Renovation of House No. 61, Officer Colony No. 4, Jharsa Road in Gurugram Distt.

Amount

Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade:Old work (one or more coats)(HSR 30.25.1) (Labour Rate)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work(HSR 30.28.1) (Labour Rate)

Providing and applying waterproofing treatment using two component 100% solid content, sqm hybrid polyurea/polyurethane, rapid curing and highly resHient fully bonded cured to membrane having a mixed density of 1.02g/l. Minimum recommended coverage rate is 1.5Hr/sqm in 2 coats to achieve a total DFT of 1.5mm. cured membrane shall exhibit: Manufacturers shall provide Certificate for Zero voe, resistance to fire, 25 years life expectancy test certificate before the start of work(HSR 28.7)

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface(HSR 30.37.1) (Labour Rate)

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-charge: Profile E Fixing with adjustable lugs with split end tail to metre jamb(HSR 13.3.3.1)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} Second class teak wood 35 mm thick shutters(HSR 12.7.1.1)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below(HSR 5.29.1)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters with ISi marked M.S. pressed butt hinges bright finished of required size Second class teak wood(HSR 12.19.1.1.1)

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Doors @400/- Each Note 1 :-In case of any difference in the unit & nomenclature of any of the HSR/DSR items of civil,PH work depicted in this DNIT and that given in HSR,the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (Make/brand exhibited in HSR/DSR and exhibited in approved standard documents) as approved by the Engineer-in-charge,while executing various items/work at site. 3. The agency to whom the work is allotted have to produce original bill/ voucher for all qty in taken of proof of Purchase of material

R K Chandra Construction

MAHENDER SINGH

SHRIN CONSTRUCTION COMPANY

Deepak Govt Contractor