertical surface of the parapet and other joint upto height of about 300mm in a shape of quarter.

Providing and fixing in position cowl vent to pipes (100mmdia).

Providing material & labour for fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. Of branded quality.

Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia.

Providing and fixing Rubber plug for sink or wash basin.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

Providing and mixing water proofing material in Cement concrete in mix proportion recommended by the manufacturers (for slab only).

Providing material & labour for fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour Jaguar, Hindware,Cera, Parrywar Roca or Neycer Make.

Providing material & labour for Applying two coats of acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing material and labour for laying PLINTH PROTECTION including excavation of 30 cm depth and Filling with dry bricks bats of 20 cm thick and top layers C.C. 1:2:4 ( 1 cement 2 coarse sand: 4 graded stone aggregate 20m nominal size) finished in proper grade and slop etc. complete.

Providing and laying chequered precast cement concrete tiles 22mm thick with aggegate of sizes upto 6mm in floors, treads of steps and landings on 20mm thick bed of C.M. 1:6 (1-cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand) joint with neat cement slurry with pigments to match the shade of the tiles.

Providing material & labour for fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerincharge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing hand spray of branded & good approved quality.

Providing and fixing toilet paper holder.(A) C.P. Brass.

Providing material & labour for fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

N.P.PATEL AND CO.

Rajrath Construction

S K PARMAR

M/S. V.S.KOTADIA

M/S Jai Shri New Chamunda Construction Co