GE/BAS-46/2021-22 SPECIAL REPAIR TO BLDG NO. T-17 (JCOS MESS) AT BASOLI GRN UNDER GE BASOLI AND JANGLOT.

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving any thickness (below or above ground level) complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each including taking out hold fast, complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and as directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, MS hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow portion of frame with plain cement concrete and fixing hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and as directed.

M&L factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 28 to 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm thick width stuck inside in solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing

S&F 18/19mm thick prelaminated decorative choice, printed PVC board (weight not less than 12 Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in cupboard/kitchen cabinet shutters fitting complete all as specified and as directed.

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and including 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: (i) Cutting holes for hold fast making good in cement mortar 1:3 and PCC 1:2:4, type B-1 shall be included in the quoted rates.

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3 mm thick frosted glass and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinted touch or galvanised wire staples, complete all as specified and as directed.

M&L for preparing for new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer, complete all as specified and as directed.

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm, complete all as specified and as directed.

S&F in repair, Hasp and staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hing plate and fixed with screw of 100 mm size complete all as specified.

S&F in repair, 100mm long butt hinges extruded aluminium alloy anodised and fixed, complete all as specified and as directed.

S&F in repair, Aluminium alloy handles (ISI marked), cast type, anodised of size 150mm and fixed, complete all as specified and as directed.

S&F in repair, Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

S&F in repair, 250 mm long,Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F in repair, 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified.

S&F in repair, harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc. complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including taking down cement plaster on brick or concrete surfaces in any description etc including racking out joints hacking for key scrubbing down with water etc all as specified.

M&L for Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including taking down cement plaster on brick or concrete surfaces in any description etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement as in ceiling including taking down cement plaster on brick or concrete surfaces in any description etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for two coats of cement base paint on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

M&L for providing wall putty finish,3mm thick on vertical surface of wall including preparation of surface and applying two coats of oil bound distemper (OBD) over one coat of primer complete all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified.

M & L for Preparing old surfaces of wall (plastered or unplstered) and applying one coat of cement base paint, complete all as specified.

M&L for Complete removal of existing treatment of old surface of wall (plastered or un plastered) applying 3mm thick wall care putty for smooth finishing and applying one coat of oil bound distember (OBD) with roller brush including preparation of surface, complete all as specified and as directed.

M&L for 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement, complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete including 10mm thick rendering in cement mortar 1:4, and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified.

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes,including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified.

M&L Granite (of any type), 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade, complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern), white, including connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc complete all as specified and as directed.

S&F in repaire plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin oval shape coloured of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia to be fixed in M S brackets complete all as specified.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls, complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls, complete all as specified and as directed.

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair, complete all as specified and as directed.

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair, complete all as specified and as directed.

S&F PVC (SWR) Vent cowl 110 mm bore in repair, complete all as specified and as directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair, complete all as specified and as directed.

S&F, Rotational moulded polyethelyne water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts including dismantling water tank of capacity exc. 500 Ltr & n.exc. 1000 Ltrs and removing to store complete all as specified.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe complete all as specified.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and as directed.

S&F in repairs stop cock (ISI marked) cast copper alloy chromium plated with crutch or butter fly handle higher pressure screwed both ends for iron pipe or for union bore pipe of 15mm dia, complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia, complete all as specified and as directed.

S&F in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and as directed.

S&F in replacement stop valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified.

S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste coupiling & waste pipe and fixed complete all as specified.

Supply and fixing in repair stainless steel plate rack 915 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws,washers, nut-bolts and necessary drilling etc.including making good to disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and as directed.

M&L 15 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittings and fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturded surfaces complete in all respect in cement mortar 1:4, including taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe from the site complete all as specified.

M&L 20 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittings and fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturded surfaces complete in all respect in cement mortar 1:4, including taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe from the site complete all as specified.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement, complete all as specified and as directed.

M&L Preparing new surfaces, plastered or unplastered of walll/facia/chajjas etc and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls, complete all as specified and as directed.

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old seze bricks built in cement mortar 1:4, including demolitiom of brick work, stone/boulder masonery built in cement motar incl all quoins, arches,pillars etccomplete all as specified.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings. as specified.

Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter of size 50x40x1.30 mm and glass pane 4 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including suitable aluminium handle, tower bolt hinges and aluminium grill not less than 6 mm dia fixed with frame complete all as specified and directed.

Supply and fix for natural colour anodised Aluminium Door shutters side hung type with safe bars locking rails locking arrangements and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle 150mm size etc and including 4mm thick sheet glass fitted type black in colour, size of lock rails 44.45x81.50mm side rails 85.85x44.45mm, top rail 83.5x44.45mm, bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete all as specified in MES SSR Part-I and as directed.

Dismantiling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 9mm thick ceiling panel laminated with PVC film on front face and foil back availavel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as specified.

M& L applying water proofing membrane APP (Atactic Polyprobhlene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986,over and including 20mm thick cement screed bad in CM (1:4) finished surface even and smooth without using extra cement, on prepared surfaces including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified.

Demolition of Brick (laid flat or on edge) or brick/concrete tiles as in floor (each layer) complete all as specified.

M&L for Durastone / Endura heavy duty vitrified tiles of size 322mm x 322mm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar over and including 75 mm thick PCC 1:3:6 type C-2 ( using 40mm graded stone aggregate) finished cement concrete surface fair & smooth without using extra cement complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with PVC terminal sunk boxes with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed. NOTE :- a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc all as directed.

All as per item No 73 but for one 3 pin 5 Amp socket outlet on independent board, complete all as specified and as directed.

All as per item No 73 but for one 3 pin 5 Amp socket outlet on same board.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as specified and directed

Supplying & Fixing Switch socket combination 2 in 1, 5 pin, 5 Amp flush type, complete all as specified and as directed. . Make :-C&S/Havells/polycab/Plaza

Supplying & Fixing socket outlet 5 amps 5 pin flush type, 230 volts, complete all as specified and directed by Engr-in-Charge.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as specified and directed . Make :-C&S/Havells/polycab/Plaza

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F in replacement LED tube light fitting 1x16w,230v including LED tube rod with polycarbonate diffuser, 4 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified

S&F in replacement LED tube light fitting 1x10w,230v including LED tube rod with polycarbonate diffuser, 2 feet fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings, complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and as directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service valu 6.00 BEE. Five Star rated with brushless direct current motor (BLDC) all as specified and directed.

S&F in replacmenet sheet metal powder coated vertical double door single pole and neutral (SPN) distribution board for MCB provision 230 Volts 50 Hz AC supply for 8 Way fitted with copper bus bar rated 200 Amps, neutral link, earth bar complete all as specified and as directed.

S&F MCB SPN 63 Amps with 10 KA Breakiing capacity of C series in distribution boards complete all as specified and dirrected.

S&F MCB SP 6-32 Amps with 10 KA Breakiing capacity of C series in distribution boards complete all as specified and dirrected.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate up to 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe up to main board, funnel with wire mesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 16 sqmm 2 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area are as under of Make- polycab/KEI/RPG

S&F DWC high density polyethelene pipes in replacement having 63/50outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed. Make -Trupati /Equivalent

S&F Single Door (SPN) DBs 02 way 220 V 50 Hz with MCB SPN 10 Amps 10 KA, complete all as specified and as directed.Make - Legrand /C&S / IndoAssian

Suppply and fixing Post top Lantern LED type 40 Watt 230 Volt AC Out door Type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp.

Supply and laying tubes, Medium grade 50 mm galvanised iron with all fitting complete all as specified and directed.

Om Sai Ram Builders

Ms Dalip Kumar and Co.

M/S VIJ CONSTRUCTION CO

Ms International Engineers

M/S HARBANS SINGH BEDI