Renovation of Guest Rooms in Terminal Building at Imphal International Airport

Amount

Providing and laying double charged, digital High Gloss Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 1200x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing & fixing in position Phenol bonded Bamboowood in wall skirting with planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded polyethylene foam sheets having 40kg/cum density over prepared surface. The bamboowood planks shall have minimum density of 1000Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres

Providing & fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutters for doors windows, clerestorey windows with pre-molded 30mm thick planks, in approved colours, texture & finishe. It shall have 10mm wide, 25mm deep grove to fit in panels.The bamboo wood shall have minimum density of 1000 Kg/ cum, minimum Hardness 1000 Kgf. All styles and rails shall have profiled interlocking system locked in place by bamboo pins, all complete as per direction of Engineer in charge. (The panelling will be paid for separately).

Providing & fixing in position Phenol bonded Bamboowood panelling of 10mm thick, in 25 to 40 mm thick panelled or panelled & glazed shutters for doors, windows, clerestorey windows, in approved colour, texture & finish. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. The panels shall have profiled interlocking system locked in place with bamboo pins all complete as per direction of the Engineer in-charge. (area of opening for panel inserts excluding portion inside grooves or rebates to be measured)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling of wash basin/urinal/ EWC/IWC etc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead complete as per direction & satisfaction of Engineer in charge.

Dismantling of pillar cock, bottle trap, stop cock, bib cock,towel rod,water mixer, shower rose, health faucets etc. and connecting fittings including stacking of useful materials near the site and disposal of unserviceable materials within 50 mtrs lead complete as per direction & satisfaction of Engineer in charge.

Providing and fixing wash basin (Kohler/American Standard or equivalent) with Dash fasteners, 32 mm C.P. brass waste of standard pattern, including painting of fittings, cutting and making good the walls wherever require: [ For tendering purpose ,wash basin of Memoirs Series K-2241IN-1-0 and waste coupling K-45433IN-CP of Kohler is Considered ]

Providing and fixing CP Brass Single lever telephonic wall mixer (Kohler/American Standard or equivalent) of quality & make as approved by Engineer in charge. [ For tendering purpose ,wall mixer K-98755IN-4-CP and waste coupling K-45433IN-CP of Kohler is Considered ]

Providing and fixing CP Brass Bottle Trap (Kohler/American Standard or equivalent) of approved quality & make and as per the direction of Engineer-in-charge. [ For tendering purpose Bottle trap of complementary Series K-7314IN-CP of Kohler is Considered ]

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder (Kohler/American Standard or equivalent) all complete as per the direction and satisfaction of Engineer-in-charge. For Tendering Purpose K 5633IN-CP of Kohler is considered.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet (Kohler/American Standard or equivalent) of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. [ For tendering purpose , Ove K-17629IN-SM-0 of Kohler is Considered ]

Providing and fixing liquid soap container (Kohler/American Standard or equivalent) distant from wall of standard shape with fasteners of the same materials with snap fittings of approved quality and colour complete as per satisfaction of Engineer In Charge. [ For tendering purpose ,K-10712D-CP of Kohler is Considered ]

Providing and fixing towel ring (Kohler/American Standard or equivalent) with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose ,K-5630IN-CP of Kohler is Considered ]

Providing and fixing Hand Shower (Health Faucet) with metal hose & Wall Hook (Kohler/American Standard or equivalent) all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose ,K-12927IN-CP of Kohler is Considered ]

Providing and fixing Glass Shelf (Kohler/American Standard or equivalent) all complete all complete as per satisfaction of Engineering-In-Charge. [ For tendering purpose ,K-5636IN-CP of Kohler is Considered ]

Providing and fixing Square Stainless Steel Bathroom Floor Water Drain Grating (Floor jali) (Kohler/American Standard or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-7275IN-CP of Kohler is Considered ]

Providing and fixing Towel Shelf (Kohler/American Standard or equivalent)all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-25066IN-CP of Kohler is Considered ]

Providing and fixing Robe Hook (Kohler/American Standard or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-25073IN-CP of Kohler is Considered ]

Providing and fixing Tooth Brush Holder (Kohler/American Standard or equivalent) all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,K-5637IN-CP of Kohler is Considered ]

Taking out concealed G.I. pipes, manually / by mechanical means including stacking of pipes within 50 metres lead all complete as per direction & satisfaction of Engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing following sanitary fittings of approved make, complete in all respect as per direction & satisfaction of Engineer in charge. Brass elbow/ Socket/Tee (Male & Female) 20 mm - 15 mm Brass thread

Providing and fixing Overhead Shower rose with wall mount shower arm (Kohler/American Standard or equivalent) all complete as per direction and satisfaction of enginnering in charge. [ For tendering purpose ,Shower rose K-73199IN-CP and wall mount shower arm K-20138IN-CP of Kohler is Considered ]

Providing and fixing C.P. Bib cock (Kohler/American Standard or equivalent) of approved quality conforming to IS standards all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Bib Cock K 20073IN-4-CP of Kohler is considered]

Providing and fixing C.P. brass stop cock (concealed)(Kohler/American Standard or equivalent) of standard design conforming to IS:8931. all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Concealed valve K-16087IN-4-CP of Kohler is considered]

Providing and fixing C.P. brass angle valve (Kohler/American Standard or equivalent) for basin mixer and geyser points of approved quality conforming to IS:8931 all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,Angle valve K-23515IN-4-CP of Kohler is considered]

Providing and fixing soap Dish Holder (Kohler/American Standard or equivalent) with concealed fitting arrangements of approved quality all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,soap dish K-25068IN-CP of Kohler is considered]

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness

Providing and fixing pillar cock (Kohler/American Standard or equivalent) of approved quality all complete as per direction and satisfaction of Engineer In Charge. [ For tendering purpose ,pillar cock K-23475IN-4-CP of Kohler is considered]

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

OTTOCENTO (Velvet Finish)- Providing and applying OTTOCENTO vapour permeable water based special two-tone velvet tapestry finish of interior grade, made up of special metalic pigment by OIKOS India or equivalent, after the cleaning surface and removing any loose of flacking materials, apply two coat of OTTOCENTO special effect finish by OIKOS India or equivalent on two coat of Ultrasatin base coat by OIKOS India or equivalent over on one coat of quartz primer by OIKOS India or equivalent in approved colour and shade to achieve desired finish, excluding the cost of surface preperation and scaffolding, apply by appropriate tools of OIKOS India or equivalent, all complete as per manufacturer's specification with the direction of Engineer-in-Charge. Approved make-OIKOS INDIA or equivalent.

Credit for taking away dismentaled wash basin / urinal / EWC / IWC etc. complete as per direction & satisfaction of Engineer in charge.

Credit for taking away of C.P. brass bib cock, stop cock, long body bib cock, long Eache bib cock, angle valve, ball valve, close hole basin mixer, C.P. waste in basin/ sink and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/measured before removing from the site in the presence of Engineer-in-charge or his authorised representative complete as per direction & satisfaction of Engineer-in-charge.

Credit for taking away dismentaled doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete as per direction of Engineer in charge.

Credit for taking away of SCI pipe fitting, centrifugal cast (spun)/sand cast iron pipes and fittings, C.I. flushing cistern, G.I. pipes and fittings, steel doors, window, ventilators, grill, round or square bars, M.S. sections etc. and the like item received from dismantling. The material so received shall be the property of contractor after dismantling duly weighed/ measured before removing from the site in the presence of Engineer-in-charge or his authorised representative complete as per direction & satisfaction of Engineer-in-charge.

Credit items taking out dismantle/obsolete false ceiling i/c board, frame section etc. outisde Airport Premises as per direction and satisfaction of EIC

Proficio Engineering And Construction Pvt. Ltd.

M/S Eastern Rise

Fermium Constructions LLP

Thokchom Okendro Singh

DTASSOCIATES

M/S ZELIZHU AND SONS

Nabalok Das

Aakar Infra Engineers Pvt Ltd