Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.6 L+₹94,717.50 (5.08%)Rejected-Finance B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹19.9 L+₹1.3 L (6.96%)Rejected-Finance C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹20.5 L+₹1.9 L (10.2%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹24.3 L+₹5.7 L (30.5%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mathura
HQ CWE Mathura
As per Tender Documents
2022_MES_535820_1
CWE/MTR/W/ OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (West) Mathura
As per NIT
7 documents required · 7 mandatory
₹500
GE (West) Mathura
₹40,000
Yes
1 Sept 2022
5 Jul 2022
10 Aug 2022
5 Jul 2022
2 Aug 2022
19 Jul 2022
60 days
Amount
Excavating over areas n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
Excavation over area exc 1.5m but n.exc 3.0m deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.
Removal of surplus excavated soil to a distance n.exc 150mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concreate complete all as specified and directed.
M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6mtr mean radius, built in CM (1:4) complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for reinforced cement concrete (1:1:5:3) type A-1 grade nominal Mix ( using 20mm graded stone aggregate), as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, shelves, MS angle frame etc complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
M&L for reinforced cement concrete (1:1.5:3) type A-1 nominal Mix (using 20mm graded stone aggregate) as in beams, cantilevers, lintel complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
M&L for precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manholes cover slab with plain fair faces and set in cement mortar (1:4) complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L mild steel TMT bars as in reinforcement 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (wire) annealed not less than 0.9mm dia complete all as specified and directed.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing etc not exc 200 mm thick (horizantal or slopping) for fair finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to edges of concrete flats, treads breaks in floors, window cill concrete railling, opening in concrete walls floor and roof n.exc 20 cm wide and sides RCC / PCC band in walls horizontal and sloping and similar work with fair finished surface exc 10cm but not exc 20cm wide complete all as specified and directed.
M&L formwork (rough finished flat) to side and soffits of floor or roof beams, lintels, cantilevers shelves including supports etc complete all as specified and directed.
M&L for stone aggregate of gravel size 4 to 8mm complete all as specified and directed.
M&L for stone aggregate of gravel size 12mm complete all as specified and directed.
M&L for stone aggregate of gravel size 20mm complete all as specified and directed.
M&L for cement concrete (1:3:6) types C-2 (40mm graded stone aggregates) as in surface channels and drains and finish surface even and fair complete all as specified and directed.
M&L for drilling of vertical bore hole by rotary cum through direct hammering (DTH) technique in any type of strata consisting of 200mm dia drill bit from GL upto a depth as directed and getting out and disposal of spoil to a distance n.exc 250mtr complete all as specified and directed. (Depth of bore hole approx 70 RM). Note : (i) Taking the samples from the borewell cutting for every three mtr interval and every change in strata if less than 3 mtr. (ii) Preparation of litho logs based on these samples. (iii) Drill time to be prepared and prescribed. (iv) No payment against any bore shall be admissble if it is abandoned due to default of the contractor. (v) Nos & location and depth of bore hole shall be decided by GE.
S&F PVC pipe 150mm bore of pressure rating 6kg/Sqm including socket & lowering complete all as specified and directed.
S&F sloted PVC pipe 150mm bore of pressure rating 6kg/Sqm including socket & lowering complete all as specified and directed.
Supply laying & testing 200mm dia salt glazed stone ware drain pipes grade 'A' laid in trenches and jointed in cm 1:1 as specified complete all as specified and directed.
M&L for 300mm bore Reinforced concrete pipes class NP3 laid and jointed complete with collars in trenches complete all as specified and directed.
M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipe complete all as specified and directed.
M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm dia pipe complete all as specified and directed.
M&L for Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.
M&L for 75 mm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40 mm size) or grading 3 (50 to 20 mm size) spread, rolled and consolidated to required gradient, camber complete all as specified and directed.
M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and M&L for applying evenly a priming/ tack coat with bituminous primer VG-10 grade @ 10 Kg per 10 Sqm and bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .