39(W)/EDCH/2024-25

Amount

FOR VARIOUS ELECTRICITY LINE WORKS, AND REPARING OF POWER TRANSFORMAR WORKS IN BUSINESS PLAN 2024-25 PART-2 IN THE JURISDICTION OF EDD PILKHUWA HAPUR, UNDER EDC., HAPUR. (Third party inspection of the quality of all works will be conducted by the department.)

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with safe loading and unloading at both ends on Kachha Packka road, and proper staking as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km) (Any Damage during Transaction will be chargable auto contractor.)

Carriage of 11KV XLPE cable of verious size from Electricity store center, Hapur/J.E. Store to site of work with safe loading and unloading at both ends on Kachha Packka road, and proper staking as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km) (Any Damage during Transaction will be chargable auto contractor.)

Carriage of ST Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with safe loading and unloading at both ends on Kachha Packka road, and proper staking as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km) (Any Damage during Transaction will be chargable auto contractor.)

Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with safe loading and unloading at both ends on Kachha Packka road, and proper staking as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). (Any Damage during Transaction will be chargable auto contractor.)

Erection & Fixing of PCC Pole 8.5 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.(Except Pole all the clamp, Nuts & Bolts etc. by the contractor)

Erection & Fixing of STP Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge. .(Except Pole all the clamp, Nuts & Bolts etc. by the contractor)

Erection of double pole structure with all accessories on ST Pole 11 mtr. long, fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.(All accessories clamps and nuts & bolts will be provided by contrator)

Laying Trunchless 140 mm O/D PN-4PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground 11KV XLPE Cable as per RESPO/Norms, work including cost of above HDPE pipe, necessury T&P, Labour etc as per direction of site incharge.

Laying of 11 KV XLPE (3x300, 3x185, 3x120) Cable undergound though HDPE pipe and spare cable shall be left in the loop shape at both ends as per RESPO/Norms, as per direction of site incharge. (All necessury T&P, Labour etc will be provided by contractor)

Laying of 11 KV XLPE (3x300, 3x185, 3x120) Cable Overhead and spare cable shall be left in the loop shape at both ends as per RESPO/Norms, as per direction of site incharge. Work includes making of all type of clamps and brackets suitable for Laying of XLPE cable on ST Pole Support as pr norms. (Except Pole and cable porovided by contractor)

Making and filling of 11KV 3X300, 3X185, 3X120 Cable Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge.(Cable Jointing kit will be provided by the Department)

Fabrication & Fixing of T-Channel on pole by providing Holding Clamps, F-Clamps & Proper size nuts & bolts, as per RESPO/Norms and as per direction of site incharge.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.(all the stay set and stay wire will be provided by department)

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of 6SWG G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge. (Earth rod and GI wire will be provided by department)

Grouting of ST supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Grouting of PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow, and as per direction of site incharge. (only gurding angle and GI wire will be provided by the department)

Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO/Drawing Norms and as per direction of site incharge. (only weseal conductor will be provided by contrator)

Laying , Stringing and final sagging of ACSR Dog Conductor, as per RESPO/Drawing Norms and as per direction of site incharge.(Only Dog Conductor will be provided by department)

Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV 3X70 and 3x120Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.(except cable all the material will be provided by contractor)

Providing & Fixing of Danger Board,/ Number plate including clamp and nuts and bolts. All required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.

Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Erection of 11 KV Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms (Only 11KV Disc insulator with fitting with provided by the department)

Erection of 11 KV Pin insulator with Pin as per RESPO Drawing/Norms (Only 11KV Pin insulator with fitting with provided by the department)

Erection & fixing of 11 KV X arm on 11mtr STP/8.5m PCC single support as per nonms.( Except X-Arm all clamps and nuts & bolts will be provided by contractor)

Dismanteling of old and used XLPE cable form site and carrage of same from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Power T/F work

Repairing of 5/10MVA Power T/F by opening of top cover, conservator tank, inspaction cover, HT/LT bushing and radiator for replacing gasket sheet IS make of suitable size and fitting again after fixing of gasket sheet all parts of T/F tight and fitted again for stop of leakage from T/F safely. work include providing all requried meterial & T&P for above work, 11 KV & 33 KV HT bushing, bushing rod, will be provieded by contractor. (Any damage in T/F chargeable to contractor)

OM CONSTRUCTION COMPANY (BID ID -4742500)