CA No. CWE SGNR/TOKEN-06 OF 2023-24 MAINT/ REPAIR OF BITUMINOUS ROAD, BERM AND MISC ITEMS IN OTM LOCATION AT FARIDKOT MIL STN

Amount

M&L for repair to pot holes exceeding 30mm depth, n. exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc; cutting around edges to atleast 25mm in depth, making good by filling in screed & graded road material, watering applying evenly a tack coat with bituminous primer (VG-10) @ 5Kg/10Sqm, putting in 30mm thick premixed semi dense asphaltic concrete and sealed with binder 9.8 Kg per 10 Sqm, binding with 0.09 cum of stone chipping the top level of existing road, well rammed and compacted with 8 to 12 tonne power roller (Including supply of premixed macadam binder & Chipping), complete all as specified and directed by Engineer-in-Charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer (VG-10) @ 5.0 Kg/10 Sqm on bituminous surface and laying 30mm thick (consolidated thickness bituminous premix semi dence asphaltic concrete with 5.5% binder content (VG-30) by weight of total mix, laid with self propelled mechanical paver finisher, rolled and compacted to required camber and gradient with power roller complete all as specified and directed by Engr-in-Charge.

Scarifying or picking gravelled macadam or bituminous macadam surface power or by hand picking to a depth exceeding 50 mm and not exceeding 100 mm and area not exceeding 400 Sqm in one stretch including racking over and grading the broken up surfaces to the proper camber etc as required complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregate (using granite, trap or basalt) of grading 2(63 to 40mm size) spread, rolled and consolidated to required camber and gradient using 8 to 12 tonne power roller complete all as specified and directed by Engr-in-charge.

M&L for preparation of water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweepig with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumeneous primer VG-10 grade @ 10 Kg per Ten Sqm on water bound macadum surface complete all as specified and directed by Engr-in-charge.

M&L for providing premixed bituminous macadam (compated thickness 75mm or less) using 4% binder content (VG-30) by weight of total mix laid with self propelled mechanical paver finisher rolled and consolidated to required gradient and camber complete all as specified and directed by Engineer in charge.

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking (White/Yellow) paint with 8% glass beads using special applicator machine with heating arrangement up to 160 Centigrade complete All as specified and directed by Engineer-in-Charge. Make :- Shivalic, Kothari, Jyanti, Swastic.

Demollition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris and rubbish to a distance not exceeding 100 mtr complete all as specified and directed by Engineer in charge.

M & L for providing 100mm thick plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregates as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundation including watering and consolidation complete All as specified and directed by Engineer-in-Charge.

Demollition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floor, skirting etc complete all as specified and directed by Engineer-in-Charge.

M&L for 80mm thick, M-40 Grade machine pressed precast concrete interlocking paver block with grey cement and pigment (coloured tiles with glossy finish) of any shape and size confirming to IS 15658-2006 complete all as specified and directed by Engineer-in-Charge.

Fixing only 80mm thick, M-40 Grade machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 complete all as specified and directed by Engineer-in-Charge. Note: Interlocking paver block retrieved from item No 11 shall be used.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates as in benching for manholes, bands, coping, bed plates including slightly rounded or chamfered angles including necessary formwork complete as in side of breakers etc incl necessary formwork all as specified and directed by Engineer in Charge.

M & L for factory made pre-cast cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate as in kerb stone of any size including necessary form work with plain fair faces, including chamfers, weatherings, throating etc set in cement mortar (1:4) with joints to match for path edging etc; embedded in position including all necessary excavation, tamping ground around blocks and removal of rebbish/ surplus soil etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation new concrete surface bricks surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed by Engr-in-charge.

M&L for supplying approved earth from outside MOD land and including raising (or lowering) earth, spreading in layers n.exc 30 cm thick watering , ramming/rolling and finishing to required size, shape n.exc 1.5m high from base complete as in berm filling all as specified and directed by Engineer-in-charge.

Supplying and fixing in replacement MS round delineator 50 mm dia and 700 mm long having 2 no 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50 duly powder coated anti rust and anti theft steel net available in Red/White or Yellow and embedding the same in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, complete all as specified & directed by Engineer-in- charge. Note:- Size of PCC block for embedding delineator shall be 10cmx10cmx15cm and cost of the same is deemed to be included in the unit rate of item.

Supply and fixing in replacement Solar stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargable battery having view distance 1000 meters LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night and can bear upto 25 Ton load complete all as specified and directed by Engineer - in - Charge.

S&F in replacement plastic speed breaker (ABS material) of size 750mm x 250mmx 75mm with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and than fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time complete all as specified and directed by Engineer-in- charge.

S&F in replacement cat eye of dimension 8.10X11.56X1.7cm, plastic body having two ways reflector with resistant lens including fixing arrengement as per manufacturers instructions complete all as specified and directed by Engineer-in- charge.

S&F in replacement solar delinator with 6 LEDs of red / yellow colour house in plastic body with LEDs , solar cells, battery and light sensors well protected in poly carbonate sheet, device pretected with powder coated wire mesh cage, equiped with solar sysytem mounted over 50 mm dia steel tube post powder coated coated length 1000mm also having sheet foot to firm grip in the ground. the delinator to have additional reflective bands , equiped with solar system workable for 2-3 days (night) after full charge of 8-10 hours including excavation in any strata and embedding in PCC (1:3:6) type C1 of size 30cmX30cmX20cm etc including aluminium alloy polycorbonateed powder coated MS pipe of size 50 mm dia and 1000mm hight complete all as specified and directed by Engineer-in- charge.

S & F in replacement 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with PVC clamps complete all as specified and directed by Engr-in-charge.

Supplying and fixing in replacement 800 mm dia convex mirrior complete as per manufacturer instruction incl excavation, PCC etc complete all as specified and directed by Engr-in-charge. ---------------------------------------------------------------------------------------------- Note:- A sum of Rs. 52925.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 20 (Schedule of Credit) of Tender document

FAIR DEAL CONSTRUCTION CO

Kissan contractor and engg works

M/s Balvinder Singh Engineer and Contractors