REPAIRS TO JOINERY, MS GRILL, ROLLING SHUTTER STEEL DOOR AND CERTAIN B/R REPAIR ALLIED WORK IN OTM/MD ACCN OF DEPOT BN, RECORD OFFICE, CIW, TEO, MD ACCN OF AJIT VIHAR AND OFFR MD ACCN OF BEG AND CENTRE AREA UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.

Amount

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each etc complete all as specified and as directed.

Description all as item No 01 above but n.exc. 1.50 sqm each

Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified and as directed.

Taking down steel window / ventilator of any description n exc 1.8 sqm each. complete all as specified and as directed.

Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as mentioned below: Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete all as specified and as directed. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm MAKE :- (i) Anodized aluminium section : Jindal/Hindalco, Indalco (ii) Particle board : Novapan, Duratuff (iii) Glass : Saint, Gobain, Modi Guard, TATA

Supply and fix in repairs Aluminium excruded section body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.

Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.

Supply and fix for pressed steel door frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified and as directed.

Description all as per item no 09 above but size 125 x 60 mm

Material and labour for PCC 1:2:4 type B1 in door frame filling complete all as specified and as directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail, lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply and fix factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and chemically pressed of 2nd class hard wood complete all as specified and as directed.

Supply and fix flush shutter solid core 30 mm thick with block board core & ply wood face panels commercial type on both sides complete all as specified and as directed.

Supply and fix factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fix in repairs pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti complete all as specified and as directed.

Supply and fix anodised aluminium shutters as in partition, aluminium section weighing 0.55 kg/ m fixed in aluminium chowkhat frame of size 101.60x44.45x1.55 mm including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. including taking down of old partition complete all as specified and as directed.

Supply and fix strucural steel framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confirming to Fe 290 gde E 165 and including dimantling complete all as specified and as directed.

Supply and Fixing mild steel plain black sheet in steel gates and similar work 1.60mm thick cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upo mitred angles, etc as required and as directed.

Taking down old rolling shutter and refixing the rolling shutter on same position , incl having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts incl one coat of synthetic enamel paint over a coat of primer NOTE:- Parts replaced shall be measured and paid seperately

Supply only MS steel sheet 1.0mm thick complete all as specified and as directed.

Supply only spring suitable for rolling shutter complete all as specified and as directed.

Supply only MS safety lever locks with 4 levers for rolling shutter complete all as specified and as directed.

Supply only ball bearing for rolling shutter complete all as specified and as directed.

Supply only MS handles 150mm in size for rolling shutter complete all as specified and as directed.

Supply and fix in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.

Description all as per item no 28 above but Stainless steel butt hinges

Supply and fix 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed.

Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed.

Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed.

Supply and fix flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in hold fasts complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of redoxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth complete all as specified and as directed.

Supply and fix as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix 4 mm th sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix 4 mm th figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Material and labour for Framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined the windows complete all as specified and as directed.

Cutting holes in Brick/Block /stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick complete all as specified and as directed.

Supply and fix in repair Brass knobs 35-40 mm dia complete all as specified and as directed.

Supply and fix 250mm, ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified and as directed.

Material and labour Plywood, grade BWP, 12mm thick, type BB fixed with screws to timber frame work complete all as specified and as directed.

Material and labour for steel rolling shutters in repair, thickness of laths in 1.00mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, including taking of existing rolling shutter and taking in store, complete all as specified and directed.

Description all as per item no 47 above but as in gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply and fix for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, incl dismantling all complete all as specified and as directed.

Supply and fix stainless steel railling of SS-Grade 304 and height of Railling 3 Feet the design of railling as per direction and it is combination of 18 gauge Square, rectangular and circular pipes.The supports of railling are embedded in concrete of Grade B0 (1:2:4) using Crushed stone aggregate 12.50 mm embedded parts covered with SS material as per the design. The SS tubes/pipes as in Support having dia/Size 60mm to 100 mm and intermidiate design pipes are having dia or size 20mm to 60mm and all other necessary fittings and cover caps are also with same grade of material (SS-304). The end bars of railling should be shouldered / riveted or forged in railling, including dismantling of Existing railling, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed.

Material and labour for vitrified ceramic tiles 10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for vitrified coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete all as specified and as directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 450 X300 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.

Material and labour in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as as per direction of Engineer-in-Charge.

Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.

Material and labour for precast cement concrete block masonry using type C1, 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

Description all as per item no 60 above but except precast concrete blocks.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed.

Material and labour for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour rendering 15 mm thick in cement mortar (1:6) on fair faces of block masonry surfaces or fair faces of brick work complete all as specified and directed.

Material and labour for preparation new plastered surface of wall and applying two coats of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete.

Material and labour for preparing new plastered and applying two coat of cement based paint (any tint) over a coat of primer on walls complete all as specified and directed.

Supply and fix in repair laminated flooring oak wooden shade, width of laminate floor board is 193mm to 240mm and length of board is 1000mm to 1300mm over EPE foam with properly fix to the grooves given in the laminated sheets. Including all necessary locking patti at end of wall and window or door joints complete all as specified and directed.

DARSHAN ENTERPRISES (BID ID -3469846)

V.R.PRAJAPATI AND CO. (BID ID -3469735)

S P DEVELOPERS (BID ID -3470270)

S M MISHRA (BID ID -3470145)

Suraj Sukhdev More (BID ID -3469961)