REPAIR MAINT TO RIFLES RANGES DRAINS CULVERTS FENCING HARDSTANDING FOOTPATH COMPOUND WALL IN THE AREA OF AGE BR I UNDER GE MIS MHOW

Amount

Demolition of unreinforced cement concrete of any description in ground floors and pavings n.exc 15cm thickness complete all as directed and specified.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm grade aggregate) as in plinth protection, floor etc finished the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) 100mm thick as in filling sub base of floor complete all as specified and directed.

S&F in repair Machine cut kota stone slab flooring, 20-25 mm thick , laid over and including cement screed bed 20 mm thick in CM (1:4) laid and jointed with grey cement slurry , mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

All as per item No 4 here-in before but as in vertical surfaces such as skirting/ dados laid over and including 10mm thick backing coat in cement mortar 1:4, laid and jointed with grey cement slurry @ 3 Kg per square metre, mixed with pigment to match the shade of the slab including rubbing and polishing with wax polish, complete all as specified and directed

M&L for stone dust cushioning under interlocking paver block and including spreading, levelling ,watering and consolidation complete all as specified and directed.

S&F in repair machine pressed precast (factory made) concrete interlocking paver block rubber moulded of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over compacted dry sand and jointed with grey cement slurry and pigment and sides of paver blocks grouted with all as directed and specified. (Note: stone dust cushioning shall be measured and paid separately under relevant item.)

M&L for Providing, cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

S&F in repair coloured chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, laid jointed and pointed in neat cement slurry in floors over and including with cut and jointed in grey cement slurry and pigment and inculding laid over cement screed bed 15 mm thick in CM (1:4)complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to stores and rubbish off premises complete all as directed and specified.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as directed and specified.

M&L for Brickwork with fly ash brick with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as directed and specified..

All as per item No 12 here-in-before but except bricks. NOTE:- Old serviceable bricks obtained from demolition vide SI item No. 11 shall be re-used.

M&L for rendering 15 mm thick in CM 1:4 , mixed with liquid water proofing compound "200ML Per 50Kg of cement bag on fair faces of brick or concrete surfaces of wall ,and surfaces finished even and smooth without using extra cement complete all as directed and specified. NOTE:- WPC shall be measured and paid separetely under relevant item

M&L for rendering 15 mm thick in CM 1:6 on brick surface other than fair faces surfaces of wall and surfaces finished even and smooth without using extra cement complete all as directed and specified.

Taking down cement plaster of any description including racking out joints, hacking for key. scrubbing down with water etc complete all as directed and specified.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces and finished the surface fair and even etc complete all as directed and specified.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed

Supply only liquid water proofing compound.

M&L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash all as directed and specified.

M&L for Preparation of new plastered surfaces of wall and applying three coats of white wash all as directed and specified.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws etc. complete all as specified and directed by Engr-in-Charge. Note : Pre- painted galvalume aluminum zinc coating GI based profile pattern steel sheet shall be of make- TATA Blue scope colourbond XRW or other equivalent approved by GE.

S&F mild steel work(Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete as directed and specified.

S&F Mild steel framed work Fe-410-W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc.of any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out,in hard/dense soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified and directed.

M&L for Cement Concrete 1:3:6 type C2 (using 40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars & posts complete all as specified and directed.

S&F mild steel hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing incl cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets incl all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia complete all as specified and directed.

M&L for preparing new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of fencing wire mesh,any type complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

S&F in repair Mild steel round bar 10 mm dia and over cut to length band to shape required including cranking, bending spirally for similar work.conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde-E-165) complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

APconstruction

NIDHI CONSTRUCTION

Goyal Construction