REPAIR REPLACEMENT MAINTENANCE OF ELECTRICAL FITTINGS AND FIXTURES INCLUDING INTERNAL WIRING DISTRIBUTION SYSTEM IN RESTRICTED DOMESTIC AREA AT DGQA UNITS OF GCF VFJ AREA JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. (Note : (i) Taking down of light fittings any type will be measured separately. (ii) Conduit and accessories will not be dismantled on roof/floor).

M&L for point wiring with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including concealed PVC rigid non metalic conduit of size 19 mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc all as specified and directed for :- (Note:- (i) Cost for cutting chases and concealing the conduit pipe in existing wall is deemed to be included in the item rate quoted. (ii) Conduit will not be concealed in ceiling but fixed on ceiling surface only) (a) One light point/fan point controlled by one switch.

One switch socket combination out let 5 Amps on independent board.

One Call bell Point Controlled by one bell Push.

One socket out let 5 Amps on the same board with other switches.

All as per item No. 2 here-in-before but on surface PVC rigid non metalic conduit of size 19 mm for One light point/fan point/socket outlet 5 Amps independent point controlled by one switch.

All as per item No. 2 here-in-before but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board.

M&L for point wiring with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including surface stove enamelled steel conduit on ceiling/wall, with and including continuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc all as specified and directed for :- (Note : The work will be carried out inside workshop and length of the point wiring will be more than standard length due to higher height of roof. Contractor to visit the site and assess the requirement before quoting the rate). (a) One light point/fan point controlled by one switch.

All as per item No. 8 here-in-before but one switch socket combination out let 5 Amps on independent board.

All as per item No. 8 here-in-before but one socket out let 5 Amps on the same board with other switches.

All as per item No. 8 here-in-before but with 4 sqmm PVC insulated multi stranded copper conductor and 4 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board.

Supply & Fixing Modular type Switch single pole 6 Amps one way

Supply & Fixing Modular type Switch single pole 16 Amps one way

Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps.

Supply & Fixing Modular type Socket out let 6 Amps.

Supply & Fixing Modular type Bell Push single pole 6 Amps one way

Supply and fixing Bell, AC, Ding Dong type 230 Volt.

Supply and fixing Fan step type Regulator modular type, 120 watts, 230 Volt.

Supply and Fixing Ceiling Rose Surface PVC type 65 x 50 mm two to three terminals.

Supply and fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as directed.

Supply and fixing in repairs Energy efficient, flicker free, surface mounted LED luminaire 20 Watts, 230 Volt, eye certification biologically tested, 4 feet long, with acrylic diffuser, surge protection 3KV, complete with constant Current electronic driver and all accessories including connecting up with ceiling rose using twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. Make : Philips Cat No BN021LED20S PSU CW GRS2 or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply and fixing in repairs Security lighting luminaire for use with LED lamps, of capacity not less than 40 watts, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, IP-65 class of protection, complete with control gear and all accessories fixed with 25 mm bore Light grade GI Pipe Bracket 1.2 mtr long bent to shape, fixed on wall with MS Flat Clamps, nuts & Bolts as required complete all as speciifed. Make : Philips Cat No. BRP409 LED040CWHOMRFGS1PSUGR or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply & Fixing in repairs Surface mounted LED light fitting 1 x 10 watts (2 ft) with integrated electronic driver complete all accessories, prewired, including lamp and flexible wire twin core from ceiling rose to terminal block all as directed. Make : Phiips Cat No : BN021LED10S-6500PSUGRS1 or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply and fixing in repairs High Bay luminaire for use with LED lamps, of capacity not less than 120 Watts, 230 Volts, with high quality lenses & reflector, High grade aluminium pressure Die-Cast Housing with toughened glass cover, complete with control gear and all accessories including fixing accessories as required complete all as speciifed. Make : Philips Cat No. BY415P LED145S CW HE NB FG PSUGR XTFCLS5 or Equivelent make in Havells/Crompton/Bajaj/Wipro/ Surya Roshni Ltd.

Supply and fixing in repairs LED light fitting 36W, 230 Volt, 2' x 2' extruded aluminium housing, fully diffused high transmitive milky defuser, recessed mounting type, complete with all accessories all as directed. (Make : Philips Cat No. RC380B LED36S-6500 G4 L60 W60 PSU OD or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply and fixing in repairs LED light fitting 42W, 230 Volt, 2' x 2' extruded aluminium housing, fully diffused high transmitive milky defuser, recessed mounting type, complete with all accessories all as directed. (Make : Philips Cat No. RC380B LED42S-6500 G4 L60 W60 PSU OD or Equivelent make in Havells/Crompton/Bajaj/ Wipro/Surya Roshni Ltd.

Supply and fixing in repairs LED Bulkhead, 6 Watts, 230 Volt complete with all accessories, internally pre -wired with 3 core flexible 16/0.2 mm copper conductor cable connection. Make : Philips Cat No. WT202W LED6S CW PSU S2 PC or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply and fixing in repairs LED light fitting 20 watts, 230 volts, surfacce mounting round slim down lighter, with HP LED decorative type, complete with all accessories, internally pre-wired including making connection with & including 3 core flexible 16/0.2 mm copper conductor cable of adequate length from connector/ ceiling rose to fitting. Make : Philips Cat No.SM251C LED 20S-6500 PSU WH or Equivelent make in Havells/Crompton/Bajaj/Wipro/Surya Roshni Ltd.

Supply and fix in repairs drivers suitable for 36/42/45 watts LED light fittings any type/make complete all as directed.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, TP & N, double door type, 440 Volt, suitable for MCCB incomer. (Note : MCCB and MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, TP & N, double door type, 440 Volt, suitable for MCCB incomer. (Note : MCCB and MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, TP & N, double door type, 440 Volt, suitable for MCB incomer. (Note : MCBs will be Measured separately)

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SP & N, double door type, 240 Volt. (Note : MCBs will be Measured separately)

S&F in repairs Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified and directed.

Supply and Fixing MCCB, four pole, 100 Amp, 415 Volt, of breaking capacity 16 KA.

Supply and Fixing MCB, TPN, 415 Volt of capacity 40 Amps, 10 KA.

Supply and Fixing MCB, SPN, 230 Volt of capacity 32 Amps, 10 KA.

Supply and Fixing Miniature circuit Breakers, single pole, 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA.

M&L for wiring with four single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sq mm in and including/drawing through through rigid non metalic PVC conduit including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. (Note :- 4x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

M&L for wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sq mm in and including/drawing through rigid non metalic PVC conduit including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth. (Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length)

Supply and fix in repairs MCCB, with sheet steel enclosure, AC, 415 V, four Pole, 100 Amps, 25 KA.

Taking down old unserviceable Sub main wiring with aluminium/copper conductor, any type/size complete with/without conduit and remove from site all as directed.

Taking down old unserviceable DBs/Main switches any type/size complete with all accessories and remove from site all as directed.

S&F in repairs Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 40 Amps, 415 Volt all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below ground level, connecting GI earth wire of size 4 mm dia from earth plate to body of the equipment by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15 mm bore GI light grade pipe for protection of earth lead from earth plate (6 mtrs long), 20 mm GI light grade watering pipe, PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in earhing pit, PCC cover, charcoal or coke & salt filling and necessary excavation and earth work and all other relevant works including testing all as specified and shown in electrical plate No.3 of MES Schedule part-I.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia GI Earth wire.

Supply fixing/connecting Static electronic electric energy meter, three phase, 415 volts AC, 50 Hz, of capacity 05 to 30 Amps, class 1.0 accuracy with LCD display including connecting the meter in the existing electrical system/cables and seal by means of sealing wire and lead including disconnecting/taking down u/s burnt energy meters from existing boards/boxes, deposit to E/M store complete all as directed. (Note : (a) Meter reading record shall be maintained before and after replacement.(b) Dismantled u/s energy meter shall be deposited to E/M store yard.)

Supply fixing/connecting Static electronic electric energy meter, Single phase, 230 volts AC, 50 Hz, of capacity 05 to 30 Amps, class 1.0 accuracy with LCD display including connecting the meter in the existing electrical system/cables and seal by means of sealing wire and lead including disconnecting/taking down u/s burnt energy meters from existing boards/boxes, deposit to E/M store complete all as directed. (Note : (a) Meter reading record shall be maintained before and after replacement.(b) Dismantled u/s energy meter shall be deposited to E/M store yard.)

Supply and laying in trenches/through pipes or bare in road crossings/paths /drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area 25 Sqmm 4 Core including taking out old unserviceable cable and remove from site all as specified and directed.

Goodluck Enterprises

TRISHLA CONSTRUCTIONS

M/S. HONEY CONSTRUCTIONS

Veer Brothers

ELCON

C L BHATIA

CUTCH CONSTRUCTION